3D4Makers
ABS-ESD
ABS
Requires enclosure
Print parameters
| Nozzle | 250–270 °C |
|---|---|
| Bed | 100–110 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.03 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 24.3MPa |
|---|---|
| Tensile modulus | 1121MPa |
| Elongation at break | 6.4% |
| Flexural strength | –MPa |
| Impact strength | 10.9kJ/m² |
| Hardness | 66.7D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 107 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.