Sunlu
PP
PP1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–250 °C |
| Bed | 60–100 °C |
| Speed | 30–80 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 0.9 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 22.7/–XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 900% |
| Flexural strength | 24MPa |
| Impact strength | 40/–XY/ZkJ/m² |
| Hardness | 67HD Shore |
| HDT (heat deflection) | 61°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.