UltiMaker
TPU 95A
TPU2.85 mm
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 220–235 °C |
| Bed | 70 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 37.9MPa |
|---|---|
| Tensile modulus | 67MPa |
| Elongation at break | 700% |
| Flexural strength | 4.3MPa |
| Impact strength | 36kJ/m² |
| Hardness | 95A Shore |
| HDT (heat deflection) | 50.3°C |
| Glass transition (Tg) | — |
| VICAT | 115.7°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.