SWISSFIL
Tough PLA
PLA2.85 mm
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 190–220 °C |
| Bed | 50–70 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 80 °C / 3 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40.7MPa |
|---|---|
| Tensile modulus | 2200MPa |
| Elongation at break | 3.4% |
| Flexural strength | 101.4MPa |
| Impact strength | 19.97kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.