Verbatim
DURABIO
PC
Requires enclosure
Composition / filler: Bio-based polycarbonate + PMMA blend (DURABIO, Mitsubishi Chemical); BPA-free, derived from renewable isosorbide.
Print parameters
| Nozzle | 220–240 °C |
|---|---|
| Bed | 100 °C |
| Speed | 50 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.31 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 64MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | 94MPa |
| Impact strength | 9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.