The Virtual Foundry
Tungsten Filament (Rapid 3DShield)
Metal-W1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–250 °C |
| Bed | 40–65 °C |
| Speed | 60–130 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 8.5 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 23.3MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 7.57% |
| Flexural strength | 45.5MPa |
| Impact strength | 95.2kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.