UltiMaker
Nylon CF
PA-CF2.85 mm
Requires hardened nozzle
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 250–265 °C |
| Bed | 80–90 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.03 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 52.12MPa |
|---|---|
| Tensile modulus | 3886MPa |
| Elongation at break | 4.67% |
| Flexural strength | 70.36MPa |
| Impact strength | 24kJ/m² |
| Hardness | 70D Shore |
| HDT (heat deflection) | 135.4°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.