Katalog filamentů

1776 filamentů

— žádné filtry

Materiál	Výrobce	Ø mm	Tryska(°C)ⓘ	Podložka(°C)ⓘ	Krytⓘ	Tvr. tryskaⓘ	Dryboxⓘ	Sušeníⓘ	Vicat(°C)ⓘ	HDT(°C)ⓘ	Tg(°C)ⓘ	Tah(MPa)ⓘ	Ohyb(MPa)ⓘ	Tažnost(%)ⓘ	Ráz(kJ/m²)ⓘ	Hustota(g/cm³)ⓘ	Flexⓘ	Foodⓘ	ESDⓘ	Outdoorⓘ	Dataⓘ	TDSⓘ
-CFJETCFJet	Filament PM ↗	1.75	220–250°C	80–90°C	–	✓	–	–	85	70	–	–	–	–	23	1.27	✗	✗	✗	–	✓	–
ABS3DXSTAT ESD-ABS	3DXTech ↗	1.75	230°C	110°C	✓	✗	✗	–	–	97	105	58	80	4	–	1.09	✗	✗	✓	✗	✓	📄
ABSABS	ERYONE ↗	1.75	230–270°C	95–110°C	✓	–	✗	–	–	78	–	43	66	22	29	1.04	✗	✗	✗	–	✓	📄
ABSABS	Fiberlogy ↗	1.75	250–265°C	90–110°C	✓	✗	–	60°C / 4h	97	100	–	45	68	2.5	18	1.05	✗	✗	✗	–	✓	📄
ABSABS	PrintWithSmile ↗	1.75	225–275°C	80–120°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
ABSABS	Kingroon ↗	1.75	230–260°C	90–120°C	✓	✗	✗	80°C / 8h	–	90	–	43	65	9	–	1.04	✗	✗	✗	–	✓	–
ABSABS	FILOALFA ↗	1.75	250–290°C	70–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
ABSABS	Bambu Lab ↗	1.75	240–270°C	80–100°C	✓	✗	–	80°C / 8h	94	84	–	33/28XY/Z	62/39XY/Z	10.5/4.7XY/Z	21.5/7.4XY/Z	1.05	✗	✗	✗	–	✓	📄
ABSABS	3DJAKE ↗	1.75	220–250°C	100–110°C	✓	✗	–	–	92	–	–	49	78	10	–	1.06	✗	✗	✗	–	✓	📄
ABSABS	Snapmaker ↗	1.75	245–265°C	80–100°C	✓	✗	✗	–	104	–	101	33.3	59	–	12.6	–	✗	✗	✗	–	✓	–
ABSABS	Atomic Filament ↗	1.75	235–255°C	105–125°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	Push Plastic ↗	2.85	230–250°C	90–110°C	✓	✗	✗	60°C / 4h	–	94	–	29	–	–	–	1.03	✗	✗	✗	–	✓	📄
ABSABS	Gembird ↗	1.75	225–240°C	80–110°C	✓	✗	✗	80°C / 8h	–	85	–	45	–	–	–	1.01	✗	✗	✗	–	✓	–
ABSABS	purefil ↗	1.75	210–260°C	80–110°C	✓	–	–	80°C / 4h	95	95	–	47	–	4	20	1.05	✗	✗	✗	–	✓	–
ABSABS	Aurapol ↗	1.75	230–250°C	100–110°C	✓	✗	✗	82°C / 3h	101	93	–	38	57	22	–	1.04	✗	✗	✗	–	✓	📄
ABSABS	Hatchbox ↗	1.75	210–240°C	80–100°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
ABSABS	Keene Village Plastics ↗	2.85	230–250°C	110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
ABSABS	Das Filament ↗	1.75	240–265°C	90–110°C	✓	✗	✗	60°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	Push Plastic ↗	1.75	230–250°C	90–110°C	✓	✗	✗	60°C / 4h	–	94	–	29	61	13	–	1.03	✗	✗	✗	–	✓	📄
ABSABS	3D4Makers ↗	2.85	240–280°C	90–110°C	✓	✗	✗	60°C / 4h	97	100	–	45	68	2.5	20	1.05	✗	✗	✗	–	✓	📄
ABSABS	Tronxy ↗	1.75	220–240°C	80–120°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	3D4Makers ↗	1.75	240–280°C	90–110°C	✓	✗	✗	60°C / 4h	97	100	–	45	68	2.5	20	1.05	✗	✗	✗	–	✓	📄
ABSABS	Filacraft ↗	1.75	270–280°C	90–110°C	✓	✗	✗	80°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	Anycubic ↗	1.75	240–280°C	80–100°C	✓	✗	✗	75°C / 10h	95	85	105	34	63	11	40	1.05	✗	✗	✗	–	✓	📄
ABSABS	Francofil ↗	2.85	240–270°C	80–110°C	✓	✗	✗	–	–	–	100	–	–	3.6	21.9	1.01	✗	✗	✗	–	✓	📄
ABSABS	Sunlu ↗	1.75	230–260°C	90–110°C	✓	✗	✓	80°C / ?h	86	95	108.9	42/–XY/Z	55	7.8	25/–XY/Z	1.02	✗	✗	✗	–	✓	📄
ABSABS	Elegoo ↗	1.75	250–280°C	90–100°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	Francofil ↗	1.75	240–270°C	80–110°C	✓	✗	✗	–	–	–	100	–	–	3.6	21.9	1.01	✗	✗	✗	–	✓	📄
ABSABS	Keene Village Plastics ↗	1.75	230–250°C	110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
ABSABS	Overture3D ↗	1.75	245–265°C	80–100°C	✓	✗	✗	75°C / 7h	103.4	–	–	–/21.3XY/Z	52.1	8.2	2.6	1.15	✗	✗	✗	–	✓	📄
ABSABS	Bavaria Filaments ↗	1.75	245–270°C	90–115°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	Printalot ↗	1.75	225–240°C	100–110°C	✓	✗	✗	–	90	–	–	–	–	–	–	1.05	✗	✗	✗	–	~	–
ABSABS	3DPower ↗	1.75	235–260°C	80–100°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	3DQF ↗	1.75	250–300°C	100°C	✓	✗	✗	40°C / 4h	–	97	107.5	39	58	–	37	1.05	✗	✗	✗	–	✓	📄
ABSABS	3DQF ↗	2.85	250–300°C	100°C	✓	✗	✗	40°C / 4h	–	97	107.5	39	58	–	37	1.05	✗	✗	✗	–	✓	📄
ABSABS	Filament PM ↗	1.75	220–260°C	100–110°C	✓	✗	–	–	96	89	–	–	–	–	20	1.04	✗	✗	✗	–	✓	📄
ABSABS	Qidi Tech ↗	1.75	240–280°C	100°C	✓	✗	✗	–	–	–	–	43	66	22	29	1.04	✗	✗	✗	–	✓	📄
ABSABS	BCN3D ↗	2.85	240–260°C	85–95°C	✓	✗	✗	–	–	71	80	29.5	48.3	10.9	32	1.075	✗	✗	✗	–	✓	📄
ABSABS	Ooznest ↗	1.75	235–255°C	90–110°C	✓	–	–	–	103	–	–	38	–	9	35	1.03	✗	✗	✗	–	✓	📄
ABSABS	CR-3D ↗	1.75	260°C	100°C	✓	✗	✗	–	–	95	–	40	–	48	20	1.05	✗	✗	✗	–	✓	📄
ABSABS	Material4Print ↗	1.75	240–270°C	90–110°C	✓	–	–	–	–	81	–	32	–	20	–	1.04	✗	✗	✗	–	✓	📄
ABSABS	UltiMaker ↗	2.85	225–260°C	80–90°C	✓	✗	✗	–	93.8	86.6	100.5	33.9	61.1	4.6	14.2	1.1	✗	✗	✗	–	✓	📄
ABSABS	Numakers ↗	1.75	240–260°C	90–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	JAYO ↗	1.75	240–270°C	80–120°C	✓	✗	✗	80°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS	C-TECH ↗	1.75	240–260°C	90–100°C	✓	✗	✗	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS "NOT DEAD"	Filament PM ↗	1.75	220–260°C	100–110°C	✓	✗	–	–	96	89	–	–	–	–	20	1.04	✗	✗	✗	–	✓	📄
ABSABS 10^8	FILOALFA ↗	1.75	240–260°C	70–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
ABSABS 702	Nebula Filaments ↗	2.85	230–260°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS 702	Nebula Filaments ↗	1.75	230–260°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS AF	Nanovia ↗	1.75	240–260°C	100–110°C	✓	✗	–	–	–	–	110	22/20XY/Z	–	2.4/3.5XY/Z	17.59	1.04	✗	✗	✗	–	✓	–
ABSABS EF	Nanovia ↗	1.75	240–260°C	100–110°C	✓	✗	–	–	102	–	110	29/26XY/Z	–	2.3/2.1XY/Z	18	1.03	✗	✗	✗	–	✓	–
ABSABS ESD	Nanovia ↗	1.75	250–280°C	100–110°C	✓	✗	–	–	–	88	100	22/17XY/Z	–	2.4/1.6XY/Z	–	1.1	✗	✗	✓	–	✓	–
ABSABS ESD	Fiberlogy ↗	1.75	250–265°C	90–110°C	✓	✗	–	60°C / 4h	–	–	–	55	–	5	–	1.05	✗	✗	✓	–	✓	📄
ABSABS ESD	eSUN ↗	1.75	250–280°C	70–90°C	✓	✗	✓	70°C / 8h	–	96	–	38	–	4.8	19.29	0.97	✗	✗	✓	–	✓	–
ABSABS Extrafill	Fillamentum ↗	1.75	220–240°C	80–105°C	✓	✗	✗	–	96	81	–	39	60	20	–	1.04	✗	✗	✗	✗	✓	📄
ABSABS Glowing	Nebula Filaments ↗	1.75	240–250°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS Glowing	Nebula Filaments ↗	2.85	240–250°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS HS	FILOALFA ↗	1.75	240–260°C	80–100°C	✓	✗	✗	70°C / ?h	105	–	–	45	60	12	25	1.04	✗	✗	✗	–	✓	📄
ABSABS High Speed	Gembird ↗	1.75	225–240°C	80–100°C	✓	✗	✗	80°C / 8h	–	75	–	40	–	–	–	1.01	✗	✗	✗	–	✓	–
ABSABS High-Speed	ERYONE ↗	1.75	240°C	80–110°C	✓	–	–	95°C / 12h	–	95	–	15.68/13.16XY/Z	–	10.16/5.11XY/Z	–	1.1	✗	✗	✗	–	✓	📄
ABSABS Kevlar	3D4Makers ↗	1.75	250–270°C	100°C	✓	✓	✗	60°C / 4h	95	75	–	35	–	–	6	1.05	✗	✗	✗	–	✓	📄
ABSABS Kevlar	3D4Makers ↗	2.85	250–270°C	100°C	✓	✓	✗	60°C / 4h	95	75	–	35	–	–	6	1.05	✗	✗	✗	–	✓	📄
ABSABS MG94	3D Fila ↗	1.75	235–260°C	100–110°C	✓	✗	✗	–	–	–	107	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS Marble Gray	Nebula Filaments ↗	1.75	240–250°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS Marble Gray	Nebula Filaments ↗	2.85	240–250°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS Matt	CR-3D ↗	1.75	270°C	110°C	✓	✗	✓	–	–	100	–	42	–	50	20	1.05	✗	✓	✗	–	✓	📄
ABSABS Matte	Matter3D ↗	1.75	250–285°C	110°C	✓	✗	✗	–	–	–	–	–	–	–	–	1.05	✗	✗	✗	–	~	–
ABSABS Odorless	Qidi Tech ↗	1.75	240–260°C	100–110°C	✓	✗	✗	75°C / 5h	103	86	101	38.96/26.16XY/Z	67.81/–XY/Z	5.77/1.62XY/Z	20.03/–XY/Z	1.05	✗	✗	✗	–	✓	📄
ABSABS Plus	Fiberlogy ↗	1.75	250–270°C	90–110°C	✓	✗	–	60°C / 4h	97	100	–	45	68	2.5	18	1.05	✗	✗	✗	–	✓	📄
ABSABS Plus	ERYONE ↗	1.75	230°C	80–110°C	✓	–	–	95°C / 12h	90	73	–	40.7/22.7XY/Z	–	20.3/8.9XY/Z	–	1.05	✗	✗	✗	–	✓	📄
ABSABS Plus	Azure Film ↗	1.75	230–260°C	90–120°C	✓	✗	✗	–	–	94	–	32.1	50.7	–	–	1.04	✗	✗	✗	–	✓	📄
ABSABS Premium+	3D Fila ↗	1.75	235–260°C	100–110°C	✓	✗	✗	–	–	–	107	–	–	–	–	1.06	✗	✗	✗	–	~	–
ABSABS Prime	Azure Film ↗	1.75	235–255°C	90°C	✓	✗	✗	–	–	97	–	30.9	47.3	–	55.5	1.13	✗	✗	✗	–	✓	📄
ABSABS Prime	Coex3D ↗	1.75	245–265°C	90–110°C	✓	✗	✗	82°C / 6h	–	–	–	–	–	–	–	1.04	✗	✗	✗	–	~	–
ABSABS Rapido	Qidi Tech ↗	1.75	220–250°C	80–100°C	–	–	–	–	95	85	–	41	77.5	11	40	1.05	✗	✗	✗	–	✓	📄
ABSABS Standard	Coex3D ↗	1.75	245–265°C	90–110°C	✓	✗	✗	82°C / 6h	–	–	–	–	–	–	–	1.03	✗	✗	✗	–	~	–
ABSABS Thermo	Nebula Filaments ↗	1.75	240–250°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS Thermo	Nebula Filaments ↗	2.85	240–250°C	90–100°C	✓	✗	✗	–	94	81	–	44	64	13	–	1.04	✗	✗	✗	–	✓	📄
ABSABS V0	FILOALFA ↗	1.75	240–260°C	80–100°C	✓	✗	✗	75°C / 3h	94	95	–	42.2	66.7	–	2.45	1.19	✗	✗	✗	–	✓	📄
ABSABS+	Geeetech ↗	1.75	220–250°C	95–110°C	✓	✗	✗	60°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSABS+	Devil Design ↗	1.75	230–240°C	90–100°C	✓	✗	✗	–	94	–	–	42	–	30	–	1.04	✗	✗	✗	✗	✓	📄
ABSABS+	Filament Unger ↗	1.75	245–275°C	90–110°C	✓	✗	✗	60°C / 4h	–	90	–	–	–	–	30	1.02	✗	✗	✗	–	✓	📄
ABSABS-ESD	3D4Makers ↗	2.85	250–270°C	100–110°C	✓	✗	✗	60°C / 4h	–	–	107	24.3	–	6.4	10.9	1.03	✗	✗	✓	–	✓	📄
ABSABS-ESD	CR-3D ↗	1.75	260°C	110°C	✓	✗	✗	–	–	–	–	20	–	5	40	1.12	✗	✗	✓	–	✓	📄
ABSABS-ESD	3D4Makers ↗	1.75	250–270°C	100–110°C	✓	✗	✗	60°C / 4h	–	–	107	24.3	–	6.4	10.9	1.03	✗	✗	✓	–	✓	📄
ABSABS-HF	Mingda ↗	1.75	230–250°C	80–90°C	✗	✗	✗	70°C / 5h	–	65	80	37	58	4	23.16	1.05	✗	✗	✗	–	✓	📄
ABSABS-Metal	Qidi Tech ↗	1.75	220–250°C	80–100°C	–	–	–	–	91	75	–	35.5/–XY/Z	75/–XY/Z	3/–XY/Z	25/–XY/Z	1.06	✗	✗	✗	–	✓	📄
ABSABS-R Recycled	purefil ↗	1.75	210–260°C	80–110°C	✓	–	–	80°C / 4h	–	95	–	47	–	–	–	1.05	✗	✗	✗	–	✓	–
ABSABS-T	Filament PM ↗	1.75	220–260°C	100–110°C	✓	✗	–	–	96	89	–	–	–	–	20	1.04	✗	✗	✗	–	✓	📄
ABSABSpro	FormFutura ↗	1.75	230–255°C	100–110°C	✓	✗	✗	55°C / 12h	93	85	–	45.1	72.6	10	–	1.05	✗	✗	✗	–	✓	📄
ABSABSpro Flame Retardant	FormFutura ↗	1.75	240–265°C	100–110°C	✓	✗	✗	55°C / 12h	104	90	–	60	110	–	–	1.17	✗	✗	✗	–	✓	📄
ABSABSx	Nobufil ↗	1.75	250–270°C	90–110°C	✓	✗	✗	65°C / 4h	–	86	–	38	58	11	4	1.08	✗	✗	✗	–	✓	📄
ABSABSx ESD	Nobufil ↗	1.75	250–270°C	90–110°C	✓	✗	✗	65°C / 4h	–	–	–	38	58	–	–	1.08	✗	✗	✓	–	✓	📄
ABSAbs	eSUN ↗	1.75	230–270°C	95–110°C	✓	✗	–	–	–	78	–	43	66	22	–	1.04	✗	✗	✗	–	✓	📄
ABSAbs Gp450	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✗	✗	–	94	–	–	39	–	13	450	1.04	✗	✗	✗	–	✓	📄
ABSAbs Medical	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✗	✗	–	94	–	–	47	–	16	14	1.06	✗	✗	✗	–	✓	📄
ABSAbs Odorless	eSUN ↗	1.75	240–250°C	95–110°C	✓	✗	–	–	–	73	–	46.8	54.9	24.4	–	1.04	✗	✗	✗	–	✓	📄
ABSAbs Pro	eSUN ↗	1.75	230–270°C	95–110°C	✓	✗	✓	60°C / 8h	–	73	–	40.12/14.94XY/Z	59.5/21.4XY/Z	5.54/2.12XY/Z	26.45/1.77XY/Z	1.06	✗	✗	✗	–	✓	📄
ABSAmbrosia Uber ABS	The Virtual Foundry ↗	1.75	225–250°C	75–110°C	✓	–	–	–	–	85	–	33	65	9	12	1.08	✗	✗	✗	–	✓	–
ABSDuraPro ABS	Extrudr ↗	1.75	220–250°C	100–110°C	✓	–	✗	–	92	85	–	49	78	10	220	1.06	✗	✗	✗	–	✓	📄
ABSESD-ABS	Material4Print ↗	1.75	250–275°C	90–110°C	✓	–	–	–	104	88	–	32	–	10	–	1.1	✗	✗	✓	–	✓	📄
ABSEabs Ht	eSUN ↗	1.75	240–260°C	100–120°C	✓	✗	–	–	–	104.4	–	–/35.7XY/Z	60.7/–XY/Z	–/3.78XY/Z	14/–XY/Z	1.04	✗	✗	✗	–	✓	📄
ABSEabs Max	eSUN ↗	1.75	240–270°C	95–110°C	✓	✗	✓	65°C / 3h	–	–	–	45	58	30	–	1.05	✗	✗	✗	–	✓	📄
ABSEabshs	eSUN ↗	1.75	230–270°C	95–110°C	✓	✗	✓	60°C / 8h	–	–	–	41.64/27.08XY/Z	46/44.5XY/Z	5.14/3.4XY/Z	25.94/3.14XY/Z	1.04	✗	✗	✗	–	✓	📄
ABSEasy ABS	Fiberlogy ↗	1.75	235–255°C	90–110°C	✓	✗	–	60°C / 4h	–	70	–	44	64	45	–	1.09	✗	✗	✗	–	✓	📄
ABSEasy ABS	Sunlu ↗	1.75	230–260°C	80–100°C	✓	✗	✓	70°C / ?h	64	59.6	–	35/–XY/Z	57.5	13	15/7.5XY/Z	1.06	✗	✗	✗	–	✓	📄
ABSEasyFil ABS	FormFutura ↗	1.75	230–255°C	100°C	✓	✗	✗	–	93	85	–	45.1	72.6	10	–	1.05	✗	✗	✗	–	✓	📄
ABSEasyFil ABS - Glow in the Dark	FormFutura ↗	1.75	230–255°C	100°C	✓	✗	✗	40°C / 6h	93	85	–	45.1	72.6	10	–	1.05	✗	✗	✗	–	✓	📄
ABSFlame Retardant ABS	Coex3D ↗	1.75	240–260°C	95–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSHyper ABS	Creality ↗	1.75	230–270°C	75–95°C	✓	✗	–	–	–	–	–	30.4	48.1	–	19	–	✗	✗	✗	–	✓	–
ABSM-ABS	PrintWithSmile ↗	1.75	235–250°C	80–100°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
ABSMABS 203	Nebula Filaments ↗	2.85	230–260°C	90–100°C	✓	✗	✗	–	–	84	–	–	80.4	–	–	1.09	✗	✗	✗	–	✓	📄
ABSMABS 203	Nebula Filaments ↗	1.75	230–260°C	90–100°C	✓	✗	✗	–	–	84	–	–	80.4	–	–	1.09	✗	✗	✗	–	✓	📄
ABSMH Build Series ABS	MatterHackers ↗	1.75	220–260°C	90–110°C	✓	✗	✗	–	–	78	–	43	–	22	–	1.04	✗	✗	✗	–	✓	📄
ABSMH Build Series ABS	MatterHackers ↗	2.85	220–260°C	90–110°C	✓	✗	✗	–	–	78	–	43	–	22	–	1.04	✗	✗	✗	–	✓	📄
ABSOmega Impact ABS	BCN3D ↗	1.75	260°C	85–95°C	✓	✗	✗	–	–	–	107	35.3	43.6	9.8	24.7	1.035	✗	✗	✗	–	✓	📄
ABSPC/ABS	Fiberlogy ↗	1.75	260–280°C	80–100°C	✓	✗	–	70°C / 4h	113	–	–	42	68	7	53	1.07	✗	✗	✗	–	✓	📄
ABSPRO Series ABS	MatterHackers ↗	1.75	230–260°C	80–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
ABSPRO Series ABS	MatterHackers ↗	2.85	230–260°C	80–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
ABSPerformance ABS	Matter3D ↗	1.75	250–270°C	110°C	✓	✗	✗	–	–	–	–	–	–	–	–	1.05	✗	✗	✗	–	~	–
ABSPolyLite ABS	Polymaker ↗	1.75	245–265°C	90–100°C	✓	✗	✗	70°C / 6h	104	98	101	–/29.7XY/Z	56.2	17.9	18	1.04	✗	✗	✗	–	✓	📄
ABSPremium ABS	Raise3D ↗	1.75	245–265°C	90–105°C	✓	✗	✗	–	104	100	101	33	59	2.7	12.6	1.12	✗	✗	✗	–	✓	📄
ABSPremium ABS Medical	FormFutura ↗	1.75	235–260°C	90–100°C	✓	✗	✓	85°C / 6h	96	–	–	48	–	16	–	1.06	✗	✗	✗	–	✓	📄
ABSPrimaSelect ABS	PrimaCreator ↗	1.75	220–250°C	80–100°C	✓	✗	✗	–	95	85	–	41	77.5	11	40	1.05	✗	✗	✗	✗	✓	📄
ABSPrimaSelect ABS Flame Retardant	PrimaCreator ↗	1.75	240–270°C	90–110°C	✓	✗	✗	–	110	–	–	65.1	–	62	–	1.18	✗	✗	✗	–	✓	📄
ABSPrimaSelect ABS Metal-Shine	PrimaCreator ↗	1.75	220–250°C	80–100°C	✓	✗	✗	–	91	75	–	35.5	75	3	25	1.06	✗	✗	✗	–	✓	📄
ABSPrimaSelect ABS+	PrimaCreator ↗	1.75	240–260°C	80–90°C	✓	✗	✗	–	97	–	–	43.6	–	34	58	1.1	✗	✗	✗	–	✓	📄
ABSPrimaValue ABS	PrimaCreator ↗	1.75	220–270°C	–	✓	✗	✗	–	103	–	–	42	–	–	–	1.03	✗	✗	✗	–	✓	📄
ABSPro ABS	3D-Fuel ↗	1.75	240–260°C	100–110°C	✓	✗	✗	80°C / 3h	–	86	–	51	78	30	–	1.04	✗	✗	✗	–	✓	📄
ABSReForm - rTitan	FormFutura ↗	1.75	240–260°C	80–90°C	✗	✗	–	–	97	–	–	43.6	–	34	58	1.1	✗	✗	✗	–	✓	📄
ABSSmart Abs	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✗	✗	–	–	93	–	45.1	72.5	10	33	1.05	✗	✗	✗	–	✓	📄
ABSSmooth ABS	Print-Me ↗	2.85	220–260°C	80–120°C	✓	✗	✗	–	–	90	–	–	–	–	14	1.01	✗	✗	✗	–	✓	–
ABSSmooth ABS	Print-Me ↗	1.75	220–260°C	80–120°C	✓	✗	✗	–	–	90	–	–	–	–	14	1.01	✗	✗	✗	–	✓	–
ABSSmooth ABS ESD	Print-Me ↗	2.85	220–260°C	80–120°C	✓	✗	✗	–	–	–	–	–	–	–	14	1.01	✗	✗	✓	–	~	–
ABSSmooth ABS ESD	Print-Me ↗	1.75	220–260°C	80–120°C	✓	✗	✗	–	–	–	–	–	–	–	14	1.01	✗	✗	✓	–	~	–
ABSTitanX	FormFutura ↗	1.75	245–270°C	100–110°C	✓	✗	✗	52°C / 12h	93	85	–	460	740	10	–	1.05	✗	✗	✗	–	✓	📄
ABSUltrafuse ABS	Forward AM ↗	1.75	240–260°C	90–110°C	✓	✗	✗	60°C / 10h	96	90	104	36.3	56.6	7.4	16	1.037	✗	✗	✗	✗	✓	📄
ABSrABS	add:north ↗	2.85	220–230°C	95–105°C	✓	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSrABS	add:north ↗	1.75	220–230°C	95–105°C	✓	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABSrABS	Filamentive ↗	1.75	230–250°C	80–110°C	✓	✗	✗	80°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABS-CFABS CF	3DJAKE ↗	1.75	220–250°C	100–110°C	✓	✓	–	–	98	87	–	59	85	7	14	1.08	✗	✗	✗	–	✓	📄
ABS-CFABS CF	Nanovia ↗	1.75	240–260°C	100–110°C	✓	✓	–	–	–	–	110	29/23XY/Z	–	1.5/1.7XY/Z	16.05	1.05	✗	✗	✗	–	✓	–
ABS-CFABS-CF	Atomic Filament ↗	1.75	235–255°C	105–125°C	✓	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
ABS-CFABS-CF	Kingroon ↗	1.75	240–270°C	100–120°C	✓	✓	✗	80°C / 8h	–	108	–	55	85	4	–	1.12	✗	✗	✗	–	✓	–
ABS-CFABS-CF	ERYONE ↗	1.75	240–280°C	90–110°C	✓	✓	–	95°C / 12h	–	95	–	27.3/16XY/Z	–	–	–	1.1	✗	✗	✗	–	✓	📄
ABS-CFABS-CF 10%	Matter3D ↗	1.75	250–285°C	110°C	✓	✓	✓	–	–	–	–	–	–	–	–	1.05	✗	✗	✗	–	~	–
ABS-CFABS-CF20	Mingda ↗	1.75	250–270°C	100–110°C	✓	✓	✗	65°C / 5h	–	83	–	48	80	1	8	1.09	✗	✗	✗	–	✓	📄
ABS-CFAbs Kevlar	Spectrum Filaments ↗	1.75	250–270°C	80–100°C	✓	✓	✗	–	88	75	–	–	–	6	6.1	1.05	✗	✗	✗	–	✓	📄
ABS-CFCarbon Fiber ABS	Push Plastic ↗	2.85	230–240°C	110°C	✓	✓	✗	60°C / 4h	–	105	–	42	–	–	–	1.02	✗	✗	✗	–	✓	📄
ABS-CFCarbon Fiber ABS	Push Plastic ↗	1.75	230–240°C	110°C	✓	✓	✗	60°C / 4h	–	105	–	42	84	1	–	1.02	✗	✗	✗	–	✓	📄
ABS-CFCarbonX ABS+CF	3DXTech ↗	1.75	230°C	110°C	✓	✓	✗	–	–	76	105	46	76	2	–	1.11	✗	✗	✗	✗	✓	📄
ABS-CFDuraPro ABS CF	Extrudr ↗	1.75	220–250°C	100–110°C	✓	✓	✗	–	92	85	–	49	78	10	220	1.06	✗	✗	✗	–	✓	📄
ABS-CFEabs Cf	eSUN ↗	1.75	240–270°C	100–110°C	✓	✓	✓	–	–	94.9	–	–/29.9XY/Z	76.2/–XY/Z	–/5.7XY/Z	3.5/–XY/Z	1.06	✗	✗	✗	–	✓	📄
ABS-GFABS FibCR20	CR-3D ↗	1.75	270°C	100°C	✓	✓	✓	70°C / 4h	–	110	–	70	–	1.6	6	1.18	✗	✗	✗	–	✓	📄
ABS-GFABS GF	Fiberlogy ↗	1.75	270–295°C	90°C	✓	✓	–	60°C / 4h	95	80	–	50	70	3.5	10	1.12	✗	✗	✗	–	✓	📄
ABS-GFABS GF10	purefil ↗	1.75	210–260°C	80–110°C	✓	✓	–	80°C / 4h	–	100	–	47	–	–	–	1.11	✗	✗	✗	–	✓	–
ABS-GFABS-GF	ERYONE ↗	1.75	240–280°C	80–100°C	✓	✓	–	60°C / 4h	–	82	104	37.2/19.2XY/Z	–	2/1.6XY/Z	–	–	✗	✗	✗	–	✓	📄
ABS-GFABS-GF	Bambu Lab ↗	1.75	240–280°C	80–100°C	✓	✓	–	80°C / 8h	103	88/–XY/Z	–	36/29XY/Z	68/46XY/Z	6.3/2.3XY/Z	4.2/5.3XY/Z	1.08	✗	✗	✗	–	✓	📄
ABS-GFABS-GF	Sunlu ↗	1.75	240–260°C	90–110°C	✓	✓	✓	80°C / ?h	95	104	135	54/–XY/Z	90	10	6.7/4.9XY/Z	1.016	✗	✗	✗	–	✓	📄
ABS-GFABS-GF25	Mingda ↗	1.75	250–270°C	100–110°C	✓	✓	✗	65°C / 5h	–	93	101	48.48	78.8	2.1	8.91	1.15	✗	✗	✗	–	✓	📄
ABS-GFABS-GF25	Qidi Tech ↗	1.75	250–270°C	100–110°C	–	✓	–	70°C / 5h	–	81	103	48.48/30.48XY/Z	78.8/–XY/Z	2.1/2.2XY/Z	8.91/–XY/Z	1.15	✗	✗	✗	–	✓	📄
ABS-GFEabs Gf	eSUN ↗	1.75	240–270°C	100–120°C	✓	✓	✓	–	–	96.1	–	–/27.2XY/Z	76.4/–XY/Z	–/3.98XY/Z	5.6/–XY/Z	1.07	✗	✗	✗	–	✓	📄
ABS-GFFibreX ABS+GF	3DXTech ↗	1.75	245°C	110°C	✓	✓	✗	–	–	98	105	68	70	2	–	1.15	✗	✗	✗	✗	✓	📄
ABS-PCABS-PC	Material4Print ↗	1.75	260–290°C	90–120°C	✓	–	–	–	–	122	100	54	–	4.4	–	1.13	✗	✗	✗	–	✓	📄
ASA3DXMAX ASA	3DXTech ↗	1.75	235–255°C	90–110°C	✓	✗	✗	–	–	95	105	45	78	10	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Azure Film ↗	1.75	240–260°C	90–120°C	✓	✗	✗	–	–	86	–	41.1	64.8	–	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Filament PM ↗	1.75	240–270°C	–	✓	✗	–	–	96	87	–	–	–	–	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	SWISSFIL ↗	2.85	210–260°C	80–100°C	–	–	–	80°C / 3h	–	92	–	49	–	35	–	1.045	✗	✗	✗	✓	✓	📄
ASAASA	3D4Makers ↗	2.85	240–280°C	90–110°C	✓	✗	✗	60°C / 4h	95	86	–	47.1	75.5	25	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Numakers ↗	1.75	240–260°C	90–105°C	✓	✗	✗	75°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Francofil ↗	1.75	240–270°C	90–110°C	✓	✗	✗	–	–	–	100	–	–	4.9	19.2	1.06	✗	✗	✗	✓	✓	📄
ASAASA	Push Plastic ↗	1.75	235–255°C	90–110°C	✓	✗	✗	60°C / 4h	–	96	–	31	62	10	–	1.06	✗	✗	✗	✓	✓	📄
ASAASA	Atomic Filament ↗	1.75	240–260°C	90–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	colorFabb ↗	1.75	240–260°C	90–100°C	✓	–	–	–	–	87	–	45	–	6.5	10.5	1.07	✗	✗	✗	✓	✓	📄
ASAASA	C-TECH ↗	1.75	240–260°C	80–100°C	✓	✗	✗	75°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Gembird ↗	1.75	230–250°C	80–120°C	✓	✗	✗	75°C / 5h	–	92	–	–	–	–	–	1.057	✗	✗	✗	✓	~	–
ASAASA	Abaflex ↗	1.75	250–280°C	90–110°C	✓	✗	✗	–	–	86.5	–	42.2	64.1	35	–	1.07	✗	✗	✗	✓	✓	–
ASAASA	Aurapol ↗	1.75	255–265°C	105–115°C	✓	✗	✗	80°C / 3h	94	96	–	40	–	35	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	purefil ↗	1.75	210–260°C	80–110°C	✓	–	–	80°C / 4h	–	96	–	45	–	–	–	1.07	✗	✗	✗	✓	✓	–
ASAASA	Sunlu ↗	1.75	250–280°C	80–100°C	✓	✗	✓	80°C / ?h	105	96	108	50/–XY/Z	73	20	18/–XY/Z	1.05	✗	✗	✗	✓	✓	📄
ASAASA	Bavaria Filaments ↗	1.75	245–270°C	90–115°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	PrintWithSmile ↗	1.75	220–250°C	80–120°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Prusament ↗	1.75	250–270°C	105–115°C	✓	✗	✗	93°C / ?h	–	86	–	42/45XY/Z	64/69XY/Z	3.4/3.8XY/Z	12/15XY/Z	1.07	✗	✗	✗	✓	✓	📄
ASAASA	3DJAKE ↗	2.85	210–250°C	60–100°C	✓	✗	–	–	95	–	–	78.48	–	–	–	1.1	✗	✗	✗	✓	✓	📄
ASAASA	3DPower ↗	1.75	230–260°C	80–100°C	✓	✗	✗	70°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Bambu Lab ↗	1.75	240–270°C	80–100°C	✓	✗	–	80°C / 8h	106	–	–	37/31XY/Z	65/40XY/Z	9.2/4.6XY/Z	19.6/4.9XY/Z	1.05	✗	✗	✗	✓	✓	📄
ASAASA	Fiberlogy ↗	1.75	255–270°C	90–110°C	✓	✗	–	80°C / 4h	96	87	–	43	–	25	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Francofil ↗	2.85	240–270°C	90–110°C	✓	✗	✗	–	–	–	100	–	–	4.9	19.2	1.06	✗	✗	✗	✓	✓	📄
ASAASA	CR-3D ↗	1.75	260°C	100°C	✓	✗	✓	70°C / 4h	97	96	–	40	–	–	12	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Mingda ↗	1.75	240–270°C	90–110°C	✓	✗	✗	75°C / 5h	–	90	98	39	65	5	13	1.1	✗	✗	✗	✓	✓	📄
ASAASA	Mingda ↗	2.85	240–270°C	90–110°C	✓	✗	✗	75°C / 5h	–	90	–	39	–	–	–	1.1	✗	✗	✗	✓	✓	📄
ASAASA	Overture3D ↗	1.75	240–270°C	70–95°C	✓	✗	✗	75°C / 7h	106.2	–	–	–/33.1XY/Z	74.9	4.2	13.1	1.14	✗	✗	✗	✓	✓	📄
ASAASA	Qidi Tech ↗	1.75	240–260°C	100–110°C	✓	✗	✗	75°C / 5h	101	83	98	38.5/27.87XY/Z	64.49/–XY/Z	5.2/2.43XY/Z	12.9/–XY/Z	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Kingroon ↗	1.75	240–260°C	90–110°C	✓	✗	✗	75°C / 6h	–	96	–	47	–	–	–	1.07	✗	✗	✗	✓	✓	–
ASAASA	Push Plastic ↗	2.85	235–255°C	90–110°C	✓	✗	✗	60°C / 4h	–	96	–	31	–	–	–	1.06	✗	✗	✗	✓	✓	📄
ASAASA	Devil Design ↗	1.75	230–240°C	90–100°C	✓	✗	✗	–	96	–	–	49	–	20	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	Filamentive ↗	1.75	230–260°C	80–100°C	✓	✗	✗	80°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	📄
ASAASA	Geeetech ↗	1.75	240–270°C	80–110°C	✓	✗	✗	60°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	3DQF ↗	1.75	230–240°C	95–105°C	✓	✗	✗	60°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Material4Print ↗	1.75	240–270°C	90–110°C	✓	✗	✗	–	–	84	–	50	–	20	–	1.06	✗	✗	✗	✓	✓	📄
ASAASA	Filacraft ↗	1.75	260–280°C	90–110°C	✓	✗	✗	80°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Ooznest ↗	1.75	235–255°C	80–90°C	✓	–	–	–	98	–	–	47.5	–	15	18	1.11	✗	✗	✗	✓	✓	📄
ASAASA	3D4Makers ↗	1.75	240–280°C	90–110°C	✓	✗	✗	60°C / 4h	95	86	–	47.1	75.5	25	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA	ERYONE ↗	1.75	230–260°C	75–90°C	✓	–	✗	85°C / 12h	106	95	–	30.2/15XY/Z	–	–	–	1.05	✗	✗	✗	✓	✓	📄
ASAASA	Elegoo ↗	1.75	250–280°C	90–100°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA	Nanovia ↗	1.75	250–270°C	100–110°C	✓	✗	–	–	–	79	100	47	65	20	–	1.07	✗	✗	✗	✓	✓	–
ASAASA	3DJAKE ↗	1.75	210–250°C	60–100°C	✓	✗	–	–	95	–	–	78.48	–	–	–	1.1	✗	✗	✗	✓	✓	📄
ASAASA	Anycubic ↗	1.75	255–275°C	80–100°C	✓	✗	✗	75°C / 10h	95	90	103	41	62	15	36	1.07	✗	✗	✗	✓	✓	📄
ASAASA	SWISSFIL ↗	1.75	210–260°C	80–100°C	✓	✗	✗	80°C / 3h	–	92	–	49	–	35	–	1.045	✗	✗	✗	✓	✓	📄
ASAASA 301	Nebula Filaments ↗	1.75	240–270°C	90–105°C	✓	✗	✗	75°C / 4h	105	–	–	43.2	63.7	55	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA 301	Nebula Filaments ↗	2.85	240–270°C	90–105°C	✓	✗	✗	75°C / 4h	105	–	–	43.2	63.7	55	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA Aero	Bambu Lab ↗	1.75	240–280°C	80–90°C	✓	✗	–	80°C / 8h	80	–	–	32/21XY/Z	58/24XY/Z	5.1/2.3XY/Z	8.2/3.4XY/Z	0.99	✗	✗	✗	✓	✓	📄
ASAASA Extrafill	Fillamentum ↗	1.75	240–255°C	90–105°C	✓	✗	✗	–	94	86	–	40	62	35	–	1.07	✗	✗	✗	✓	✓	📄
ASAASA High-Speed	ERYONE ↗	1.75	230°C	75–90°C	✓	–	–	95°C / 12h	106	82	–	34.8/19XY/Z	–	1.9/1.7XY/Z	–	1.05	✗	✗	✗	✓	✓	📄
ASAASA Prime	Coex3D ↗	1.75	240–265°C	90–110°C	✓	✗	✗	65°C / 8h	–	–	–	–	–	–	–	1.07	✗	✗	✗	✓	~	–
ASAASA Prime	Azure Film ↗	1.75	230–250°C	90°C	✓	✗	✗	–	–	97	–	37.6	56	–	13.9	1.15	✗	✗	✗	✓	✓	📄
ASAASA WP	3D Fila ↗	1.75	235–270°C	95–120°C	✓	✗	✗	75°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA-Aero	Qidi Tech ↗	1.75	240–280°C	80–110°C	✓	✗	–	–	–	55	–	8.25/7.86XY/Z	14.31/–XY/Z	11.52/5.54XY/Z	2.29/–XY/Z	1.03	✗	✗	✗	✓	✓	📄
ASAASA-CF	Atomic Filament ↗	1.75	240–260°C	110–120°C	✓	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAASA-R Recycled	purefil ↗	1.75	210–260°C	80–110°C	✓	–	–	80°C / 4h	–	96	–	–	–	–	–	1.07	✗	✗	✗	✓	~	–
ASAASA-X	CR-3D ↗	1.75	270°C	100°C	✓	✗	✓	–	–	105	–	43	–	49	25	1.06	✗	✓	✗	✓	✓	📄
ASAASAx	Nobufil ↗	1.75	250–270°C	100–120°C	✓	✗	✗	65°C / 4h	–	91	–	36	60	15	9	1.07	✗	✗	✗	✓	✓	📄
ASAASAx-CF	Nobufil ↗	1.75	270–290°C	100–120°C	✓	✓	✗	65°C / 4h	–	104	–	26	38	9	3	1.07	✗	✗	✗	✓	✓	📄
ASAAmbrosia ASA	The Virtual Foundry ↗	1.75	230–260°C	100–115°C	✓	–	–	–	–	88	–	42	75	9	19	1.08	✗	✗	✗	✓	✓	–
ASAApolloX	FormFutura ↗	1.75	235–255°C	90–110°C	✓	✗	–	–	98	–	–	47.5	–	15	18	1.11	✗	✗	✗	✓	✓	📄
ASAApolloX CF10	FormFutura ↗	1.75	240–265°C	90–110°C	✓	✓	✓	–	101.6	100.5	–	79	–	1.8	–	1.1	✗	✗	✗	✓	✓	📄
ASAApolloX Flame Retardant	FormFutura ↗	1.75	230–280°C	90–110°C	✓	✗	✓	–	90	86	–	42	64	35	–	1.08	✗	✗	✗	✓	✓	📄
ASAApolloX Foaming	FormFutura ↗	1.75	220–285°C	50–90°C	✓	✗	✓	70°C / 12h	94	86	–	42	64	35	–	1.07	✗	✗	✗	✓	✓	📄
ASAApolloX Kevlar	FormFutura ↗	1.75	255–265°C	85–95°C	✗	✓	✓	–	94	95	–	40	–	6	7.5	1.07	✗	✗	✗	✓	✓	📄
ASAAsa 275	Spectrum Filaments ↗	1.75	230–260°C	50–80°C	✓	✗	✗	–	94	94	–	42	64	35	–	1.07	✗	✗	✗	✓	✓	📄
ASAAsa Electrically Conductive	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✓	✗	75°C / 6h	–	101	–	46.1	–	3	1.5	1.17	✗	✗	✗	✓	✓	📄
ASAAsa Flameguard 275	Spectrum Filaments ↗	1.75	240–260°C	50–80°C	✓	✗	✗	–	94	94	–	42	64	35	–	1.08	✗	✗	✗	✓	✓	📄
ASAAsa Lw	eSUN ↗	1.75	210–290°C	65–70°C	✓	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAAsa Pro	eSUN ↗	1.75	250–280°C	100–110°C	✓	–	–	–	–	95.5	–	35.7	66.5	18	–	1.06	✗	✗	✗	✓	✓	📄
ASADuraPro ASA	Extrudr ↗	1.75	220–270°C	100–110°C	✓	–	✗	–	96	96	–	62.2	78	20	140	1.05	✗	✗	✗	✓	✓	📄
ASAEasa	eSUN ↗	1.75	240–270°C	90–110°C	✓	–	–	–	–	88	–	50	35	30	–	1	✗	✗	✗	✓	✓	📄
ASAEasy ASA	Print-Me ↗	1.75	210–230°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAHP ASA	Creality ↗	1.75	200–300°C	50–100°C	✓	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASALW-ASA	colorFabb ↗	1.75	240–260°C	90–100°C	✓	–	–	–	–	93	–	11.5	20.7	3.9	1.31	1.07	✗	✗	✗	✓	✓	📄
ASALw Asa Ultrafoam	Spectrum Filaments ↗	1.75	220–285°C	50–80°C	✓	✗	✓	75°C / 6h	–	80	–	39	59	32	–	1.08	✗	✗	✗	✓	✓	📄
ASAMH Build Series ASA	MatterHackers ↗	1.75	240–270°C	90–110°C	✓	✗	✗	–	–	–	–	50	35	–	–	1	✗	✗	✗	✓	✓	📄
ASAMatte ASA	Fiberlogy ↗	1.75	255–270°C	90–110°C	✓	✗	–	80°C / 4h	96	87	–	43	–	19	–	1.07	✗	✗	✗	✓	✓	📄
ASAN-ASA	FILOALFA ↗	1.75	230–250°C	70–90°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASAPerformance ASA	Matter3D ↗	1.75	245–260°C	90–105°C	✓	✗	✗	75°C / 6h	–	110	–	44	–	–	–	–	✗	✗	✗	✓	~	–
ASAPolyLite ASA	Polymaker ↗	1.75	240–260°C	75–95°C	✓	✗	✗	70°C / 6h	105.3	100.2	97.8	–/30XY/Z	60.9	4.4	10.5	1.13	✗	✗	✗	✓	✓	📄
ASAPremium ASA	FormFutura ↗	1.75	275–290°C	90–110°C	✓	✗	✓	70°C / 12h	95	86	–	44	65	33	–	1.08	✗	✗	✗	✓	✓	📄
ASAPremium ASA	Raise3D ↗	1.75	240–260°C	75–95°C	✓	✗	✗	–	105.3	–	97.8	43.8	73.4	6.7	10.3	1.1	✗	✗	✗	✓	✓	📄
ASAPrimaSelect ASA	PrimaCreator ↗	1.75	230–255°C	80–100°C	✓	✗	✗	–	98	–	–	48	–	15	18	1.1	✗	✗	✗	✓	✓	📄
ASAPro ASA	3D-Fuel ↗	1.75	230–260°C	110°C	✓	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	📄
ASAReForm - rApollo	FormFutura ↗	1.75	230–270°C	60–80°C	✓	✗	–	–	–	–	–	–	–	–	–	1.11	✗	✗	✗	✓	~	–
ASASmooth ASA	Print-Me ↗	1.75	220–250°C	80–120°C	✓	✗	✗	70°C / 4h	–	90	–	–	–	–	–	1.07	✗	✗	✗	✓	~	–
ASAThe Filament Asa	Spectrum Filaments ↗	1.75	235–265°C	75–100°C	✓	✗	✗	–	30	86	–	46	63	34	–	1.07	✗	✗	✗	✓	✓	📄
ASAUltrafuse ASA	Forward AM ↗	1.75	260–280°C	100–120°C	✓	✗	✗	60°C / 4h	–	92	112	34.6	59.4	4.5	8.9	1.069	✗	✗	✗	✓	✓	📄
ASA-CFASA CF	3DJAKE ↗	1.75	240–260°C	110°C	✓	✓	–	–	101	93	–	62	93	8	9	1.12	✗	✗	✗	✓	✓	📄
ASA-CFASA CF10	purefil ↗	1.75	210–260°C	80–110°C	✓	✓	–	80°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASA-CFASA KEVLAR	PrintWithSmile ↗	1.75	230–260°C	80–120°C	✓	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
ASA-CFASA-CF	ERYONE ↗	1.75	240–280°C	90–110°C	✓	✓	–	80°C / 4h	–	86	–	39.1/17XY/Z	–	–	–	1.17	✗	✗	✗	✓	✓	📄
ASA-CFASA-CF	Bambu Lab ↗	1.75	250–280°C	80–100°C	✓	✓	–	80°C / 8h	108	–	–	34/30XY/Z	72/33XY/Z	9.6/4.4XY/Z	6.2/9.4XY/Z	1.02	✗	✗	✗	✓	✓	📄
ASA-CFASA-CF20 Core	Qidi Tech ↗	1.75	250–280°C	100–110°C	–	✓	–	65°C / 5h	–	95.8	–	50.06/31.03XY/Z	84.3/–XY/Z	1.64/1.5XY/Z	5.76/–XY/Z	1.06	✗	✗	✗	✓	✓	📄
ASA-CFASA-X FibCR20	CR-3D ↗	1.75	300°C	100°C	✓	✓	✓	70°C / 5h	–	115	–	72	–	1.8	6.2	1.18	✗	✗	✗	✓	✓	📄
ASA-CFAmbrosia ASA-CF	The Virtual Foundry ↗	1.75	250–280°C	100–120°C	✓	✓	–	–	–	88	–	39	80	15.5	10.5	1.09	✗	✗	✗	✓	✓	–
ASA-CFAsa Kevlar	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✓	✗	–	94	94	–	–	–	6	7.5	1.07	✗	✗	✗	–	✓	📄
ASA-CFAsa X Cf10	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✓	✗	–	101.6	101	–	79	–	1.8	13.85	1.1	✗	✗	✗	–	✓	📄
ASA-CFCarbonX ASA+CF	3DXTech ↗	1.75	250°C	110°C	✓	✓	✗	–	–	97	105	48	78	3	–	1.11	✗	✗	✗	✓	✓	📄
ASA-CFDuraPro ASA CF	Extrudr ↗	1.75	240–260°C	110°C	✓	✓	–	–	101	96	–	49	78	–	100	1.14	✗	✗	✗	✓	✓	📄
ASA-CFFiberon ASA-CF08	Polymaker ↗	1.75	260–280°C	90–100°C	✓	✓	✗	90°C / 6h	110.8	97.3	106.6	–/25XY/Z	69.1	1.8	5.5	1.09	✗	✗	✗	✓	✓	📄
ASA-CFThe Filament Asa Cf	Spectrum Filaments ↗	1.75	235–270°C	75–100°C	✓	✓	✗	–	96	88	–	66/59XY/Z	–	2	5.7	1.12	✗	✗	✗	–	✓	📄
ASA-GFASA-GF	ERYONE ↗	1.75	260°C	90–100°C	✓	✓	–	80°C / 4h	–	86	104	34.2/21.2XY/Z	–	–	–	–	✗	✗	✗	✓	✓	📄
ASA-GFAsa X Gf10	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✗	✗	–	98	98	–	55	–	2.8	8.3	1.11	✗	✗	✗	–	✓	📄
ASA-GFDuraPro ASA GF	Extrudr ↗	1.75	230–270°C	110°C	✓	✓	–	–	–	92	–	60	95	5	–	1.18	✗	✗	✗	✓	✓	📄
BVOHBVOH	Fiberlogy ↗	1.75	190–220°C	50–70°C	✗	✗	✓	50°C / 4h	92	–	68	45	71	9	–	1.14	✗	✗	✗	–	✓	📄
BVOHPrimaSelect BVOH	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✓	–	62.9	53.8	–	35	50	21.5	14	1.09	✗	✗	✗	–	✓	📄
BVOHUltrafuse BVOH	Forward AM ↗	1.75	190–210°C	60–100°C	✗	✗	✓	60°C / 16h	–	–	69	33.7	53.8	14.8	–	1.138	✗	✗	✗	✗	✓	📄
COCCOC	CREAMELT ↗	1.75	240–250°C	80–90°C	✗	✗	✗	–	–	75	78	63	–	5	20	1.01	✗	✗	✗	–	✓	📄
COCCOC flex	purefil ↗	1.75	200–280°C	50–100°C	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
COCCOC tough	purefil ↗	1.75	200–280°C	50–100°C	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
CPECPE Antibac	Fiberlogy ↗	1.75	260–280°C	110–120°C	✗	✗	–	60°C / 4h	–	85	–	58	59	185	–	1.18	✗	✗	✗	–	✓	📄
CPECPE HG100	Fillamentum ↗	1.75	255–275°C	70–85°C	✗	✗	✓	60°C / 4h	–	80	90	47	71	150	–	1.25	✗	✗	✗	–	✓	📄
CPECPE HT	Fiberlogy ↗	1.75	260–280°C	110–120°C	✗	✗	–	60°C / 4h	–	85	–	58	59	185	–	1.18	✗	✗	✗	–	✓	📄
CPE-CFCPE CF112 Carbon	Fillamentum ↗	1.75	250–270°C	70–85°C	✗	✓	✗	–	–	–	–	52.4	–	8	–	1.16	✗	✗	✗	–	✓	📄
CeramicCr-SiC	Nanovia ↗	1.75	200–220°C	40–60°C	✗	✗	–	–	–	–	–	–	–	–	–	2.66	✗	✗	✗	–	~	–
Ceramic-B4CRapid 3DShield Boron Carbide Filament	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	–	✓	✗	–	–	–	–	–	–	–	–	1.4	✗	✗	✗	–	~	📄
Ceramic-BasaltBasalt Moon Dust Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	1.675	✗	✗	✗	–	~	📄
Ceramic-PorcelainPorcelain Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	1.45	✗	✗	✗	–	~	📄
Ceramic-SiCSilicon Carbide Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	1.915	✗	✗	✗	–	~	📄
Ceramic-ZirconZirconium Silicate (Zircopax) Ceramic Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	–	✓	✗	–	–	–	–	–	–	–	–	2.145	✗	✗	✗	–	~	📄
Glass-BorosilicatePyrex Borosilicate Glass Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	1.5	✗	✗	✗	–	~	📄
HDPEHdpe	Spectrum Filaments ↗	1.75	260–290°C	80–100°C	✓	✗	✗	–	–	110	–	29	–	18	10	1.1	✗	✗	✗	–	✓	📄
HIPSBreakaway	UltiMaker ↗	2.85	220–230°C	60–65°C	✗	✗	✗	–	–	–	59.7	–	–	–	–	1.22	✗	✗	✗	–	~	📄
HIPSEasyFil HIPS	FormFutura ↗	1.75	230–245°C	80–100°C	✗	✗	✗	–	87	88	–	16	50	–	7	1.05	✗	✗	✗	–	✓	📄
HIPSHIPS	Keene Village Plastics ↗	2.85	230–250°C	110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
HIPSHIPS	Nanovia ↗	1.75	230–250°C	90–110°C	✓	✗	–	–	–	74	100	16/–XY/Z	–	1/–XY/Z	11	1.04	✗	✗	✗	–	✓	–
HIPSHIPS	Keene Village Plastics ↗	1.75	230–250°C	110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
HIPSHIPS	Gembird ↗	1.75	230–250°C	70–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.04	✗	✗	✗	–	~	–
HIPSHIPS	Fillamentum ↗	1.75	230–250°C	90–105°C	✓	✗	✗	–	88.5	85	–	26	40	40	–	1.05	✗	✗	✗	–	✓	📄
HIPSHIPS	3D Fila ↗	1.75	230–250°C	90–100°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
HIPSHIPS	Fiberlogy ↗	1.75	230–245°C	80–100°C	✗	✗	–	60°C / 4h	90	74	–	25	–	31	12	1.04	✗	✗	✗	–	✓	📄
HIPSHIPS	Coex3D ↗	1.75	225–235°C	90–100°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
HIPSHIPS	Push Plastic ↗	2.85	230–250°C	90–110°C	✓	✗	✗	60°C / 4h	–	178	–	25.5	35.3	–	–	–	✗	✗	✗	–	✓	📄
HIPSHIPS	Devil Design ↗	1.75	230–240°C	90–100°C	✓	✗	✗	–	96	–	–	–	–	50	–	1.05	✗	✗	✗	–	✓	📄
HIPSHIPS	FILOALFA ↗	1.75	210–230°C	70–90°C	✗	✗	✗	65°C / 3h	99	85	–	24	38	–	125	1.04	✗	✗	✗	–	✓	📄
HIPSHIPS	Push Plastic ↗	1.75	230–250°C	90–110°C	✓	✗	✗	60°C / 4h	–	81	–	26	35	–	–	1.05	✗	✗	✗	–	✓	📄
HIPSHIPS	Das Filament ↗	1.75	220–240°C	90–110°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
HIPSHIPS 404	Nebula Filaments ↗	2.85	230–250°C	95–105°C	✗	✗	✗	–	100	–	–	–	38	–	–	1.05	✗	✗	✗	–	✓	📄
HIPSHIPS 404	Nebula Filaments ↗	1.75	230–250°C	95–105°C	✗	✗	✗	–	100	–	–	–	38	–	–	1.05	✗	✗	✗	–	✓	📄
HIPSHips	eSUN ↗	1.75	230–270°C	100–115°C	✓	–	–	–	–	–	–	27	39	55	–	1.05	✗	✗	✗	–	✓	📄
HIPSHips X	Spectrum Filaments ↗	1.75	230–260°C	80–100°C	✓	✗	✗	–	87	96	–	16	50	50	7	1.05	✗	✗	✗	–	✓	📄
HIPSPrimaSelect HIPS	PrimaCreator ↗	1.75	220–270°C	90–110°C	✓	✗	✗	–	89	–	–	22	–	50	–	1.04	✗	✗	✗	–	✓	📄
HIPSUltrafuse HiPS	Forward AM ↗	1.75	240–260°C	100–120°C	✓	✗	✗	60°C / 16h	–	86	99	18.4	31.8	1.4	6.5	1.023	✗	✗	✗	–	✓	📄
KARBONOVÁKarbonová vlákna	Filament PM ↗	1.75	230–240°C	110–120°C	✓	✓	–	–	170	165	–	–	1546	–	8.3	1.01	✗	✗	✗	–	✓	–
LCPLCP	purefil ↗	1.75	280–300°C	120–150°C	✓	–	✓	150°C / 6h	218	210	–	150	–	–	–	1.39	✗	✗	✗	–	✓	–
MABSMABS	purefil ↗	1.75	210–260°C	80–110°C	✓	–	–	90°C / 4h	104	97	–	42	–	3	–	1.08	✗	✗	✗	–	✓	–
Metal-Al6061Aluminum 6061 Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	1.35	✗	✗	✗	–	~	📄
Metal-BronzeBronze Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	4.3	✗	✗	✗	–	~	📄
Metal-CuCopper Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	4.75	✗	✗	✗	–	~	📄
Metal-FeHigh Carbon Iron Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	3.375	✗	✗	✗	–	~	📄
Metal-Fe-PurePure Iron Filamet (discontinued)	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	–	✓	✗	–	–	–	–	–	–	–	–	2.81	✗	✗	✗	–	~	📄
Metal-H13H13 Tool Steel Filamet (discontinued)	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	–	✓	✗	–	–	–	–	–	–	–	–	3.56	✗	✗	✗	–	~	📄
Metal-Inconel718Inconel 718 Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	3.9	✗	✗	✗	–	~	📄
Metal-M300M300 Tool Steel Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	3.575	✗	✗	✗	–	~	📄
Metal-SS174Stainless Steel 17-4 Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	3.7	✗	✗	✗	–	~	📄
Metal-SS316LStainless Steel 316L Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	3.5	✗	✗	✗	–	~	📄
Metal-Ti64Titanium 64-23 Filamet	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	2.675	✗	✗	✗	–	~	📄
Metal-Ti64-5Titanium 64-5 Filamet (discontinued)	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	–	✓	✗	–	–	–	–	–	–	–	–	2.46	✗	✗	✗	–	~	📄
Metal-WRapid 3DShield Tungsten Filament	The Virtual Foundry ↗	1.75	190–230°C	40–65°C	–	✓	✗	–	–	–	–	–	–	–	–	8.5	✗	✗	✗	–	~	📄
OBCOBC 905	Fillamentum ↗	1.75	200°C	65°C	✗	✗	✗	–	–	–	-13	14	7.8	700	–	0.905	✗	✗	✗	–	✓	📄
OtherHYMAG'IN FILAMAG-F	Nanovia ↗	1.75	230°C	45°C	✗	✓	–	–	–	–	–	11	–	9.2	–	2.8	✗	✗	✗	–	✓	–
OtherInsublend	Nanovia ↗	1.75	260–280°C	130–150°C	✓	✗	–	–	–	114	140	–	–	20	–	1.08	✗	✗	✗	–	✓	–
PAAddbor N25	add:north ↗	2.85	255–275°C	60–70°C	✓	✗	✓	70°C / 8h	–	–	–	54	66.5	35.5	–	1.3	✗	✗	✗	–	✓	📄
PAAddbor N25	add:north ↗	1.75	255–275°C	60–70°C	✓	✗	✓	70°C / 8h	–	–	–	54	66.5	35.5	–	1.3	✗	✗	✗	–	✓	📄
PAAdura	add:north ↗	1.75	255–265°C	55–65°C	✓	✗	✓	70°C / 8h	–	105	51	50	52	46	–	1.1	✗	✗	✗	–	✓	📄
PAAdura	add:north ↗	2.85	255–265°C	55–65°C	✓	✗	✓	70°C / 8h	–	105	51	50	52	46	–	1.1	✗	✗	✗	–	✓	📄
PAAdura FDA	add:north ↗	2.85	245–270°C	50–65°C	✓	✗	✓	70°C / 8h	–	105	51	50	52	46	–	1.1	✗	✓	✗	–	✓	📄
PAAdura FDA	add:north ↗	1.75	245–270°C	50–65°C	✓	✗	✓	70°C / 8h	–	105	51	50	52	46	–	1.1	✗	✓	✗	–	✓	📄
PACoexNylex Nylon	Coex3D ↗	1.75	245–295°C	85–110°C	✓	✗	✓	85°C / 12h	–	–	–	–	–	–	–	1.08	✗	✗	✗	–	~	–
PAConductive Nylon	Matter3D ↗	1.75	260–285°C	80–100°C	✓	✓	✓	80°C / 12h	–	110	–	100	–	–	–	–	✗	✗	✓	–	~	–
PADuraPro PA12	Extrudr ↗	1.75	260–290°C	110°C	✓	–	–	–	142	–	–	43	–	50	11	1.01	✗	✗	✗	–	✓	📄
PAE-PA	JAYO ↗	1.75	245–260°C	70–90°C	✓	✗	✓	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PAEasy Nylon	Overture3D ↗	1.75	245–260°C	50°C	✗	✗	✓	95°C / 7h	181.2	–	–	–/50.3XY/Z	85	8.4	7.9	1.12	✗	✗	✗	–	✓	📄
PAEpa	eSUN ↗	1.75	250–290°C	70–90°C	✓	–	✓	70°C / 12h	–	50	–	52.45	58	175.32	–	1.12	✗	✗	✗	–	✓	📄
PAEpa12	eSUN ↗	1.75	260–290°C	70–90°C	✓	–	✓	70°C / 12h	–	100	–	50.81	47.27	165.41	–	1.012	✗	✗	✗	–	✓	📄
PAFiberon PA612-ESD	Polymaker ↗	1.75	280–300°C	40–50°C	✓	✗	✓	100°C / 10h	190	125.4	41.8	–/21.5XY/Z	116.2	3	5.9	1.1	✗	✗	✓	–	✓	📄
PAHtPA	Mingda ↗	2.85	280–300°C	70–80°C	✗	✗	✓	90°C / 5h	–	79	–	86	133.35	7.08	5.14	1.21	✗	✗	✗	–	✓	📄
PAHtPA	Mingda ↗	1.75	280–300°C	70–80°C	✗	✗	✓	90°C / 5h	–	79	–	86	133	7	5.14	1.21	✗	✗	✗	–	✓	📄
PAHyper PA6	3DPower ↗	1.75	230–270°C	60–90°C	✓	✗	✓	70°C / 14h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PALUVOCOM 3F PAHT 9825	FormFutura ↗	1.75	270–290°C	50–70°C	✗	✗	✓	130°C / 7h	–	90	–	85	–	3.6	–	1.2	✗	✗	✗	–	✓	📄
PALUVOCOM 3F PAHT 9936	FormFutura ↗	1.75	265–290°C	50–70°C	✗	✓	✓	130°C / 7h	–	90	–	78	–	4.4	–	1.25	✗	✗	✗	–	✓	📄
PALUVOCOM 3F PAHT KK 50056 FR	FormFutura ↗	1.75	270–300°C	90–110°C	✓	✓	✓	80°C / 12h	–	90	–	55	–	1.2	–	1.49	✗	✗	✗	–	✓	📄
PALuvocom 3F PAHT 9825 NT	3D4Makers ↗	1.75	260–285°C	60–80°C	✗	✗	✓	80°C / 8h	–	90	–	85	–	3.6	–	1.2	✗	✗	✗	–	✓	📄
PALuvocom 3F PAHT 9825 NT	3D4Makers ↗	2.85	260–285°C	60–80°C	✗	✗	✓	80°C / 8h	–	90	–	85	–	3.6	–	1.2	✗	✗	✗	–	✓	📄
PALuvocom 3F PAHT 9936 BK	3D4Makers ↗	2.85	250–280°C	70–80°C	✗	✗	✓	80°C / 8h	–	90	–	78	–	4.4	–	1.25	✗	✗	✗	–	✓	📄
PALuvocom 3F PAHT 9936 BK	3D4Makers ↗	1.75	250–280°C	70–80°C	✗	✗	✓	80°C / 8h	–	90	–	78	–	4.4	–	1.25	✗	✗	✗	–	✓	📄
PALuvocom 3F PAHT KK 50056 BK FR	3D4Makers ↗	2.85	265–290°C	80–90°C	✓	✗	✓	80°C / 8h	–	90	–	55	–	1.2	–	1.49	✗	✗	✗	–	✓	📄
PALuvocom 3F PAHT KK 50056 BK FR	3D4Makers ↗	1.75	265–290°C	80–90°C	✓	✗	✓	80°C / 8h	–	90	–	55	–	1.2	–	1.49	✗	✗	✗	–	✓	📄
PAMH Build Series Nylon	MatterHackers ↗	1.75	250–290°C	70–90°C	✓	✗	✓	–	–	–	–	52.45	58	–	–	1.12	✗	✗	✗	–	✓	📄
PANYLON	FILOALFA ↗	1.75	200–240°C	60–80°C	✓	✗	✓	–	–	–	–	–	–	–	–	1.12	✗	✗	✗	–	~	📄
PANylon	Push Plastic ↗	1.75	250–275°C	90–110°C	✗	✗	✓	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PANylon	Push Plastic ↗	2.85	250–275°C	90–110°C	✗	✗	✓	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PANylon	UltiMaker ↗	2.85	250–260°C	80–90°C	✗	✗	✓	–	169.6	89.2	55.1	63.1	82.9	120	13.7	1.14	✗	✗	✗	–	✓	📄
PANylon	Keene Village Plastics ↗	1.75	245–280°C	110–120°C	✓	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PANylon	Tronxy ↗	1.75	240–260°C	70–100°C	✓	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PANylon	Keene Village Plastics ↗	2.85	245–280°C	110–120°C	✓	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PANylon AF80 Aramid	Fillamentum ↗	1.75	235–255°C	90–110°C	✓	✓	✓	–	–	–	–	50.4	–	5.8	53.2	0.99	✗	✗	✗	–	✓	📄
PANylon CoPA	Snapmaker ↗	1.75	250–270°C	25–50°C	✓	✓	✓	70°C / 8h	180	–	67	66.2	97	–	9.6	–	✗	✗	✗	–	✓	–
PANylon ESD	CR-3D ↗	1.75	260°C	110°C	✓	✗	✓	70°C / 4h	–	–	–	35	–	12	80	1.02	✗	✗	✓	–	✓	📄
PANylon FX256	Fillamentum ↗	1.75	235–260°C	80–105°C	✓	✗	✓	–	140	50	–	45	–	50	7	1.01	✗	✗	✗	–	✓	📄
PANylon MAX	Printalot ↗	1.75	220–240°C	80–100°C	✓	✗	✓	75°C / 8h	–	–	–	–	–	–	–	1.12	✗	✗	✗	–	~	–
PANylon MAX	Printalot ↗	2.85	220–240°C	80–100°C	✓	✗	✓	75°C / 8h	–	–	–	–	–	–	–	1.12	✗	✗	✗	–	~	–
PANylon PA12	Fiberlogy ↗	1.75	255–270°C	100°C	✓	✗	✓	70°C / 4h	145	55	–	45	–	50	12	1.01	✗	✗	✗	–	✓	📄
PANylon PA12	Print-Me ↗	1.75	250–280°C	–	✓	✗	✓	70°C / 6h	–	150	–	–	–	–	7.4	1	✗	✗	✗	–	✓	–
PANylon PA6	Azure Film ↗	1.75	260–280°C	90–120°C	✓	✗	✓	80°C / 8h	–	–	–	96	–	350	–	1.13	✗	✗	✗	–	✓	📄
PAOmega Resistant Nylon	BCN3D ↗	1.75	250–270°C	85–100°C	✓	✗	✓	–	–	69	81	56	90	6.1	4.35	1.27	✗	✗	✗	–	✓	📄
PAPA	Kingroon ↗	1.75	250–270°C	80–110°C	✓	✗	✓	80°C / 12h	–	110	–	80	105	30	–	1.14	✗	✗	✗	–	✓	–
PAPA	ERYONE ↗	1.75	230–260°C	50–70°C	✓	✗	✓	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PAPA	colorFabb ↗	1.75	265–290°C	40–50°C	✓	–	✓	–	–	90	120	63	–	8.5	5.2	1.14	✗	✗	✗	–	✓	📄
PAPA	BCN3D ↗	2.85	220–250°C	90–100°C	✓	✗	✓	–	172	65	49	33.2	17.7	143.3	85.4	1.115	✗	✗	✗	–	✓	📄
PAPA (Easy PA)	Sunlu ↗	1.75	250–280°C	70–90°C	✓	✗	✓	80°C / ?h	135	119	65	61/–XY/Z	91	15	11/5.1XY/Z	1.1	✗	✗	✗	–	✓	📄
PAPA 12	CR-3D ↗	1.75	275°C	100°C	✓	✗	✓	70°C / 4h	–	120	–	50	–	5	–	1.01	✗	✗	✗	✓	✓	📄
PAPA 12 flex	CR-3D ↗	1.75	250°C	90°C	✓	✗	✓	70°C / 4h	–	95	–	25	–	–	–	1.02	✓	✗	✗	✓	✓	📄
PAPA Food Industry	Nanovia ↗	1.75	265–290°C	70–80°C	✗	✗	✓	–	–	–	–	83	–	4	–	1.3	✗	✓	✗	–	✓	–
PAPA Rail	Nanovia ↗	1.75	260–280°C	70–80°C	✗	✗	✓	–	–	90	–	27/22XY/Z	–	1.5/1.3XY/Z	–	1.49	✗	✗	✗	–	✓	–
PAPA-6	Nanovia ↗	1.75	240–260°C	80–100°C	✓	✗	✓	–	190	140	–	51	85	50	5	1.14	✗	✗	✗	–	✓	–
PAPA12	purefil ↗	1.75	230–280°C	100–140°C	✓	–	✓	80°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PAPA12	Devil Design ↗	1.75	240–270°C	95–120°C	✓	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PAPA6	C-TECH ↗	1.75	250–270°C	0–75°C	✓	✗	✓	80°C / 12h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PAPAHT	Material4Print ↗	1.75	260–290°C	60–80°C	✓	–	✓	100°C / 10h	–	90	–	85	–	3.6	–	1.2	✗	✗	✗	–	✓	📄
PAPAJet - NYLON	Filament PM ↗	1.75	230–240°C	110–120°C	✓	✗	✓	–	170	165	–	–	1180	–	11	1.01	✗	✗	✗	–	✓	📄
PAPRO Series Nylon	MatterHackers ↗	1.75	240–260°C	65°C	✓	✗	✓	75°C / 8h	–	–	–	36.3	92	34	–	1.14	✗	✗	✗	–	✓	📄
PAPRO Series Nylon	MatterHackers ↗	2.85	240–260°C	65°C	✓	✗	✓	75°C / 8h	–	–	–	36.3	92	34	–	1.14	✗	✗	✗	–	✓	📄
PAPa6 Gk10	Spectrum Filaments ↗	1.75	260–290°C	80–100°C	✓	✓	✓	80°C / 12h	–	–	–	87	–	2.7	26	1.01	✗	✗	✗	–	✓	📄
PAPa6 Low Wrap	Spectrum Filaments ↗	1.75	240–280°C	60–80°C	✓	✗	✓	60°C / 12h	–	60	–	50	112	1.9	6.8	1.15	✗	✗	✗	–	✓	📄
PAPa6 Neat Black	Spectrum Filaments ↗	1.75	250–280°C	70–100°C	✓	✗	✓	80°C / 12h	–	–	–	78	–	4.4	90	1.25	✗	✗	✗	–	✓	📄
PAPa6 Neat Natural	Spectrum Filaments ↗	1.75	250–280°C	70–100°C	✓	✗	✓	80°C / 12h	–	–	–	80	–	4	135	1.14	✗	✗	✗	–	✓	📄
PAPerformance Nylon	Matter3D ↗	1.75	260–285°C	70–100°C	✓	✗	✓	70°C / 8h	–	92.5	–	82.5	–	–	–	–	✗	✗	✗	–	~	–
PAPolyMide CoPA	Polymaker ↗	1.75	250–270°C	25–50°C	✓	✗	✓	80°C / 48h	180	69.8	67	–/43.3XY/Z	97	9.9	9.6	1.12	✗	✗	✗	–	✓	📄
PAPolySupport for PA12	Polymaker ↗	1.75	270–300°C	50–80°C	✓	✗	✓	100°C / 8h	171	53	–	–	–	–	–	1.29	✗	✗	✗	–	✓	📄
PAS-HtPA	Mingda ↗	1.75	270–280°C	60–80°C	✗	✓	✓	80°C / 4h	–	–	–	–	–	–	–	1.26	✗	✗	✗	–	~	📄
PAS-HtPA	Mingda ↗	2.85	270–280°C	60–80°C	✗	✓	✓	80°C / 4h	–	–	–	–	–	–	–	1.26	✗	✗	✗	–	~	📄
PAS-Multi	Mingda ↗	1.75	260–280°C	60–80°C	✗	✓	✓	80°C / 4h	–	–	–	–	–	–	–	1.16	✗	✗	✗	–	~	📄
PAS-Multi	Mingda ↗	2.85	260–280°C	60–80°C	✗	✓	✓	80°C / 4h	–	–	–	–	–	–	–	1.16	✗	✗	✗	–	~	📄
PASTYX PA6	FormFutura ↗	1.75	255–285°C	90–110°C	✓	✗	✓	–	–	60	–	50	112	1.9	6.8	1.15	✗	✗	✗	–	✓	📄
PAThermatech Pa	Spectrum Filaments ↗	1.75	250–280°C	60–90°C	✓	✗	✓	85°C / 6h	–	–	–	55/50XY/Z	–	2.7/3.4XY/Z	3.8	1.3	✗	✗	✗	–	✓	📄
PAUltraPA	Qidi Tech ↗	1.75	260–280°C	70–80°C	–	✓	✓	90°C / 5h	–	72.5	–	69.29/50.03XY/Z	112.64/–XY/Z	9.77/–XY/Z	9.74/–XY/Z	1.21	✗	✗	✗	–	✓	📄
PAUltrafuse PA	Forward AM ↗	1.75	220–250°C	90–120°C	✓	✗	✓	80°C / 40h	160	113	49	61.4	–	9.6	5.6	1.115	✗	✗	✗	–	✓	📄
PAiglidur A350	igus ↗	1.75	340–370°C	90–140°C	✓	✓	✓	100°C / 12h	–	–	–	–	50/46XY/Z	–	–	1.42	✗	✓	✗	–	~	📄
PAiglidur I150	igus ↗	1.75	225–240°C	65–75°C	✗	✓	✓	60°C / 4h	–	–	–	–	–	–	–	–	✗	✓	✗	–	~	📄
PAiglidur I151	igus ↗	1.75	–	–	–	–	–	–	–	–	–	–	–	–	–	–	✗	✓	✗	–	!	–
PAiglidur I180	igus ↗	2.85	250–260°C	80–100°C	✗	✓	✓	60°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PAiglidur I190	igus ↗	1.75	265–280°C	70–80°C	✗	✓	✓	70°C / 24h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PAiglidur J260	igus ↗	1.75	260–280°C	100–130°C	✓	✓	✓	70°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PAiglidur RW370	igus ↗	1.75	350–360°C	–	✓	–	✓	–	–	–	–	–	91	–	–	–	✗	✗	✗	–	~	–
PArPA12	Filamentive ↗	1.75	265°C	105–110°C	✓	✗	✓	55°C / 2h	–	–	–	46	–	14.9	–	–	✗	✗	✗	–	~	📄
PA-CFAdura X	add:north ↗	1.75	260–270°C	70–80°C	✓	✓	✓	70°C / 8h	–	145	51	58	81	–	–	1.2	✗	✗	✗	–	✓	📄
PA-CFAdura X	add:north ↗	2.85	260–270°C	70–80°C	✓	✓	✓	70°C / 8h	–	145	51	58	81	–	–	1.2	✗	✗	✗	–	✓	📄
PA-CFCarbon Fiber Nylon	Push Plastic ↗	1.75	240–260°C	90–100°C	✗	✓	✓	75°C / 2h	–	172	–	44	54	17	–	1.1	✗	✗	✗	–	✓	📄
PA-CFCarbon Fiber Nylon	Push Plastic ↗	2.85	240–260°C	90–100°C	✗	✓	✓	75°C / 2h	–	172	–	44	–	–	–	1.1	✗	✗	✗	–	✓	📄
PA-CFCarbon Fiber Nylon PA12	Print-Me ↗	1.75	250–280°C	–	✓	✓	✓	70°C / 6h	–	150	–	–	–	–	7.4	1	✗	✗	✗	–	✓	–
PA-CFCarbonX PA6+CF	3DXTech ↗	1.75	240–270°C	80–110°C	✓	✓	✓	–	–	147	70	63	84	3	–	1.17	✗	✗	✗	–	✓	📄
PA-CFCoexNylex PA6-CF	Coex3D ↗	1.75	265–290°C	80–100°C	✓	✓	✓	85°C / 12h	–	–	–	–	–	–	–	1.24	✗	✗	✗	–	~	–
PA-CFDuraPro PA12 CF	Extrudr ↗	1.75	260–290°C	110°C	✓	✓	–	–	145	–	–	60.4	–	35	9	1.03	✗	✗	✗	–	✓	📄
PA-CFDuraPro PA6 CF	Extrudr ↗	1.75	270–300°C	80–100°C	✓	✓	–	–	–	–	–	–	–	4	16	1.15	✗	✗	✗	–	✓	📄
PA-CFEpa Cf	eSUN ↗	1.75	260–300°C	45–80°C	✓	✓	✓	70°C / 12h	–	155	–	140	140	10.61	–	1.24	✗	✗	✗	–	✓	📄
PA-CFEpa12 Cf	eSUN ↗	1.75	270–300°C	45–80°C	✓	✓	✓	70°C / 12h	–	94.1	–	108.18	116.58	9.02	–	1.24	✗	✗	✗	–	✓	📄
PA-CFEpa12cf	eSUN ↗	1.75	250–290°C	60–100°C	✓	✓	✓	–	–	131.9	–	–/38.2XY/Z	64.1/–XY/Z	–/18.2XY/Z	7/–XY/Z	1.07	✗	✗	✗	–	✓	📄
PA-CFHP PPA-CF	Creality ↗	1.75	280–300°C	–	✓	✓	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFHtPA-CF	Mingda ↗	1.75	300–320°C	70–90°C	✓	✓	✓	80°C / 4h	–	117	–	102.59	153.18	1.66	6.36	1.15	✗	✗	✗	–	✓	📄
PA-CFHtPA-CF	Mingda ↗	2.85	300–320°C	70–90°C	✓	✓	✓	80°C / 4h	–	117	–	102.59	153.18	1.66	6.36	1.15	✗	✗	✗	–	✓	📄
PA-CFHtPA-CF25	Mingda ↗	1.75	300–340°C	70–80°C	✓	✓	✓	90°C / 5h	–	96	–	109.68	176.24	2.18	12.04	1.23	✗	✗	✗	–	✓	📄
PA-CFHyper PA6-CF15	3DPower ↗	1.75	250–280°C	60–90°C	✓	✓	✓	80°C / 14h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFIndustrial PPA-CF	Raise3D ↗	1.75	280–310°C	80–100°C	✗	✓	✓	80°C / 6h	–	188	–	122	190	1.9	7.8	1.15	✗	✗	✗	–	✓	📄
PA-CFLUVOCOM 3F PAHT CF 9742	FormFutura ↗	1.75	265–290°C	50–80°C	✓	✓	✓	130°C / 8h	–	200	–	170	–	1	–	1.25	✗	✗	✗	–	✓	📄
PA-CFLUVOCOM 3F PAHT CF 9891	FormFutura ↗	1.75	265–290°C	50–80°C	✗	✓	✓	130°C / 7h	–	90	–	120	–	2	–	1.24	✗	✗	✗	–	✓	📄
PA-CFLuvocom 3F PAHT CF 9742 BK	3D4Makers ↗	1.75	260–290°C	60–80°C	✗	✓	✓	80°C / 8h	–	–	–	–	–	–	–	1.25	✗	✗	✗	–	~	📄
PA-CFLuvocom 3F PAHT CF 9742 BK	3D4Makers ↗	2.85	260–290°C	60–80°C	✗	✓	✓	80°C / 8h	–	–	–	–	–	–	–	1.25	✗	✗	✗	–	~	📄
PA-CFLuvocom 3F PAHT CF 9891 BK	3D4Makers ↗	1.75	260–290°C	60–80°C	✗	✓	✓	80°C / 8h	–	90	–	130	–	2	35	1.24	✗	✗	✗	–	✓	📄
PA-CFLuvocom 3F PAHT CF 9891 BK	3D4Makers ↗	2.85	260–290°C	60–80°C	✗	✓	✓	80°C / 8h	–	90	–	130	–	2	35	1.24	✗	✗	✗	–	✓	📄
PA-CFMH Build Series Nylon CF	MatterHackers ↗	1.75	260–300°C	45–60°C	✓	✓	✓	–	–	–	–	140	140	–	–	1.24	✗	✗	✗	–	✓	📄
PA-CFNylon CF	UltiMaker ↗	2.85	250–265°C	80–90°C	✗	✓	✓	–	–	135.4	–	52.12	70.36	4.67	24	1.03	✗	✗	✗	–	✓	📄
PA-CFNylon CF	Matter3D ↗	1.75	260–285°C	70–100°C	✓	✓	✓	70°C / 8h	–	135	–	125	–	–	–	–	✗	✗	✗	–	~	–
PA-CFNylon CF15 Carbon	Fillamentum ↗	1.75	235–260°C	80–105°C	✓	✓	✓	–	–	–	–	54.5	–	103	86.2	1.08	✗	✗	✗	–	✓	📄
PA-CFNylon PA12 CF	Fiberlogy ↗	1.75	255–270°C	90–110°C	✗	✓	✓	80°C / 4h	–	150	–	120	–	5	–	1.07	✗	✗	✗	–	✓	📄
PA-CFNylon PA12-CF1	Nebula Filaments ↗	1.75	250–290°C	90–120°C	✓	✓	✓	80°C / 8h	–	160	–	100	–	5	10	1.07	✗	✗	✗	–	✓	📄
PA-CFNylon PA12-CF1	Nebula Filaments ↗	2.85	250–290°C	90–120°C	✓	✓	✓	80°C / 8h	–	160	–	100	–	5	10	1.07	✗	✗	✗	–	✓	📄
PA-CFNylon X CF	Print-Me ↗	1.75	250–280°C	40–80°C	✗	✓	✓	70°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFOmega Tooling CF	BCN3D ↗	1.75	260–280°C	90–105°C	✓	✓	✓	–	–	69	81	56	90	6.1	4.35	1.27	✗	✗	✗	–	✓	📄
PA-CFPA CF Lo-Warp	colorFabb ↗	1.75	260–280°C	20–50°C	✓	✓	✓	–	–	–	120	–	–	–	–	1.4	✗	✗	✗	–	~	📄
PA-CFPA-6 CF	Nanovia ↗	1.75	240–260°C	80–100°C	✓	✓	✓	–	190	140	–	77/36XY/Z	–	3.2/4.5XY/Z	–	1.21	✗	✗	✗	–	✓	–
PA-CFPA-CF	Kingroon ↗	1.75	260–290°C	80–110°C	✓	✓	✓	80°C / 12h	–	153	–	120	165	2	–	1.24	✗	✗	✗	–	✓	–
PA-CFPA-CF Nuclear Nylon v3	Atomic Filament ↗	1.75	265–285°C	60°C	✗	✓	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PA-CFPA-CFJet	Filament PM ↗	1.75	230–240°C	110–120°C	✓	✓	✓	–	170	165	–	–	–	–	8.3	1.01	✗	✗	✗	–	✓	–
PA-CFPA11 Carbon Fiber	Prusament ↗	1.75	280–290°C	100–120°C	✓	✓	✓	–	–	152	–	42/49XY/Z	63/103XY/Z	3.3/2.6XY/Z	12/17XY/Z	1.11	✗	✗	✗	–	✓	📄
PA-CFPA12 CF15	CR-3D ↗	1.75	260°C	90°C	✓	✓	✓	70°C / 5h	–	150	–	105	–	5	14.45	1.08	✗	✗	✗	–	✓	📄
PA-CFPA12 CF15	purefil ↗	1.75	230–280°C	100–140°C	✓	✓	✓	80°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFPA12 CF15%	Filament Unger ↗	1.75	260–290°C	70–110°C	✓	✓	✓	70°C / 6h	–	170	–	125	–	–	75	1.07	✗	✗	✗	–	✓	📄
PA-CFPA12-CF	Mingda ↗	2.85	280–300°C	40–70°C	✗	✓	✓	80°C / 8h	–	102	–	65.63	103.13	3.33	9.58	1.06	✗	✗	✗	–	✓	📄
PA-CFPA12-CF	Mingda ↗	1.75	280–300°C	40–70°C	✗	✓	✓	80°C / 8h	–	102	–	65.63	103.13	3.33	9.58	1.06	✗	✗	✗	–	✓	📄
PA-CFPA12-CF	JAYO ↗	1.75	270–280°C	50–70°C	✓	✓	✓	–	–	176	–	100/–XY/Z	173/–XY/Z	–	13/–XY/Z	–	✗	✗	✗	–	✓	–
PA-CFPA12-CF	ERYONE ↗	1.75	260–290°C	80–100°C	✓	✓	–	80°C / 12h	–	185	–	58/14XY/Z	–	–	–	1.06	✗	✗	✗	–	✓	📄
PA-CFPA12-CF	Qidi Tech ↗	1.75	280–300°C	40–70°C	–	✓	✓	90°C / 5h	–	99.6	–	83.34/38.61XY/Z	124.07/–XY/Z	3.16/1.63XY/Z	7.2/–XY/Z	1.09	✗	✗	✗	–	✓	📄
PA-CFPA12-CF	Sunlu ↗	1.75	260–290°C	60–80°C	✓	✓	✓	80°C / ?h	–	175	99	86/–XY/Z	160	13.7	11.3/4.8XY/Z	1.08	✗	✗	✗	–	✓	📄
PA-CFPA12-CF15	PrintWithSmile ↗	1.75	250–270°C	90–100°C	✓	✓	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PA-CFPA6 Carbon C4	CR-3D ↗	1.75	250°C	90°C	✓	✓	✓	70°C / 5h	–	190	–	90	–	8	12	1.19	✗	✗	✗	–	✓	📄
PA-CFPA6-CF	JAYO ↗	1.75	270–280°C	50–70°C	✓	✓	✓	–	–	209	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFPA6-CF	ERYONE ↗	1.75	260–290°C	80–100°C	✓	✓	–	80°C / 12h	–	185	–	53/47XY/Z	–	–	–	1.09	✗	✗	✗	–	✓	📄
PA-CFPA6-CF	Sunlu ↗	1.75	270–290°C	50–70°C	✓	✓	✓	80°C / ?h	–	203	65	112/–XY/Z	192	12	6.5/3.6XY/Z	1.12	✗	✗	✗	–	✓	📄
PA-CFPA6-CF	Bambu Lab ↗	1.75	260–290°C	80–100°C	✓	✓	✓	80°C / 10h	212	–	68	102/48XY/Z	151/80XY/Z	5.8/3.7XY/Z	13.4/15.5XY/Z	1.09	✗	✗	✗	–	✓	📄
PA-CFPAHT CF15	BCN3D ↗	2.85	260–280°C	90–100°C	✓	✓	✓	–	–	145	70	62.9	125.1	2.9	5.1	1.232	✗	✗	✗	–	✓	📄
PA-CFPAHT-CF	Elegoo ↗	1.75	260–290°C	90–110°C	✓	✓	✓	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFPAHT-CF	Material4Print ↗	1.75	270–290°C	80–100°C	✓	✓	✓	100°C / 10h	–	90	–	120	–	2	35	1.24	✗	✗	✗	–	✓	📄
PA-CFPAHT-CF	Qidi Tech ↗	1.75	300–320°C	70–90°C	–	✓	✓	90°C / 5h	–	117.5	–	95.53/51.03XY/Z	141.82/–XY/Z	1.52/1.56XY/Z	5.62/–XY/Z	1.2	✗	✗	✗	–	✓	📄
PA-CFPAHT-CF	Azure Film ↗	1.75	270–290°C	90–120°C	✓	✓	✓	–	–	90	–	130	–	2	35	1.24	✗	✗	✗	–	✓	📄
PA-CFPAHT-CF	Bambu Lab ↗	1.75	260–290°C	80–100°C	✓	✓	✓	80°C / 10h	220	–	70	92/47XY/Z	125/61XY/Z	8.4/4.1XY/Z	22.8/13.3XY/Z	1.06	✗	✗	✗	–	✓	📄
PA-CFPRO Series Nylon CF	MatterHackers ↗	1.75	240–260°C	70°C	✓	✓	✓	–	–	167	–	66.4	85.5	8.1	–	1.01	✗	✗	✗	–	✓	📄
PA-CFPa12 Cf15	Spectrum Filaments ↗	1.75	255–290°C	80–100°C	✓	✓	✓	80°C / 6h	–	150	–	125	–	5	15	1.07	✗	✗	✗	–	✓	📄
PA-CFPa6 Cf	eSUN ↗	1.75	240–260°C	–	✓	✓	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-CFPa6 Cf15	Spectrum Filaments ↗	1.75	260–290°C	80–100°C	✓	✓	✓	80°C / 12h	–	–	–	170	–	2	47	1.25	✗	✗	✗	–	✓	📄
PA-CFPa6 Cs20 Fr V0	Spectrum Filaments ↗	1.75	260–290°C	80–100°C	✓	✓	✓	80°C / 12h	–	–	–	55	–	1.2	–	1.49	✗	✗	✗	–	✓	📄
PA-CFPa6 Low Warp Cf15s	Spectrum Filaments ↗	1.75	250–280°C	70–100°C	✓	✓	✓	80°C / 12h	–	–	–	6	180	4	4	1.18	✗	✗	✗	–	✓	📄
PA-CFPolyMide PA12-CF	Polymaker ↗	1.75	260–300°C	25–50°C	✓	✓	✓	80°C / 48h	–	105	54	–/43.3XY/Z	109.9	3.57	12.5	1.06	✗	✗	✗	–	✓	📄
PA-CFPolyMide PA6-CF	Polymaker ↗	1.75	280–300°C	25–50°C	✓	✓	✓	80°C / 48h	–	173	74.2	–/67.7XY/Z	169	3	13.34	1.17	✗	✗	✗	–	✓	📄
PA-CFPolyMide PA612-CF	Polymaker ↗	1.75	250–300°C	25–50°C	✓	✓	✓	80°C / 48h	–	175	–	–/29.9XY/Z	125.1	2.8	6.8	1.03	✗	✗	✗	–	✓	📄
PA-CFPrimaSelect NylonPower Carbon Fiber	PrimaCreator ↗	1.75	250–265°C	60–70°C	✓	✓	✓	–	–	155	–	66.3	117.9	6.7	–	1	✗	✗	✗	–	✓	📄
PA-CFSTYX PA6-CF15	FormFutura ↗	1.75	255–295°C	90–110°C	✗	✓	✓	–	–	65	–	120	180	4	4	1.18	✗	✗	✗	–	✓	📄
PA-CFUltraPA-CF25	Qidi Tech ↗	1.75	300–340°C	70–80°C	–	✓	✓	90°C / 5h	–	124.2	–	118.19/–XY/Z	184.19/–XY/Z	1.62/–XY/Z	7.29/–XY/Z	1.23	✗	✗	✗	–	✓	📄
PA-CFUltrafuse PAHT CF15	Forward AM ↗	1.75	260–280°C	100–120°C	✓	✓	✓	80°C / 4h	205	145	70	103.2	160.7	1.8	4.8	1.203	✗	✗	✗	–	✓	📄
PA-CFigumid P150	igus ↗	1.75	250–270°C	50–70°C	✓	✓	✓	100°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PA-CFigumid P190	igus ↗	1.75	–	–	–	✓	–	–	–	–	–	–	237	–	–	1.25	✗	✗	✗	–	!	–
PA-GFDuraPro PA6 GF	Extrudr ↗	1.75	270–300°C	80–100°C	✓	✓	–	–	–	–	–	–	–	3.8	18	1.21	✗	✗	✗	–	✓	📄
PA-GFFibreX PA12+GF30	3DXTech ↗	1.75	285°C	110°C	✓	✓	✓	–	–	150	158	82	94	4.5	–	1.23	✗	✗	✗	–	✓	📄
PA-GFHtPA-GF	Mingda ↗	2.85	300–320°C	70–90°C	✓	✓	✓	80°C / 4h	–	101	–	83.45	125.06	2.08	6.24	1.26	✗	✗	✗	–	✓	📄
PA-GFHtPA-GF	Mingda ↗	1.75	300–320°C	70–90°C	✗	✓	✓	90°C / 6h	–	101	–	83.45	125.06	2.08	6.24	1.26	✗	✗	✗	–	✓	📄
PA-GFHtPA-GF25	Mingda ↗	1.75	300–340°C	70–80°C	✓	✓	✓	90°C / 5h	–	79.2	–	96.82	161.99	2.92	12.55	1.29	✗	✗	✗	–	✓	📄
PA-GFNylon PA12 GF	Fiberlogy ↗	1.75	255–270°C	90–110°C	✗	✓	✓	80°C / 4h	–	165	–	72	–	8	16	1.13	✗	✗	✗	–	✓	📄
PA-GFPA-GFJet	Filament PM ↗	1.75	270–290°C	110–120°C	✓	✓	–	–	170	165	–	–	–	–	–	1.01	✗	✗	✗	–	✓	–
PA-GFPA6 GF10	purefil ↗	1.75	240–280°C	100–140°C	✓	✓	✓	80°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-GFPA6 Glass G4	CR-3D ↗	1.75	250°C	90°C	✓	✓	✓	70°C / 5h	–	190	–	140	–	3.2	12	1.27	✗	✗	✗	–	✓	📄
PA-GFPA6-GF	Sunlu ↗	1.75	250–280°C	50–80°C	✓	✓	✓	110°C / ?h	–	205	65	120/–XY/Z	183	16	7.7/5XY/Z	1.269	✗	✗	✗	–	✓	📄
PA-GFPA6-GF	JAYO ↗	1.75	270–290°C	50–70°C	✓	✓	✓	–	–	214	–	–	–	–	–	–	✗	✗	✗	–	~	–
PA-GFPA6-GF	Bambu Lab ↗	1.75	260–290°C	80–100°C	✓	✓	✓	80°C / 10h	210	158	67	75/27XY/Z	120/51XY/Z	3.9/2.3XY/Z	7.2/4.1XY/Z	1.14	✗	✗	✗	–	✓	📄
PA-GFPAHT-GF	Qidi Tech ↗	1.75	300–320°C	70–90°C	–	✓	✓	90°C / 5h	–	109.4	–	90.5/59.58XY/Z	140.77/–XY/Z	2.28/1.78XY/Z	5.84/–XY/Z	1.27	✗	✗	✗	–	✓	📄
PA-GFPa6 Low Warp Gf30	Spectrum Filaments ↗	1.75	250–280°C	70–100°C	✓	✓	✓	80°C / 12h	–	65	–	80	125	3	4	1.34	✗	✗	✗	–	✓	📄
PA-GFPolyMide PA6-GF	Polymaker ↗	1.75	280–300°C	25–50°C	✓	✓	✓	80°C / 48h	–	157	70.4	–/61.4XY/Z	136.4	3.4	16.5	1.2	✗	✗	✗	–	✓	📄
PA-GFPrimaSelect NylonPower Glass Fiber	PrimaCreator ↗	1.75	250–265°C	60–70°C	✓	✓	✓	–	–	160	–	64.7	125	9.2	–	1.07	✗	✗	✗	–	✓	📄
PA-GFSTYX PA6-GF30	FormFutura ↗	1.75	255–295°C	90–110°C	✗	✓	✓	–	–	65	–	80	125	3.5	4	1.34	✗	✗	✗	–	✓	📄
PAHT-CFEpaht Cf	eSUN ↗	1.75	260–300°C	45–80°C	✓	✓	✓	70°C / 12h	–	190	–	173.37	171.64	8.93	–	1.4	✗	✗	✗	–	✓	📄
PBTPBT	purefil ↗	1.75	240–260°C	160–200°C	✓	–	✓	120°C / 4h	175	180	–	–	–	8	4	1.31	✗	✗	✗	–	✓	–
PC3DXMAX PC	3DXTech ↗	1.75	275–295°C	110–120°C	✓	✗	✓	–	–	135	147	62	78	7	–	1.2	✗	✗	✗	–	✓	📄
PCALFALOY 31	FILOALFA ↗	1.75	260–290°C	80–90°C	✓	✓	✓	–	115	100	–	40	75	35	55	1.2	✗	✗	✗	–	✓	📄
PCALFALOY 32	FILOALFA ↗	1.75	260–290°C	80–90°C	✓	✓	✓	90°C / 6h	160	115	–	57	100	–	8	–	✗	✗	✗	–	✓	📄
PCALFALOY 35	FILOALFA ↗	1.75	260–290°C	85–100°C	✓	✓	✓	90°C / 4h	140	118	–	79	119	–	10	1.223	✗	✗	✗	–	✓	📄
PCDuraPro PC FR V0	Extrudr ↗	1.75	260–290°C	110°C	✓	–	–	–	115	–	–	–	–	50	–	1.19	✗	✗	✗	–	✓	📄
PCDuraPro PC PBT	Extrudr ↗	1.75	260–290°C	110°C	✓	–	–	–	126	–	–	–	80	50	60	1.2	✗	✗	✗	–	✓	📄
PCEpc	eSUN ↗	1.75	240–270°C	80–120°C	✓	–	✓	70°C / 6h	–	80	–	54.88	63.41	150.24	–	1.12	✗	✗	✗	–	✓	📄
PCHyper PC	Creality ↗	1.75	240–260°C	50–80°C	✓	–	✓	–	–	–	–	53.44	81.29	4.53	–	1.19	✗	✗	✗	–	✓	–
PCKratos PC	FormFutura ↗	1.75	290–320°C	100–130°C	✓	✗	✓	75°C / 24h	150	139	–	61.8	90.2	100	–	1.2	✗	✗	✗	–	✓	📄
PCPC	Sunlu ↗	1.75	270–300°C	90–110°C	✓	✗	✓	80°C / ?h	–	101	–	50/–XY/Z	77	25	35/75XY/Z	1.15	✗	✗	✗	–	✓	📄
PCPC	Bambu Lab ↗	1.75	260–280°C	90–110°C	✓	✗	✓	80°C / 8h	119	117	145	55/34XY/Z	108/55XY/Z	3.8/2.1XY/Z	7.5/9XY/Z	1.2	✗	✗	✗	–	✓	📄
PCPC	Anycubic ↗	1.75	270–290°C	100–120°C	✓	✗	✓	80°C / 8h	122	110	–	65	105	9	30	1.2	✗	✗	✗	–	✓	📄
PCPC	Elegoo ↗	1.75	260–290°C	90–110°C	✓	✗	✓	80°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCPC	Keene Village Plastics ↗	2.85	265–300°C	110–120°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PCPC	Keene Village Plastics ↗	1.75	265–300°C	110–120°C	✓	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PCPC	UltiMaker ↗	2.85	255–265°C	80°C	✓	✗	✓	–	114.7	104.5	107.7	43.2	89.4	9.2	11.6	1.19	✗	✗	✗	–	✓	📄
PCPC	purefil ↗	1.75	290–320°C	120–150°C	✓	–	✓	120°C / 4h	155	141	–	64	–	4	–	–	✗	✗	✗	–	✓	–
PCPC Blend	Prusament ↗	1.75	265–285°C	100–120°C	✓	✗	✓	113°C / ?h	–	93	–	63/63XY/Z	88/94XY/Z	5.8/5.8XY/Z	12/12XY/Z	1.22	✗	✗	✗	–	✓	📄
PCPC ESD	eSUN ↗	1.75	270–290°C	100°C	✓	✗	✓	–	–	105	–	68	–	5.6	5.1	1.22	✗	✗	✓	–	✓	–
PCPC FR	Bambu Lab ↗	1.75	260–280°C	90–110°C	✓	✗	✓	80°C / 8h	114	–	145	60/21XY/Z	90/47XY/Z	2.4/1.5XY/Z	8.4/8XY/Z	1.18	✗	✗	✗	–	✓	📄
PCPC Professional	Overture3D ↗	1.75	250–270°C	90–105°C	✓	✗	✓	75°C / 7h	115.3	–	–	–/44.5XY/Z	93.4	6.7	5.7	1.21	✗	✗	✗	–	✓	📄
PCPC Space Grade	Prusament ↗	1.75	280–300°C	110–130°C	✓	✓	✓	–	–	137.6	–	72	89	3.8	–	1.21	✗	✗	✓	–	✓	📄
PCPC V0	Nanovia ↗	1.75	270–290°C	100–140°C	✓	✗	✓	–	–	144	–	53	–	4.1	–	1.2	✗	✗	✗	–	✓	–
PCPC+PBT	Push Plastic ↗	2.85	270–290°C	100–120°C	✓	✗	✗	100°C / 4h	–	90	–	53	–	–	–	1.2	✗	✗	✗	–	✓	📄
PCPC+PBT	Push Plastic ↗	1.75	270–290°C	100–120°C	✓	✗	✗	100°C / 4h	–	90	–	53	83	150	–	1.2	✗	✗	✗	–	✓	📄
PCPC-ABS	Sunlu ↗	1.75	260–290°C	90–110°C	✓	✗	✓	80°C / ?h	–	102	106	38/–XY/Z	70	8	15/–XY/Z	1.081	✗	✗	✗	–	✓	📄
PCPC-ABS	CR-3D ↗	1.75	280°C	110°C	✓	✗	✓	–	–	122	–	54	–	50	45	1.13	✗	✗	✗	✓	✓	📄
PCPC-PBT	Polymaker ↗	1.75	260–280°C	100–115°C	✓	✗	✓	90°C / 2h	139	90.8	140	–/28.6XY/Z	66.4	4.6	21.4	1.2	✗	✗	✗	–	✓	📄
PCPC-PTFE	Nanovia ↗	1.75	270–290°C	110–130°C	✓	✗	✓	–	–	–	–	38	–	4.4	12	1.26	✗	✗	✗	–	✓	–
PCPC/ABS	Push Plastic ↗	1.75	270–290°C	110–120°C	✓	✗	✗	110°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCPC/ABS	FILOALFA ↗	1.75	240–260°C	80–110°C	✓	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCPC/ABS	Azure Film ↗	1.75	260–280°C	100–110°C	✓	✗	✓	–	–	120	–	41.4	65.7	–	25	1.04	✗	✗	✗	–	✓	📄
PCPc 275	Spectrum Filaments ↗	1.75	270–320°C	90–130°C	✓	✗	✓	120°C / 5h	275	150	275	61.8	90.2	100	70	1.2	✗	✗	✗	–	✓	📄
PCPc Ht	eSUN ↗	1.75	280–310°C	100–110°C	✓	–	✓	100°C / 6h	–	–	–	67.6/50.6XY/Z	97.2/76.3XY/Z	7.3/4.9XY/Z	13.6/2.4XY/Z	1.23	✗	✗	✗	–	✓	📄
PCPc Ptfe	Spectrum Filaments ↗	1.75	270–320°C	90–130°C	✓	✗	✓	–	94	145	–	55	–	8	12	1.32	✗	✗	✗	–	✓	📄
PCPolyLite PC	Polymaker ↗	1.75	250–270°C	90–105°C	✓	✗	✓	90°C / 2h	119.5	106.6	113.4	–/52.8XY/Z	106.1	4.8	4.1	1.19	✗	✗	✗	–	✓	📄
PCPolyMax PC	Polymaker ↗	1.75	250–270°C	90–105°C	✓	✗	✓	90°C / 2h	116.9	114.1	113	–/41.43XY/Z	81.29	4.53	21.28	1.19	✗	✗	✗	–	✓	📄
PCPolyMax PC-FR	Polymaker ↗	1.75	250–270°C	90–105°C	✓	✗	✓	75°C / 6h	116	107	115	–/46XY/Z	96.6	3.49	11.7	1.2	✗	✗	✗	–	✓	📄
PCPremium PC	Raise3D ↗	1.75	250–270°C	90–105°C	✓	✗	✓	100°C / 2h	119	107	113	63	100	3.2	3.4	1.195	✗	✗	✗	–	✓	📄
PCPrimaSelect PC	PrimaCreator ↗	1.75	250–270°C	80–100°C	✓	✗	✓	–	116	107	–	70	91.5	13.5	37.5	1.2	✗	✗	✗	✗	✓	📄
PC-ABSAmbrosia PC-ABS	The Virtual Foundry ↗	1.75	250–280°C	100–115°C	✓	–	✓	–	–	123	–	43.5	71.5	24	43.5	1.14	✗	✗	✗	–	✓	–
PC-ABSPC-ABS	Polymaker ↗	1.75	250–270°C	90–105°C	✓	✗	✗	75°C / 6h	135	106.4	109	–/22.9XY/Z	66.3	4.2	25.8	1.1	✗	✗	✗	–	✓	📄
PC-ABSPC-ABS	purefil ↗	1.75	255–280°C	100–120°C	✓	–	✓	100°C / 4h	112	91	–	63	–	–	–	–	✗	✗	✗	–	✓	–
PC-ABSPC-ABS UL94 V-0	CR-3D ↗	1.75	280°C	110°C	✓	✗	✓	–	–	117	–	60	–	50	43	1.2	✗	✗	✗	✓	✓	📄
PC-ABSPC/ABS	Fillamentum ↗	1.75	260–280°C	90–105°C	✓	✗	✗	–	113	–	–	42	68	7	53	1.07	✗	✗	✗	–	✓	📄
PC-ABSPc Abs Fr V0	Spectrum Filaments ↗	1.75	240–270°C	80–100°C	✓	✗	✗	–	–	90	–	60	110	–	35	1.17	✗	✗	✗	–	✓	📄
PC-CFAmbrosia PC-CF	The Virtual Foundry ↗	1.75	250–290°C	100–115°C	✓	✓	✓	–	–	120	–	40	85	7.5	5.5	1.21	✗	✗	✗	–	✓	–
PC-CFCarbon PC	Print-Me ↗	2.85	270–310°C	80–120°C	✓	✗	✗	–	–	135	–	–	–	–	9.5	–	✗	✗	✗	–	~	–
PC-CFCarbon PC	Print-Me ↗	1.75	270–310°C	80–120°C	✓	✗	✗	–	–	135	–	–	–	–	9.5	–	✗	✗	✗	–	~	–
PC-CFCarbonX PC+CF	3DXTech ↗	1.75	300°C	140°C	✓	✓	✓	–	–	135	143	70	90	2	–	1.36	✗	✗	✗	–	✓	📄
PC-CFDuraPro PC PBT CF	Extrudr ↗	1.75	265–295°C	110°C	✓	✓	–	–	130	–	–	–	85	35	65	1.2	✗	✗	✗	–	✓	📄
PC-CFKratos PC CF10	FormFutura ↗	1.75	270–310°C	100–130°C	✓	✓	✓	75°C / 24h	150	129	–	76	90.2	100	–	1.22	✗	✗	✗	–	✓	📄
PC-CFPC Blend Carbon Fiber	Prusament ↗	1.75	275–295°C	100–120°C	✓	✓	✓	114°C / ?h	–	114	–	70	130	–	17	1.22	✗	✗	✗	–	✓	📄
PC-CFPC CF	Nanovia ↗	1.75	270–290°C	100–140°C	✓	✓	✓	–	–	144	120	87	–	2.7	–	1.26	✗	✗	✗	–	✓	–
PC-CFPC CF10	CR-3D ↗	1.75	255°C	100°C	✓	✓	✓	90°C / 8h	–	142	–	95	–	1.4	29	1.17	✗	✗	✗	–	✓	📄
PC-CFPC FibCR20	CR-3D ↗	1.75	300°C	110°C	✓	✓	✓	70°C / 5h	–	135	–	120	–	2.4	8	1.29	✗	✗	✗	✓	✓	📄
PC-CFPCx-CF	Nobufil ↗	1.75	275–295°C	100–120°C	✓	✓	✓	80°C / 5h	–	113	–	56	95	9	5	1.23	✗	✗	✗	–	✓	📄
PC-CFPc Cf	Spectrum Filaments ↗	1.75	270–320°C	90–130°C	✓	✓	✓	75°C / 6h	150	150	–	76	90.2	–	70	1.22	✗	✗	✗	–	✓	📄
PC-CFPrimaSelect PC-CF	PrimaCreator ↗	1.75	270–300°C	70–100°C	✓	✓	✓	–	–	102	–	70	125	6	25	1.32	✗	✗	✗	✗	✓	📄
PC-GFPC GF10	purefil ↗	1.75	290–320°C	120–150°C	✓	✓	✓	120°C / 4h	155	141	–	64	–	4	–	–	✗	✗	✗	–	✓	–
PC/ABSPC-ABS Rail	Nanovia ↗	1.75	260–290°C	120°C	✓	✗	✓	–	–	111	–	60	–	3.7	–	1.21	✗	✗	✗	–	✓	–
PC/ABSPC-ABS V0	Nanovia ↗	1.75	260–290°C	120°C	✓	✗	✓	–	–	–	–	43	–	5	50	1.18	✗	✗	✗	–	✓	–
PC/ABSPC/ABS-FR	Qidi Tech ↗	1.75	240–270°C	100–110°C	✓	–	✓	75°C / 4h	–	83/–XY/Z	105	52.51/34.26XY/Z	85.95/–XY/Z	5.55/1.88XY/Z	8.39/–XY/Z	1.19	✗	✗	✗	–	✓	📄
PCLFacilan C8	3D4Makers ↗	2.85	180–210°C	35–50°C	✗	✗	✗	–	–	55	–	45	67	–	–	1.4	✗	✗	✗	–	✓	📄
PCLFacilan C8	3D4Makers ↗	1.75	180–210°C	35–50°C	✗	✗	✗	–	–	55	–	45	67	–	–	1.4	✗	✗	✗	–	✓	📄
PCLFacilan HT	3D4Makers ↗	2.85	240–250°C	75–85°C	✗	✗	✗	–	–	89	–	62	85	7	3	1.3	✗	✗	✗	–	✓	📄
PCLFacilan HT	3D4Makers ↗	1.75	240–250°C	75–85°C	✗	✗	✗	–	–	89	–	62	85	7	3	1.3	✗	✗	✗	–	✓	📄
PCLFacilan Ortho	3D4Makers ↗	2.85	130–170°C	30–45°C	✗	✗	✗	–	–	57	-60	45	–	–	–	1.1	✓	✗	✗	–	✓	📄
PCLFacilan Ortho	3D4Makers ↗	1.75	130–170°C	30–45°C	✗	✗	✗	–	–	57	-60	45	–	–	–	1.1	✓	✗	✗	–	✓	📄
PCLFacilan PCL 100	3D4Makers ↗	1.75	120–140°C	30–45°C	✗	✗	✗	–	–	57	–	45	18	15	8	1.1	✓	✗	✗	–	✓	📄
PCLFacilan PCL 100	3D4Makers ↗	2.85	120–140°C	30–45°C	✗	✗	✗	–	–	57	–	45	18	15	8	1.1	✓	✗	✗	–	✓	📄
PCTGHyper PCTG	3DPower ↗	1.75	245–270°C	60–90°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCTGPCTG	3DJAKE ↗	1.75	250–270°C	90–110°C	✗	✗	–	–	–	64	–	46	60	220	–	1.23	✗	✗	✗	–	✓	📄
PCTGPCTG	RE3D ↗	1.75	245–270°C	80–110°C	✗	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	✓	~	–
PCTGPCTG	American Filament ↗	1.75	240–270°C	70–100°C	✗	✗	✗	–	79	61	82.5	50	61	84	5.2	1.27	✗	✗	✗	–	✓	📄
PCTGPCTG	Push Plastic ↗	1.75	230–250°C	80–90°C	✗	✗	✗	65°C / 4h	–	108	–	32	65	5	–	1.21	✗	✗	✗	–	✓	📄
PCTGPCTG	3DJAKE ↗	2.85	250–270°C	90–110°C	✗	✗	–	–	–	64	–	46	60	220	–	1.23	✗	✗	✗	–	✓	📄
PCTGPCTG	Filacraft ↗	1.75	255–260°C	70–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCTGPCTG	Extrudr ↗	1.75	230–270°C	90–110°C	✗	–	✗	–	88	76	–	–	62	215	94	1.23	✗	✗	✗	–	✓	📄
PCTGPCTG	Fiberlogy ↗	1.75	250–270°C	90–110°C	✗	✗	–	60°C / 4h	–	64	–	45	60	220	–	1.23	✗	✗	✗	–	✓	📄
PCTGPCTG	Push Plastic ↗	2.85	230–250°C	80–90°C	✗	✗	✗	65°C / 4h	–	108	–	32	–	–	–	1.21	✗	✗	✗	–	✓	📄
PCTGPCTG	Nobufil ↗	1.75	245–265°C	75–95°C	✗	✗	✗	60°C / 4h	–	65	–	50	58	14	4	1.23	✗	✗	✗	–	✓	📄
PCTGPCTG	Azure Film ↗	1.75	230–250°C	60–80°C	✗	✗	✗	–	–	–	–	44.9	56.4	320	–	1.26	✗	✗	✗	–	✓	📄
PCTGPCTG	Protopasta ↗	1.75	255–275°C	80–100°C	✗	✗	✗	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCTGPCTG Prime	Coex3D ↗	1.75	250–280°C	75–90°C	✓	✗	✗	70°C / 4h	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PCTGPctg Premium	Spectrum Filaments ↗	1.75	250–270°C	60–100°C	✗	✗	✗	–	88	64	–	46	60	220	93	1.23	✗	✗	✗	–	✓	📄
PCTGPro PCTG	3D-Fuel ↗	2.85	250–270°C	70–80°C	✗	✗	✓	67°C / 6h	–	64	76	44	73	130	–	1.23	✗	✗	✗	–	✓	📄
PCTGPro PCTG	3D-Fuel ↗	1.75	250–270°C	70–80°C	✗	✗	✓	67°C / 6h	–	64	76	44	73	130	–	1.23	✗	✗	✗	–	✓	📄
PCTG-CFCarbon Fiber PCTG	Protopasta ↗	1.75	255–275°C	80–100°C	✗	✓	✗	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PCTG-CFPCTG CF	Fiberlogy ↗	1.75	250–270°C	90–110°C	✗	✓	–	60°C / 4h	–	64	–	70	–	5	–	1.28	✗	✗	✗	–	✓	📄
PCTG-CFPCTG-CF	Nobufil ↗	1.75	255–275°C	75–95°C	✗	✓	✗	65°C / 4h	–	72	–	39	62	9	1	1.28	✗	✗	✗	–	✓	📄
PCTG-CFPCTG-CF10	3D-Fuel ↗	1.75	250–270°C	70–80°C	✗	✓	✓	67°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PCTG-CFPctg Cf10	Spectrum Filaments ↗	1.75	250–270°C	60–80°C	✗	✓	✗	–	77	77	–	–	–	5	10	1.28	✗	✗	✗	–	✓	📄
PCTG-GFPCTG GF	Fiberlogy ↗	1.75	250–270°C	90–110°C	✗	✓	–	60°C / 4h	–	64	–	55	–	8	–	1.31	✗	✗	✗	–	✓	📄
PCTG-GFPCTG-GF10	3D-Fuel ↗	1.75	250–270°C	70–80°C	✗	✓	✓	67°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PCTG-GFPctg Gf10	Spectrum Filaments ↗	1.75	250–270°C	60–80°C	✗	✓	✗	–	77	77	–	55	–	8	45	1.31	✗	✗	✗	–	✓	📄
PE-GFHDPE GF20	purefil ↗	1.75	240–280°C	80–120°C	–	✓	–	–	–	85	–	17	–	–	–	1.08	✗	✗	✗	–	✓	–
PEBAFlexfill PEBA 90A	Fillamentum ↗	1.75	225–245°C	70–90°C	✗	✗	✓	70°C / 5h	–	–	–	36	–	1000	–	1	✓	✗	✗	–	✓	📄
PEBAPEBA	Spectrum Filaments ↗	1.75	200–240°C	0–50°C	✗	✗	✓	–	–	–	–	25	5	500	–	1.02	✓	✗	✗	–	✓	📄
PEBAPEBA 85A	eSUN ↗	1.75	230–260°C	40–80°C	✗	✗	✓	–	87.5	–	–	11	–	500	–	1.05	✓	✗	✗	–	✓	–
PEBAPEBA LW	eSUN ↗	1.75	210–270°C	35–75°C	✗	✗	✓	–	–	–	–	14	–	550	–	1.24	✓	✗	✗	–	✓	–
PEBAPeba	eSUN ↗	1.75	230–260°C	60–90°C	–	✗	✓	72°C / 7h	–	–	–	–	–	–	–	1.01	✓	✗	✗	–	~	📄
PEEKALFAPEEK	FILOALFA ↗	1.75	400–430°C	100–120°C	✓	✓	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PEEKEpeek Industrial	eSUN ↗	1.75	380–440°C	130–150°C	✓	✓	✓	100°C / 4h	–	152	–	100	170	40	–	1.3	✗	✗	✗	–	✓	📄
PEEKLuvocom 3F PEEK 9581 NT	3D4Makers ↗	2.85	390–440°C	120°C	✓	✓	✓	150°C / 6h	–	145	–	97	145	5	7	1.31	✗	✗	✗	–	✓	📄
PEEKLuvocom 3F PEEK 9581 NT	3D4Makers ↗	1.75	390–440°C	120°C	✓	✓	✓	150°C / 6h	–	145	–	97	145	5	7	1.31	✗	✗	✗	–	✓	📄
PEEKPEEK	3D4Makers ↗	2.85	370–420°C	120°C	✓	✓	✓	150°C / 6h	–	156	143	105	130	30	4.2	1.26	✗	✗	✗	–	✓	📄
PEEKPEEK	3D4Makers ↗	1.75	370–420°C	120°C	✓	✓	✓	150°C / 6h	–	156	143	105	130	30	4.2	1.26	✗	✗	✗	–	✓	📄
PEEKPrimaSelect PEEK	PrimaCreator ↗	1.75	360–400°C	120°C	✓	✓	✓	–	–	–	–	97	–	–	–	1.31	✗	✗	✗	–	~	📄
PEEKR PEEK	3D4Makers ↗	2.85	400–450°C	120–160°C	✓	✓	✓	150°C / 6h	–	–	–	90	–	30	7	1.3	✗	✗	✗	–	✓	📄
PEEKR PEEK	3D4Makers ↗	1.75	400–450°C	120–160°C	✓	✓	✓	150°C / 6h	–	–	–	90	–	30	7	1.3	✗	✗	✗	–	✓	📄
PEEKThermaX PEEK	3DXTech ↗	1.75	380–400°C	130–140°C	✓	✗	✓	–	–	140	143	100	130	28	–	1.3	✗	✗	✗	–	✓	📄
PEEK-CFCarbonX PEEK+CF	3DXTech ↗	1.75	400°C	140°C	✓	✓	✓	–	–	265	143	105	136	3	–	1.39	✗	✗	✗	–	✓	📄
PEEK-CFLuvocom 3F PEEK-CF 9676 BK	3D4Makers ↗	2.85	400–450°C	110–120°C	✓	✓	✓	150°C / 6h	–	280	–	126	–	3.9	7	1.36	✗	✗	✗	–	✓	📄
PEEK-CFLuvocom 3F PEEK-CF 9676 BK	3D4Makers ↗	1.75	400–450°C	110–120°C	✓	✓	✓	150°C / 6h	–	280	–	126	–	3.9	7	1.36	✗	✗	✗	–	✓	📄
PEEK-CFPEEK CF10	purefil ↗	1.75	380–450°C	160–200°C	✓	✓	✓	150°C / 4h	225	300	–	160	–	1.7	45	1.33	✗	✗	✗	–	✓	–
PEILuvocom 3F PEI 50236 GY	3D4Makers ↗	1.75	400–450°C	130–160°C	✓	✗	✓	150°C / 6h	–	200	–	105	–	5	–	1.38	✗	✗	✗	–	✓	📄
PEILuvocom 3F PEI 50236 GY	3D4Makers ↗	2.85	400–450°C	130–160°C	✓	✗	✓	150°C / 6h	–	200	–	105	–	5	–	1.38	✗	✗	✗	–	✓	📄
PEIPEI 1010	Push Plastic ↗	1.75	375°C	160°C	✓	✗	✓	150°C / 4h	219	210	217	109.6	164.8	60	–	1.27	✗	✗	✗	–	✓	📄
PEIPEI 1010	Prusament ↗	1.75	400–420°C	140–160°C	✓	✗	✓	150°C / 7h	–	207	–	95	98	6.6	3.4	1.27	✗	✗	✗	–	✓	📄
PEIPEI 1010	Push Plastic ↗	2.85	375°C	160°C	✓	✗	✓	150°C / 4h	219	210	217	109.6	164.8	60	–	1.27	✗	✗	✗	–	✓	📄
PEIPEI 9085	Push Plastic ↗	1.75	350°C	150°C	✓	✗	✓	150°C / 4h	173	153	–	84	138	72	–	1.34	✗	✗	✗	–	✓	📄
PEIPEI 9085	Fiberlogy ↗	1.75	350–380°C	160°C	✓	✗	–	–	173	152	–	88	129	6.7	10	1.34	✗	✗	✗	–	✓	📄
PEIPEI 9085	Push Plastic ↗	2.85	350°C	150°C	✓	✗	✓	150°C / 4h	173	153	–	84	138	72	–	1.34	✗	✗	✗	–	✓	📄
PEIPEI Ultem 1000	3D4Makers ↗	1.75	355–390°C	120–160°C	✓	✗	✓	150°C / 6h	–	–	–	105	–	–	–	1.27	✗	✗	✗	–	~	–
PEIPEI Ultem 1000	3D4Makers ↗	2.85	355–390°C	120–160°C	✓	✗	✓	150°C / 6h	–	–	–	105	–	–	–	1.27	✗	✗	✗	–	~	–
PEIPEI Ultem 1010	3D4Makers ↗	2.85	360–400°C	120–160°C	✓	✗	✓	150°C / 6h	211	190	217	105	160	60	5	1.27	✗	✗	✗	–	✓	📄
PEIPEI Ultem 1010	Nanovia ↗	1.75	370–390°C	120–160°C	✓	✗	✓	–	–	200	209.37	105	–	60	5	1.27	✗	✗	✗	–	✓	–
PEIPEI Ultem 1010	3D4Makers ↗	1.75	360–400°C	120–160°C	✓	✗	✓	150°C / 6h	211	190	217	105	160	60	5	1.27	✗	✗	✗	–	✓	📄
PEIPEI Ultem 9085	3D4Makers ↗	2.85	350–380°C	120–160°C	✓	✗	✓	150°C / 6h	173	153	186	84	138	72	11	1.34	✗	✗	✗	–	✓	📄
PEIPEI Ultem 9085	3D4Makers ↗	1.75	350–380°C	120–160°C	✓	✗	✓	150°C / 6h	173	153	186	84	138	72	11	1.34	✗	✗	✗	–	✓	📄
PEIPrimaSelect PEI Ultem 1010	PrimaCreator ↗	1.75	350–390°C	120–160°C	✓	✗	✓	–	–	–	217	105	–	–	–	1.27	✗	✗	✗	–	✓	📄
PEIPrimaSelect PEI Ultem 9085	PrimaCreator ↗	1.75	350–390°C	120–160°C	✓	✗	✓	–	–	–	186	84	–	–	–	1.34	✗	✗	✗	–	✓	📄
PEIThermaX PEI 1010	3DXTech ↗	1.75	380–400°C	130–140°C	✓	✗	✓	–	–	208	217	56	110	3	–	1.27	✗	✗	✗	–	✓	📄
PEIULTEM	Filament PM ↗	1.75	350–370°C	140–150°C	✓	✗	–	–	215	200	–	–	–	–	–	1.27	✗	✗	✗	–	✓	📄
PEI-CFPEI CF Ultem 1010	Nanovia ↗	1.75	370–400°C	150°C	✓	✓	✓	–	215	200	–	–	–	–	–	1.27	✗	✗	✗	–	✓	–
PEKKLuvocom 3F PEKK 50082 NT	3D4Makers ↗	1.75	340–380°C	110–140°C	✓	✓	✓	120°C / 4h	–	–	–	90	150	–	–	1.27	✗	✗	✗	–	✓	📄
PEKKLuvocom 3F PEKK 50082 NT	3D4Makers ↗	2.85	340–380°C	110–140°C	✓	✓	✓	120°C / 4h	–	–	–	90	150	–	–	1.27	✗	✗	✗	–	✓	📄
PEKKPEKK-A	3D4Makers ↗	1.75	350–400°C	120–160°C	✓	✓	✓	120°C / 6h	–	139	158	–	–	–	5.5	1.27	✗	✗	✗	–	✓	📄
PEKKPEKK-A	3D4Makers ↗	2.85	350–400°C	120–160°C	✓	✓	✓	120°C / 6h	–	139	158	–	–	–	5.5	1.27	✗	✗	✗	–	✓	📄
PEKK-CFPEKK-A CF	Nanovia ↗	1.75	360–380°C	120–150°C	✓	✓	✓	–	–	139	160	–	–	80	5.5	1.32	✗	✗	✗	–	✓	–
PETCPE	UltiMaker ↗	2.85	250–260°C	90°C	✗	✗	✗	–	83.4	77.2	80	38.4	72.8	8.2	5.8	1.27	✗	✗	✗	–	✓	📄
PETCPE+	UltiMaker ↗	2.85	250–275°C	110°C	✗	✗	✗	–	108.7	100	105.9	33.3	68.9	130	36.7	1.18	✗	✗	✗	–	✓	📄
PETIndustrial PET Support	Raise3D ↗	1.75	230–250°C	70–80°C	✗	✗	✗	75°C / 5h	–	–	–	–	–	–	–	1.16	✗	✗	✗	–	~	📄
PETPET Luminous	eSUN ↗	1.75	–	–	–	–	–	–	–	70	–	–	–	–	–	–	✗	✗	✗	–	!	–
PETPet	eSUN ↗	1.75	250–280°C	70–90°C	–	✗	–	–	–	70	–	–/40XY/Z	95/–XY/Z	–/5XY/Z	4/–XY/Z	1.28	✗	✗	✗	–	✓	📄
PETPet Basic	eSUN ↗	1.75	250–280°C	70–90°C	–	–	✓	60°C / 8h	–	70	–	50.1/30.92XY/Z	102.8/99.1XY/Z	3.62/2.59XY/Z	2.12/2.07XY/Z	1.28	✗	✗	✗	–	✓	📄
PETPet Fr	eSUN ↗	1.75	300–320°C	70°C	–	–	✓	110°C / 5h	–	75/–XY/Z	–	47.66/20XY/Z	76.4/26.8XY/Z	3.94/2.38XY/Z	5.99/2.2XY/Z	1.52	✗	✗	✗	–	✓	📄
PETUltrafuse PET	Forward AM ↗	1.75	210–230°C	60–80°C	✗	✗	✗	60°C / 16h	66	64	71	33.4	66.7	2.7	1.6	1.329	✗	✗	✗	–	✓	📄
PET-CFFiberon PET-CF17	Polymaker ↗	1.75	270–300°C	70–80°C	✓	✓	✓	100°C / 10h	238.4	147.5	79.3	–/27.9XY/Z	109.3	2.4	5.1	1.34	✗	✗	✗	–	✓	📄
PET-CFPET CF	UltiMaker ↗	2.85	250–265°C	90–100°C	✗	✓	✗	–	92	76	78	49.3	102.8	5.5	8.6	1.33	✗	✗	✗	–	✓	📄
PET-CFPET CF15	BCN3D ↗	2.85	245–265°C	70–80°C	✗	✓	✗	–	–	80	79	63.2	108	3.7	5.4	1.366	✗	✗	✗	–	✓	📄
PET-CFPET CF15	CR-3D ↗	1.75	280°C	100°C	✓	✓	✓	70°C / 4h	–	150	–	85	–	3	40	1.4	✗	✗	✗	✓	✓	📄
PET-CFPET-CF	Mingda ↗	1.75	250–280°C	60–80°C	✗	✓	✗	65°C / 5h	–	150	–	80	110.43	2.45	6.81	1.3	✗	✗	✗	–	✓	📄
PET-CFPET-CF	Azure Film ↗	1.75	245–270°C	80–90°C	✗	✓	✗	–	–	–	–	80	130	2.5	40	1.4	✗	✗	✗	–	✓	📄
PET-CFPET-CF	Mingda ↗	2.85	250–280°C	60–80°C	✗	✓	✗	65°C / 5h	–	150	–	80	110.43	2.45	6.81	1.3	✗	✗	✗	–	✓	📄
PET-CFPET-CF	3D-Fuel ↗	1.75	280–290°C	80–100°C	✗	✓	✓	120°C / 3h	–	125	–	100	130	–	–	1.4	✗	✗	✗	–	✓	📄
PET-CFPET-CF	Material4Print ↗	1.75	260–290°C	80–100°C	✓	✓	✓	100°C / 10h	–	–	–	80	130	2.5	40	1.4	✗	✗	✗	–	✓	📄
PET-CFPET-CF	Qidi Tech ↗	1.75	270–300°C	70–80°C	✗	✓	✓	100°C / 10h	242.5	105.2	79.5	64.1/25.2XY/Z	109.3/43.7XY/Z	2.2/0.9XY/Z	25.3/3.3XY/Z	1.34	✗	✗	✗	–	✓	📄
PET-CFPET-CF	Bambu Lab ↗	1.75	260–290°C	80–100°C	–	✓	–	80°C / 10h	226	182/–XY/Z	75	74/35XY/Z	131/49XY/Z	4.5/2.4XY/Z	8.6/4.5XY/Z	1.29	✗	✗	✗	–	✓	📄
PET-CFPet Cf	eSUN ↗	1.75	250–320°C	70–120°C	–	✓	✓	90°C / 6h	–	75	70	80.32/22XY/Z	135.6/33.4XY/Z	3.61/2.11XY/Z	7.16/2.12XY/Z	1.42	✗	✗	✗	–	✓	📄
PET-CFPet Cf15	Spectrum Filaments ↗	1.75	240–270°C	50–70°C	✗	✓	✗	–	–	–	70	80	130	2.5	–	1.4	✗	✗	✗	–	✓	📄
PET-GFPET-GF	Mingda ↗	1.75	250–280°C	60–80°C	✗	✓	✗	65°C / 5h	–	99.1	–	65.05	103.48	3.18	7	1.35	✗	✗	✗	–	✓	📄
PET-GFPET-GF	Mingda ↗	2.85	250–280°C	60–80°C	✗	✓	✓	110°C / 5h	–	99.1	–	65.05	103.48	3.18	7	1.35	✗	✗	✗	–	✓	📄
PET-GFPET-GF	Qidi Tech ↗	1.75	280–320°C	60–80°C	✗	✓	✓	110°C / 5h	–	99.1	–	70.86/33.95XY/Z	114.87/–XY/Z	2.56/1.14XY/Z	6.56/–XY/Z	1.38	✗	✗	✗	–	✓	📄
PETG3DXSTAT ESD-PETG	3DXTech ↗	1.75	230–260°C	60–90°C	✗	✗	✗	–	–	75	80	50	74	13	–	1.28	✗	✗	✓	–	✓	📄
PETGAdPETG Tough	Mingda ↗	1.75	210–230°C	60°C	✗	✗	✗	–	–	62	–	26	71	120	–	1.27	✗	✗	✗	✓	✓	📄
PETGAddnite P15R	Lostboyslab ↗	1.75	225–245°C	85–90°C	✗	✗	✗	–	–	–	76	32	–	7.6	–	–	✓	✗	✗	–	✓	–
PETGAdvanced Matt PET-G	Print-Me ↗	1.75	220–250°C	60–80°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGAmbrosia PETG	The Virtual Foundry ↗	1.75	225–260°C	65–80°C	–	–	–	–	–	68	–	41	64	10	5	1.27	✗	✗	✗	–	✓	–
PETGBasic PETG	3DPower ↗	1.75	230–250°C	60–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGBioPro	3DTomorrow ↗	1.75	215–225°C	50–60°C	✗	✗	✗	–	112	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGBulk PETG	FormFutura ↗	1.75	235–255°C	80–90°C	✗	✗	✓	–	–	79	–	50.2	66.8	160	–	1.29	✗	✗	✗	–	✓	📄
PETGConductive PETG	Matter3D ↗	1.75	245–265°C	75–90°C	✗	✓	✗	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
PETGESD PETG	add:north ↗	1.75	255–270°C	80–85°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
PETGESD PETG	add:north ↗	2.85	255–270°C	80–85°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
PETGESD-PETG	Material4Print ↗	1.75	235–260°C	60–80°C	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	📄
PETGEasy PET-G	Fiberlogy ↗	1.75	220–250°C	90°C	✗	✗	–	60°C / 4h	78	62	80	51	70	–	–	1.29	✗	✗	✗	–	✓	📄
PETGEasyFil ePETG	FormFutura ↗	1.75	235–275°C	70–90°C	✗	✗	–	–	78	–	80	25	–	4.3	–	1.29	✗	✗	✗	–	✓	📄
PETGEasyPrint PETG	PrimaCreator ↗	1.75	210–235°C	–	✗	✗	✗	–	83	74	–	53	80	70	–	1.27	✗	✗	✗	–	✓	📄
PETGEpetg Hs	eSUN ↗	1.75	220–260°C	75–90°C	✗	✗	✗	–	–	68	–	29.2	63	4.2	–	1.26	✗	✗	✗	–	✓	📄
PETGEpetg Lite	eSUN ↗	1.75	245–255°C	70°C	✗	✗	✓	60°C / ?h	–	73.8/68.1XY/Z	–	68.41/35.84XY/Z	100.2/59.7XY/Z	7.56/3.17XY/Z	2.28/2.06XY/Z	1.27	✗	✗	✗	–	✓	📄
PETGFlameX PETG	CR-3D ↗	1.75	260°C	70°C	✗	✗	✓	70°C / 12h	–	79	–	–	–	40	3	1.26	✗	✗	✗	–	✓	📄
PETGGalaxy PETG+	VoxelPLA ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	72	–	52.5/46.8XY/Z	58.5	83	–	1.27	✗	✗	✗	–	✓	📄
PETGHDglass	FormFutura ↗	1.75	195–225°C	80–90°C	✗	✗	–	–	70	–	–	50	70.6	120	–	1.27	✗	✗	✗	–	✓	📄
PETGHS PETG	Kingroon ↗	1.75	220–255°C	70–90°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PETGHS PETG Matte	JAYO ↗	1.75	230–270°C	70–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGHyper PETG	Creality ↗	1.75	190–260°C	45°C	✗	✗	–	–	–	–	–	45	67.5	8	45	–	✗	✗	✗	–	✓	–
PETGHyper Speed PETG	3DPower ↗	1.75	230–255°C	60–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGIndustrial PETG ESD	Raise3D ↗	1.75	245–250°C	80°C	✗	✗	✗	–	86	–	77	36	54	7.3	5.7	1.24	✗	✗	✓	–	✓	📄
PETGLumen PET-G	Print-Me ↗	1.75	220–250°C	60–80°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGMH Build Series PETG	MatterHackers ↗	2.85	230–250°C	70–85°C	✗	✗	✗	–	–	64	–	49	–	280	–	1.23	✗	✗	✗	–	✓	📄
PETGMH Build Series PETG	MatterHackers ↗	1.75	230–250°C	70–85°C	✗	✗	✗	–	–	64	–	49	–	280	–	1.23	✗	✗	✗	–	✓	📄
PETGMatte PETG	Fiberlogy ↗	1.75	250–270°C	90°C	✗	✗	–	60°C / 4h	78	62	80	44	45	–	–	1.29	✗	✗	✗	–	✓	📄
PETGPET-G	BCN3D ↗	2.85	235–250°C	80°C	✗	✗	✗	–	–	70	–	50.4	69	22.7	8.1	1.27	✗	✗	✗	–	✓	📄
PETGPET-G	Ooznest ↗	1.75	230–250°C	60–80°C	–	–	–	–	–	70	–	50	69	23	8.1	1.27	✗	✗	✗	–	✓	📄
PETGPET-G	FILOALFA ↗	1.75	210–230°C	0–70°C	✗	✗	✗	75°C / 3h	–	70	–	50	73	–	0.1	1.27	✗	✗	✗	–	✓	📄
PETGPET-G Chameleon	Nebula Filaments ↗	2.85	220–230°C	60–90°C	✗	✗	✗	65°C / 5h	–	–	80	–	–	–	–	1.23	✗	✗	✗	–	~	📄
PETGPET-G Chameleon	Nebula Filaments ↗	1.75	220–230°C	60–90°C	✗	✗	✗	65°C / 5h	–	–	80	–	–	–	–	1.23	✗	✗	✗	–	~	📄
PETGPET-G HF	Recreus ↗	2.85	230–260°C	40–70°C	✗	✓	✓	55°C / 1h	78	62	80	50	–	31	58	1.29	✗	✗	✗	✗	✓	📄
PETGPET-G HF	Recreus ↗	1.75	230–260°C	40–70°C	✗	✓	✓	55°C / 1h	78	62	80	50	–	31	58	1.29	✗	✗	✗	✗	✓	📄
PETGPET-G Premium	Nebula Filaments ↗	2.85	220–250°C	60–80°C	✗	✗	✗	65°C / 5h	–	–	80	–	–	–	–	1.23	✗	✗	✗	–	~	📄
PETGPET-G Premium	Nebula Filaments ↗	1.75	220–250°C	60–80°C	✗	✗	✗	65°C / 5h	–	–	80	–	–	–	–	1.23	✗	✗	✗	–	~	📄
PETGPETG	CR-3D ↗	1.75	250°C	70°C	✗	✗	✗	–	–	78	–	–	–	50	5	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Hatchbox ↗	1.75	230–260°C	55–85°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PETGPETG	Geeetech ↗	1.75	220–240°C	80–90°C	✗	✗	✗	60°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	Filament PM ↗	1.75	230–270°C	80–90°C	✗	✗	–	–	85	70	–	–	–	–	11	1.24	✗	✗	✗	–	✓	📄
PETGPETG	Filament Unger ↗	1.75	205–255°C	70–90°C	✗	✗	✗	60°C / 4h	–	72	–	50	–	–	3	1.29	✗	✗	✗	–	✓	📄
PETGPETG	3DQF ↗	2.85	235–260°C	70–100°C	–	–	–	40°C / 8h	–	55	82.5	50	–	–	5.2	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Coex3D ↗	1.75	240–265°C	70–90°C	✓	✗	✗	62°C / 6h	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PETGPETG	Bavaria Filaments ↗	1.75	230–250°C	70–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PETGPETG	C-TECH ↗	1.75	230–250°C	70–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	Nobufil ↗	1.75	225–245°C	65–85°C	✗	✗	✗	60°C / 4h	–	61	–	48	44	8	3	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Qidi Tech ↗	1.75	240–260°C	70–80°C	✗	✗	–	–	78/77.3XY/Z	69.8/67.6XY/Z	81.6	45.5/37.52XY/Z	68.3/63.3XY/Z	12.7/1.5XY/Z	24.2/10.8XY/Z	1.26	✗	✗	✗	–	✓	📄
PETGPETG	Printalot ↗	2.85	230–250°C	80–90°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PETGPETG	ERYONE ↗	1.75	230–250°C	75–80°C	✗	–	✗	80°C / 12h	78	67	68	47.5/25.7XY/Z	–	4.8/2.9XY/Z	–	1.25	✗	✗	✗	–	✓	📄
PETGPETG	purefil ↗	2.85	210–260°C	50–80°C	✗	✗	✗	65°C / 4h	81	77	–	51	–	5	7	1.29	✗	✗	✗	–	✓	–
PETGPETG	Gembird ↗	1.75	220–260°C	70–90°C	✗	✗	✗	65°C / 5h	–	70	–	50	–	–	9	1.27	✗	✗	✗	–	✓	–
PETGPETG	Kingroon ↗	1.75	220–250°C	70–90°C	✗	✗	✗	65°C / 5h	–	72	–	52	78	18	–	1.27	✗	✗	✗	–	✓	–
PETGPETG	Francofil ↗	1.75	235–260°C	60–90°C	✗	✗	✗	–	–	–	78	35	64.5	2.27	–	1.3	✗	✗	✗	–	✓	📄
PETGPETG	3D4Makers ↗	2.85	220–240°C	60–80°C	✗	✗	✗	60°C / 4h	78	62	80	53	–	–	4.5	1.27	✗	✗	✗	–	✓	📄
PETGPETG	PrintWithSmile ↗	1.75	220–250°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PETGPETG	RE3D ↗	1.75	235–245°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	UltiMaker ↗	2.85	240–250°C	65–75°C	✗	✗	✗	–	82.9	76.2	77.4	38.5	78.9	7.6	7.9	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Sunlu ↗	1.75	220–250°C	60–80°C	✗	✗	✓	65°C / ?h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	add:north ↗	2.85	235–245°C	75–85°C	✗	✗	✗	65°C / 6h	–	78	80	45	72	–	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Das Filament ↗	1.75	210–240°C	80–85°C	✗	✗	✗	–	–	–	80	51	–	–	–	1.29	✗	✗	✗	–	✓	–
PETGPETG	Snapmaker ↗	1.75	230–250°C	60–80°C	✗	✗	✗	–	–	65	–	52	70	2.5	–	1.26	✗	✗	✗	–	✓	–
PETGPETG	Prusament ↗	1.75	240–260°C	70–90°C	✗	✗	✗	68°C / ?h	–	68	–	47/50XY/Z	66/70XY/Z	5.1/5.1XY/Z	6/3XY/Z	1.27	✗	✗	✗	–	✓	📄
PETGPETG	JAYO ↗	1.75	205–250°C	60–85°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PETGPETG	3DQF ↗	1.75	235–260°C	70–100°C	✗	✗	✗	40°C / 8h	–	55	82.5	50	–	–	5.2	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Sovol ↗	1.75	220°C	70°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	Keene Village Plastics ↗	2.85	230–260°C	70–100°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PETGPETG	Tronxy ↗	1.75	230–250°C	80–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	SWISSFIL ↗	2.85	210–260°C	60–80°C	–	–	–	80°C / 3h	–	70	–	50	–	120	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Overture3D ↗	1.75	230–260°C	65–70°C	✗	✗	✗	60°C / 5h	75	–	–	–/45.7XY/Z	80.1	9.3	20.2	1.3	✗	✗	✗	–	✓	📄
PETGPETG	Protopasta ↗	1.75	235–250°C	75–90°C	✗	✗	✗	60°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	Keene Village Plastics ↗	1.75	230–260°C	70–100°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PETGPETG	Material4Print ↗	1.75	235–260°C	60–80°C	✗	✗	✗	–	–	70	–	53	–	70	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Filacraft ↗	1.75	255–260°C	65–75°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	Francofil ↗	2.85	235–260°C	60–90°C	✗	✗	✗	–	–	–	78	35	64.5	2.27	–	1.3	✗	✗	✗	–	✓	📄
PETGPETG	Anycubic ↗	1.75	230–250°C	60–70°C	✗	✗	✗	60°C / 7h	72	69	74.1	52	80	13	45	1.23	✗	✗	✗	–	✓	📄
PETGPETG	Push Plastic ↗	2.85	235–250°C	80–90°C	✗	✗	✗	65°C / 4h	–	66	–	35	–	–	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Aurapol ↗	1.75	245–255°C	70–90°C	✗	✗	✗	65°C / 8h	–	68	80	46	–	–	–	1.29	✗	✗	✗	–	✓	📄
PETGPETG	Polymaker ↗	1.75	240–260°C	60–70°C	✗	✗	✗	55°C / 6h	75	65	71.24	–/45.71XY/Z	80.08	4.95	15.74	1.3	✗	✗	✗	–	✓	📄
PETGPETG	3D4Makers ↗	1.75	220–240°C	60–80°C	✗	✗	✗	60°C / 4h	78	62	80	53	–	–	4.5	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Printalot ↗	1.75	230–250°C	80–90°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	1.27	✗	✗	✗	–	~	–
PETGPETG	purefil ↗	1.75	210–260°C	50–80°C	✗	✗	✗	65°C / 4h	81	77	–	51	–	5	7	1.29	✗	✗	✗	–	✓	–
PETGPETG	Extrudr ↗	1.75	210–230°C	60–90°C	✗	–	✗	–	78	–	–	–	68	28	4.7	1.29	✗	✗	✗	–	✓	📄
PETGPETG	Fillamentum ↗	1.75	235–255°C	65–75°C	✗	✗	✓	65°C / 3h	75	62	–	50	71	120	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Nanovia ↗	1.75	220–240°C	80–90°C	✗	✗	–	–	–	–	80	43/23XY/Z	–	3.4/1.5XY/Z	20	1.27	✗	✓	✗	–	✓	–
PETGPETG	SWISSFIL ↗	1.75	210–260°C	60–80°C	✗	✗	✗	80°C / 3h	–	70	–	50	–	120	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Filamentree EU ↗	1.75	230–260°C	60–90°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	–	~	–
PETGPETG	Das Filament ↗	2.85	210–240°C	70–85°C	✗	✗	✗	–	–	–	80	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	Tronxy ↗	2.85	230–250°C	80–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG	add:north ↗	1.75	235–245°C	75–85°C	✗	✗	✗	65°C / 6h	–	78	80	45	72	–	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG	Azure Film ↗	1.75	220–240°C	80–90°C	✗	✗	✗	–	–	73	–	56.7	82.3	–	–	1.29	✗	✗	✗	–	✓	📄
PETGPETG	Devil Design ↗	1.75	220–250°C	70–80°C	✗	✗	✗	–	–	–	80	–	–	–	–	1.23	✗	✗	✗	–	~	📄
PETGPETG	Push Plastic ↗	1.75	235–250°C	80–90°C	✗	✗	✗	65°C / 4h	–	66	–	35	70	3	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG 0800 ESD	Jabil Engineered Materials ↗	2.85	–	–	–	–	✓	65°C / 6h	–	71	–	46.9	–	11	–	1.28	✗	✗	✓	–	!	📄
PETGPETG 2,85	Filament PM ↗	2.85	230–270°C	80–90°C	✗	✗	–	–	85	70	–	–	–	–	11	1.27	✗	✗	✗	–	✓	📄
PETGPETG Antistatic	CR-3D ↗	1.75	250°C	70°C	✗	✗	✓	70°C / 12h	85	–	–	50	–	15	10	1.27	✗	✗	✓	–	✓	📄
PETGPETG Basic	AMOLEN ↗	1.75	–	–	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	!	–
PETGPETG Basic	Bambu Lab ↗	1.75	230–260°C	65–75°C	✗	✗	–	65°C / 8h	69	68/–XY/Z	69	51/35XY/Z	75/56XY/Z	9.5/5.2XY/Z	34.2/10.5XY/Z	1.25	✗	✗	✗	–	✓	📄
PETGPETG ESD	Fiberlogy ↗	1.75	250–265°C	85°C	✗	✗	–	60°C / 4h	–	75	85	50	–	–	–	1.3	✗	✗	✓	–	✓	📄
PETGPETG ESD	Francofil ↗	2.85	270–290°C	80–85°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
PETGPETG ESD	Francofil ↗	1.75	270–290°C	80–85°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
PETGPETG ESD	Nanovia ↗	1.75	245–255°C	85–90°C	✗	✗	–	–	–	–	80	43/24XY/Z	–	3.4/1.5XY/Z	–	1.32	✗	✗	✓	–	✓	–
PETGPETG Economy	add:north ↗	2.85	235–245°C	75–85°C	✗	✗	✗	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Economy	add:north ↗	1.75	235–245°C	75–85°C	✗	✗	✗	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Economy	colorFabb ↗	1.75	235–255°C	70–80°C	✗	–	✗	–	–	65	70	50	70	90	4.7	1.28	✗	✗	✗	–	✓	📄
PETGPETG Gradient	Sovol ↗	1.75	220°C	70°C	–	–	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG HF	Bambu Lab ↗	1.75	230–260°C	65–75°C	✗	✗	–	65°C / 8h	70	62/–XY/Z	66	34/23XY/Z	64/48XY/Z	8.6/5.1XY/Z	6.2/10.6XY/Z	1.28	✗	✗	✗	–	✓	📄
PETGPETG HF	Snapmaker ↗	1.75	240–260°C	60–80°C	✗	✗	✗	65°C / 6h	75	–	71.2	48	80.1	9.3	4.95	1.3	✗	✗	✗	–	✓	–
PETGPETG HS	Tronxy ↗	1.75	220–250°C	80–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG High Speed	3D Fila ↗	1.75	220–260°C	70–80°C	✗	✗	✗	65°C / 5h	–	69	80	59	–	16	–	1.27	✗	✗	✗	–	✓	–
PETGPETG High Speed	Gembird ↗	1.75	220–260°C	70–90°C	✗	✗	✗	65°C / 5h	–	70	–	47	–	–	–	1.27	✗	✗	✗	–	✓	–
PETGPETG High-Speed	ERYONE ↗	1.75	240–280°C	75–80°C	✗	–	–	70°C / 12h	70	69	–	50.1/21.7XY/Z	–	4.1/2.7XY/Z	–	1.28	✗	✗	✗	–	✓	📄
PETGPETG High-Speed Burnt Titanium	ERYONE ↗	1.75	230–250°C	75–80°C	✗	–	–	65°C / 12h	78	67	68	45.7/31.7XY/Z	–	2.7/2.1XY/Z	–	–	✗	✗	✗	–	✓	📄
PETGPETG M-XR	Francofil ↗	1.75	225–250°C	65–75°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG M-XR	Francofil ↗	2.85	225–250°C	65–75°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Marble	C-TECH ↗	1.75	230–250°C	70–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Matte	Filamentree EU ↗	1.75	230–240°C	60–70°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	–	~	–
PETGPETG Matte	Matter3D ↗	1.75	235–260°C	75–90°C	✗	✗	✗	65°C / 6h	–	70	–	50	–	–	6	–	✗	✗	✗	–	✓	–
PETGPETG Matte	Prusament ↗	1.75	240–260°C	70–90°C	–	✗	–	–	–	71	–	47	64	4.2	17	1.27	✗	✗	✗	✗	✓	–
PETGPETG Matte	JAYO ↗	1.75	205–215°C	70–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Metal	Geeetech ↗	1.75	220–250°C	70–80°C	✗	✗	✗	80°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG PRO	Atomic Filament ↗	1.75	240–265°C	70–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG PRO	Atomic Filament ↗	2.85	240–265°C	70–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG PTFE	Fiberlogy ↗	1.75	220–240°C	90°C	✗	✗	–	60°C / 4h	–	–	–	25	–	–	6	1.32	✗	✗	✗	–	✓	📄
PETGPETG PTFE	Francofil ↗	2.85	230–245°C	60–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG PTFE	Francofil ↗	1.75	230–245°C	60–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Pro	Elegoo ↗	1.75	230–260°C	65–75°C	✗	✗	✗	60°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Rapido	Qidi Tech ↗	1.75	235–275°C	60–80°C	–	–	–	–	83	70	66	43/35XY/Z	74.5/58XY/Z	8.5/6.5XY/Z	35.5/10XY/Z	1.3	✗	✗	✗	–	✓	📄
PETGPETG Recycled	Aurapol ↗	1.75	220–250°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Recycled	Prusament ↗	1.75	240–260°C	70–90°C	✗	✗	✗	68°C / ?h	–	68	–	48	70	–	15	1.27	✗	✗	✗	–	✓	📄
PETGPETG Semi-Matte	colorFabb ↗	1.75	235–255°C	70–80°C	✗	–	✗	–	–	–	70	–	–	–	–	1.28	✗	✗	✗	–	~	📄
PETGPETG Translucent	Bambu Lab ↗	1.75	230–270°C	65–75°C	✗	✗	–	65°C / 8h	79	68/–XY/Z	70	33/29XY/Z	68/55XY/Z	8.2/5.2XY/Z	8.6/7.2XY/Z	1.25	✗	✗	✗	–	✓	📄
PETGPETG Translucent	Numakers ↗	1.75	230–260°C	70–85°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG Translucent	Qidi Tech ↗	1.75	240–260°C	70–80°C	–	–	–	–	78/77.3XY/Z	69.8/67.6XY/Z	81.6	45.5/37.52XY/Z	68.3/63.3XY/Z	12.7/1.5XY/Z	24.2/10.8XY/Z	1.26	✗	✗	✗	–	✓	📄
PETGPETG UV Color Change	eSUN ↗	1.75	–	–	✗	✗	✗	60°C / 8h	–	–	–	–	–	–	–	1.04	✗	✗	✗	–	!	–
PETGPETG Ultraglow	Prusament ↗	1.75	250–270°C	75–95°C	–	✓	–	–	–	78	–	42/43XY/Z	59.4/63.3XY/Z	3.7/3.9XY/Z	11/10XY/Z	1.5	✗	✗	✗	✗	✓	–
PETGPETG V0	Fiberlogy ↗	1.75	220–250°C	90°C	✗	✗	–	60°C / 4h	70	58	–	25	–	–	3	1.26	✗	✗	✗	–	✓	📄
PETGPETG V0	PrintWithSmile ↗	1.75	220–250°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PETGPETG XT	3D Fila ↗	1.75	225–255°C	80–90°C	✗	✗	✗	65°C / 5h	–	–	107	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG+	VoxelPLA ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	72	–	52.5/46.8XY/Z	58.5	83	–	1.27	✗	✗	✗	–	✓	📄
PETGPETG+	Abaflex ↗	1.75	225–265°C	70–90°C	✗	✗	✗	–	–	68	78	39.7	–	–	–	1.28	✗	✗	✗	–	✓	–
PETGPETG+OPAQUE	Abaflex ↗	1.75	225–265°C	70–90°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG-HF	Mingda ↗	2.85	230–260°C	70–80°C	✗	✗	✗	70°C / 5h	–	73	78	40	62.8	10.1	13.9	1.24	✗	✗	✗	–	✓	📄
PETGPETG-HF	Mingda ↗	1.75	230–260°C	70–80°C	✗	✗	✗	70°C / 5h	–	73	78	40	63	10	13.9	1.24	✗	✗	✗	–	✓	📄
PETGPETG-HS	Numakers ↗	1.75	240–260°C	70–85°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPETG-Tough	Qidi Tech ↗	1.75	230–260°C	70–80°C	–	✗	–	–	–	65	80	44.23/42.7XY/Z	71.4/–XY/Z	14.04/4.51XY/Z	16.39/–XY/Z	1.27	✗	✗	✗	–	✓	📄
PETGPRO Series PETG	MatterHackers ↗	2.85	230–250°C	65°C	✗	✗	✗	–	–	–	80	74.5	–	5	–	1.27	✗	✗	✗	–	✓	📄
PETGPRO Series PETG	MatterHackers ↗	1.75	230–250°C	65°C	✗	✗	✗	–	–	–	80	74.5	–	5	–	1.27	✗	✗	✗	–	✓	📄
PETGPerformance PETG HF	Matter3D ↗	1.75	235–260°C	75–90°C	✗	✗	✗	65°C / 6h	–	75	–	55	–	–	8	–	✗	✗	✗	–	✓	–
PETGPet G Fr V0	Spectrum Filaments ↗	1.75	240–260°C	60–80°C	✗	✗	✗	–	70	58	70	–	–	40	3	1.26	✗	✗	✗	–	✓	📄
PETGPet G Fx120	Spectrum Filaments ↗	1.75	240–260°C	80–100°C	✓	✗	✓	–	170	–	–	22	–	400	–	1.13	✗	✗	✗	–	✓	📄
PETGPet G Glitter	Spectrum Filaments ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	70	–	–	64	58	–	1.27	✗	✗	✗	–	✓	📄
PETGPet G Glow	Spectrum Filaments ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	70	–	48	64	58	–	1.27	✗	✗	✗	–	✓	📄
PETGPet G Ht100	Spectrum Filaments ↗	1.75	250–280°C	80–100°C	✓	✗	✓	–	–	100	70	52	64	210	–	1.18	✗	✗	✗	–	✓	📄
PETGPet G Matt	Spectrum Filaments ↗	1.75	240–260°C	60–80°C	✗	✗	✗	–	85	70	70	45/30XY/Z	–	40	3.5	1.35	✗	✗	✗	–	✓	📄
PETGPet G Premium	Spectrum Filaments ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	78	–	48	64	58	–	1.27	✗	✗	✗	–	✓	📄
PETGPet G Premium High Speed	Spectrum Filaments ↗	1.75	230–270°C	60–80°C	✗	✗	✗	60°C / 4h	–	79	–	35	64	10	–	1.29	✗	✗	✗	–	✓	📄
PETGPet G Ptfe	Spectrum Filaments ↗	1.75	240–260°C	60–80°C	✗	✗	✗	–	70	–	–	40/25XY/Z	–	3.7/–XY/Z	70	1.32	✗	✗	✗	–	✓	📄
PETGPetg	eSUN ↗	1.75	230–260°C	75–90°C	✗	✗	✓	60°C / 8h	–	64	–	34.77/28.65XY/Z	41.9/39.9XY/Z	5.15/3.91XY/Z	4.86/1.78XY/Z	1.27	✗	✗	✗	–	✓	📄
PETGPetg Esd	Spectrum Filaments ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	72	–	–	64	58	–	1.19	✗	✗	✗	–	✓	📄
PETGPetg Esd	eSUN ↗	1.75	240–260°C	70°C	✗	✗	✓	65°C / 8h	–	68	–	48.11/19.34XY/Z	77.7/41.2XY/Z	8.97/2.52XY/Z	4.95/1.93XY/Z	1.22	✗	✗	✗	–	✓	📄
PETGPetg Lw	eSUN ↗	1.75	245–250°C	60°C	✗	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGPetg Matte	eSUN ↗	1.75	240–260°C	70°C	✗	✗	✓	60°C / ?h	–	71.1	–	49.79/19.51XY/Z	77.1/30.1XY/Z	13.49/2.71XY/Z	2.2/2.29XY/Z	1.35	✗	✗	✗	–	✓	📄
PETGPolyLite PETG	Polymaker ↗	1.75	230–260°C	70–80°C	✗	✗	✗	65°C / 6h	84	75	81	–/42.8XY/Z	69.6	8.4	2.6	1.25	✗	✗	✗	–	✓	📄
PETGPolyMax PETG	Polymaker ↗	1.75	230–240°C	70–80°C	✗	✗	✗	65°C / 6h	82	72.3	79	–/28.3XY/Z	57.3	13.1	10	1.24	✗	✗	✗	–	✓	📄
PETGPolyMax PETG-ESD	Polymaker ↗	1.75	250–290°C	70–80°C	✗	✗	✗	65°C / 6h	86	72	77	–/20.7XY/Z	54	7.3	5.7	1.24	✗	✗	✓	–	✓	📄
PETGPremium PETG	Raise3D ↗	1.75	230–240°C	80°C	✗	✗	✗	–	84	–	81	31.9	53.7	6.8	5.1	1.3	✗	✗	✗	–	✓	📄
PETGPremium PETG Flame Retardant	FormFutura ↗	1.75	225–270°C	60–80°C	✗	✗	✓	65°C / 12h	70	58	–	40	–	40	–	1.26	✗	✗	✗	–	✓	📄
PETGPrimaSelect PETG	PrimaCreator ↗	1.75	225–245°C	70–80°C	✗	✗	✗	–	80	70	70	42.5	67.5	9	75	1.27	✗	✗	✗	✗	✓	📄
PETGPro PETG	3D-Fuel ↗	1.75	245–265°C	70–90°C	✗	✗	✗	71°C / 5h	–	62	–	25	75	30	–	1.28	✗	✗	✗	–	✓	📄
PETGPro PETG	3D-Fuel ↗	2.85	245–265°C	70–90°C	✗	✗	✗	71°C / 5h	–	62	–	25	75	30	–	1.28	✗	✗	✗	–	✓	📄
PETGR Petg	Spectrum Filaments ↗	1.75	230–260°C	60–80°C	✗	✗	✗	–	–	70	–	–	68	400	–	1.23	✗	✗	✗	–	✓	📄
PETGRapid PETG	Elegoo ↗	1.75	230–260°C	65–70°C	✗	✗	✗	60°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGReFill PETG	FormFutura ↗	1.75	220–250°C	75–80°C	✓	✗	✓	45°C / 12h	–	78	–	20	–	–	–	1.29	✗	✗	✗	–	✓	📄
PETGReForm - rPET	FormFutura ↗	1.75	230–255°C	60–80°C	✓	✗	✓	52°C / 12h	–	70	–	59	68	400	–	1.23	✗	✗	✗	–	✓	📄
PETGRePETG	Filament PM ↗	1.75	230–270°C	60–80°C	–	✗	–	–	85	70	–	–	–	–	11	1.27	✗	✗	✗	–	✓	–
PETGSelect PETG	3DPower ↗	1.75	230–250°C	60–80°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGSoleyin Basic PETG	Creality ↗	1.75	230–250°C	–	✗	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGStatic Dissipative PETG	Protopasta ↗	1.75	250–290°C	70–80°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✓	✗	~	📄
PETGSwift PET-G	Print-Me ↗	2.85	220–250°C	30–60°C	✗	✗	✗	65°C / 4h	–	70	–	–	–	–	1.2	1.15	✗	✗	✗	–	✓	–
PETGSwift PET-G	Print-Me ↗	1.75	220–250°C	30–60°C	✗	✗	✗	65°C / 4h	–	70	–	–	–	–	1.2	1.15	✗	✗	✗	–	✓	–
PETGSwift PET-G ESD	Print-Me ↗	1.75	220–250°C	60–80°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✓	–	~	–
PETGSwift PET-G V0	Print-Me ↗	1.75	230–250°C	70–80°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGThe Filament Petg	Spectrum Filaments ↗	1.75	230–255°C	60–80°C	✗	✗	✗	–	–	70	–	46.9	–	4.4	–	1.27	✗	✗	✗	–	✓	📄
PETGThe Filament Petg Lite	Spectrum Filaments ↗	1.75	235–255°C	60–80°C	✗	✗	✗	–	–	77	–	49.8	66.8	160	–	1.29	✗	✗	✗	–	✓	📄
PETGTritan HT	3D Fila ↗	1.75	240–260°C	75–90°C	✗	✗	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGUltrafuse rPET	Forward AM ↗	1.75	225–245°C	65–85°C	✗	✗	✗	60°C / 8h	73	69	83	38.6	66.9	4.3	4	1.287	✗	✗	✗	–	✓	📄
PETGHT	colorFabb ↗	1.75	250–280°C	100–120°C	✓	–	✗	–	–	94	100	50	–	–	6.4	1.18	✗	✗	✗	–	✓	📄
PETGXT	colorFabb ↗	1.75	240–260°C	60–70°C	✗	–	✗	–	–	65	75	55	–	–	5	1.27	✗	✗	✗	–	✓	📄
PETGeasyPETG	3DJAKE ↗	1.75	230–250°C	60–90°C	✗	✗	–	–	78	–	–	53	71	31	–	1.29	✗	✗	✗	–	✓	📄
PETGeasyPETG Matte	3DJAKE ↗	2.85	210–240°C	60–90°C	✗	✗	–	–	85	–	–	53	–	7.6	78	1.41	✗	✗	✗	–	✓	📄
PETGeasyPETG Matte	3DJAKE ↗	1.75	210–240°C	60–90°C	✗	✗	–	–	85	–	–	53	–	7.6	78	1.41	✗	✗	✗	–	✓	📄
PETGnGen	colorFabb ↗	1.75	220–240°C	75–85°C	✗	–	✗	–	–	71	85	54	–	–	3.3	1.2	✗	✗	✗	–	✓	📄
PETGrPET fifty	CREAMELT ↗	1.75	255–265°C	80–90°C	✗	✗	✓	100°C / 5h	–	–	78	49	–	3	115	1.15	✗	✗	✗	–	✓	📄
PETGrPET-G	Print-Me ↗	1.75	220–250°C	60–80°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETGrPETG	colorFabb ↗	1.75	230–255°C	60–80°C	✗	–	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PETGrPETG	Filamentive ↗	1.75	195–235°C	60–80°C	✗	✗	✗	65°C / 7h	–	70	–	50.4	69	22.7	8.1	1.27	✗	✗	✗	–	✓	📄
PETGrPETG Matte	Lostboyslab ↗	1.75	230–250°C	–	✗	✗	✗	–	–	72	–	49	–	4.1	–	–	✗	✗	✗	–	✓	–
PETGrePETG	PrintWithSmile ↗	1.75	220–250°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PETGxPETG MATT	Extrudr ↗	1.75	210–240°C	60–90°C	✗	–	–	–	85	–	–	–	–	7.6	1.7	1.41	✗	✗	✗	–	✓	📄
PETG-CFCF PETG	Filamentive ↗	1.75	230–250°C	60–75°C	✗	✓	✗	70°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFCarbon Fiber PET-G	Print-Me ↗	2.85	240–260°C	35–80°C	✗	✓	✗	65°C / 4h	–	–	–	–	–	–	–	1.25	✗	✗	✗	–	~	–
PETG-CFCarbon Fiber PET-G	Print-Me ↗	1.75	240–260°C	35–80°C	✗	✓	✗	65°C / 4h	–	–	–	–	–	–	–	1.25	✗	✗	✗	–	~	–
PETG-CFCarbon Fiber PETG	Push Plastic ↗	2.85	240–250°C	90°C	✗	✓	✗	65°C / 6h	–	65.8	–	37.1	74.4	3.87	–	1.1	✗	✗	✗	–	✓	📄
PETG-CFCarbon Fiber PETG	Push Plastic ↗	1.75	240–250°C	90°C	✗	✓	✗	65°C / 6h	–	65.8	–	37.1	74.4	3.87	–	1.1	✗	✗	✗	–	✓	📄
PETG-CFCarbon Fiber PETG	Protopasta ↗	1.75	245–260°C	75–90°C	✗	✓	✗	65°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFCarbon PETG	Filamentree EU ↗	1.75	230–260°C	70–90°C	✗	✓	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFCarbonFil	FormFutura ↗	1.75	230–275°C	80–90°C	✓	✓	✗	50°C / 12h	80	–	–	45	–	4.9	5.4	1.32	✗	✗	✗	–	✓	📄
PETG-CFCarbonFil CF03	FormFutura ↗	1.75	240–280°C	75–85°C	✗	✓	✓	–	–	77	–	44	–	5.5	–	1.29	✗	✗	✗	–	✓	📄
PETG-CFCarbonX PETG+CF	3DXTech ↗	1.75	245°C	60°C	✗	✓	✗	–	–	77	80	56	80	3	–	1.34	✗	✗	✗	–	✓	📄
PETG-CFEpetg Cf	eSUN ↗	1.75	240–260°C	75–90°C	✗	✓	✓	–	–	70	–	–/28XY/Z	80.8/–XY/Z	–/3.6XY/Z	5.2/–XY/Z	1.26	✗	✗	✗	–	✓	📄
PETG-CFFiberon PETG-rCF08	Polymaker ↗	1.75	240–270°C	60–70°C	✗	✓	✓	65°C / 3h	81.6	65.7	69.7	–/41.1XY/Z	94.6	5.7	4	1.3	✗	✗	✗	–	✓	📄
PETG-CFHyper PETG-CF	Creality ↗	1.75	240–260°C	70–90°C	–	✓	–	–	–	–	–	44.9	88.1	8.7	–	1.24	✗	✗	✗	–	✓	–
PETG-CFPET-G CF	Recreus ↗	1.75	245–260°C	70°C	✓	✓	✓	55°C / 1h	80	67	–	105	–	4	6.5	1.32	✗	✗	✗	✗	✓	📄
PETG-CFPETG CF	Fiberlogy ↗	1.75	230–260°C	90°C	✗	✓	–	60°C / 4h	77	69	–	105	–	–	6.5	1.32	✗	✗	✗	–	✓	📄
PETG-CFPETG CF	Nanovia ↗	1.75	220–240°C	80–90°C	✗	✓	–	–	–	–	80	50/28XY/Z	–	2.7/1.6XY/Z	20	1.35	✗	✗	✗	–	✓	–
PETG-CFPETG Carbon	3D4Makers ↗	1.75	240–280°C	70–80°C	✗	✓	✗	65°C / 6h	–	–	76	52.9	–	3.4	4.03	1.317	✗	✗	✗	–	✓	📄
PETG-CFPETG Carbon	3D4Makers ↗	2.85	240–280°C	70–80°C	✗	✓	✗	65°C / 6h	–	–	76	52.9	–	3.4	4.03	1.317	✗	✗	✗	–	✓	📄
PETG-CFPETG Carbon Fiber	Prusament ↗	1.75	255–275°C	80–100°C	✗	✓	✓	–	–	–	–	–	–	–	–	1	✗	✗	✗	–	~	–
PETG-CFPETG+CF	Abaflex ↗	1.75	225–265°C	70–90°C	✗	✓	✗	–	–	–	–	39.5	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPETG-CF	Kingroon ↗	1.75	230–260°C	70–90°C	✗	✓	✗	65°C / 6h	–	95	–	68	105	4	28	1.3	✗	✗	✗	–	✓	–
PETG-CFPETG-CF	Sunlu ↗	1.75	240–270°C	70–90°C	✗	✓	✓	65°C / ?h	–	70	65	35/–XY/Z	55	30	20/5.5XY/Z	1.26	✗	✗	✗	–	✓	📄
PETG-CFPETG-CF	Atomic Filament ↗	1.75	240–265°C	60–78°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPETG-CF	Atomic Filament ↗	2.85	240–265°C	60–78°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPETG-CF	C-TECH ↗	1.75	230–250°C	70–80°C	✗	✓	✗	65°C / 5h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPETG-CF	Qidi Tech ↗	1.75	240–270°C	70–80°C	–	✓	–	–	83	77	66	53.5/28XY/Z	89.5/48.5XY/Z	5/4.5XY/Z	25/8XY/Z	1.29	✗	✗	✗	–	✓	📄
PETG-CFPETG-CF	ERYONE ↗	1.75	230–250°C	75–80°C	✗	✓	✗	80°C / 12h	85	68	68	48.7/24.1XY/Z	–	1.9/1.5XY/Z	–	1.25	✗	✗	✗	–	✓	📄
PETG-CFPETG-CF	Francofil ↗	1.75	225–255°C	60–90°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPETG-CF	Anycubic ↗	1.75	240–270°C	65–75°C	✗	✓	✗	63°C / 7h	74	67	–	54	88	12	60	1.32	✗	✗	✗	–	✓	📄
PETG-CFPETG-CF	Elegoo ↗	1.75	240–270°C	65–75°C	✗	✓	✗	70°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPETG-CF	Bambu Lab ↗	1.75	240–270°C	65–75°C	✗	✓	–	65°C / 8h	85	–	68	35/29XY/Z	70/48XY/Z	10.4/4.7XY/Z	15.7/10.7XY/Z	1.25	✗	✗	✗	–	✓	📄
PETG-CFPETG-CF	Nobufil ↗	1.75	245–265°C	70–90°C	✗	✓	✗	65°C / 4h	–	93	–	55	81	11.6	2	1.34	✗	✗	✗	–	✓	📄
PETG-CFPETG-CF HF	Matter3D ↗	1.75	235–260°C	75–90°C	✗	✓	✗	65°C / 6h	–	77.5	–	65	–	–	12	–	✗	✗	✗	–	✓	–
PETG-CFPETG-CFJet	Filament PM ↗	1.75	220–250°C	80–90°C	✗	✓	✗	–	85	70	–	–	–	–	23	1.27	✗	✗	✗	–	✓	–
PETG-CFPet G Carbon	Spectrum Filaments ↗	1.75	240–260°C	60–80°C	✗	✓	✗	–	80	–	–	45	–	4.9	5.4	1.32	✗	✗	✗	–	✓	📄
PETG-CFPrografen Petg Graphene Light	Spectrum Filaments ↗	1.75	215–265°C	60–80°C	✗	✗	✗	–	–	78	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFPrografen Petg Graphene Strong	Spectrum Filaments ↗	1.75	215–265°C	60–80°C	✗	✗	✗	–	–	–	70	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-CFRigid X	add:north ↗	2.85	260–270°C	65–75°C	✗	✓	✗	70°C / 6h	–	82	80	52	89	8	–	1.32	✗	✗	✗	–	✓	📄
PETG-CFRigid X	add:north ↗	1.75	260–270°C	65–75°C	✗	✓	✗	70°C / 6h	–	82	80	52	89	8	–	1.32	✗	✗	✗	–	✓	📄
PETG-CFThe Filament Petg Cf	Spectrum Filaments ↗	1.75	240–265°C	60–80°C	✗	✓	✗	–	–	70	–	57.6	–	–	3.2	1.29	✗	✗	✗	–	✓	📄
PETG-CFXT-CF20	colorFabb ↗	1.75	240–260°C	60–70°C	✗	✓	–	–	–	–	80	56	70	–	2.5	1.4	✗	✗	✗	–	✓	📄
PETG-CFeasyPETG CF	3DJAKE ↗	1.75	220–250°C	60–90°C	✗	✓	–	–	85	68	–	72	85	9	4	1.31	✗	✗	✗	–	✓	📄
PETG-CFnGen CF10	colorFabb ↗	1.75	220–230°C	75–85°C	✗	✓	–	–	–	78	85	44.7	73.4	–	2.2	1.2	✗	✗	✗	–	✓	📄
PETG-CFxPETG CF	Extrudr ↗	1.75	220–250°C	60–90°C	✗	✓	–	–	85	–	–	–	–	9.4	1.7	1.29	✗	✗	✗	–	✓	📄
PETG-ESDESD	Filament PM ↗	1.75	270–290°C	80–90°C	–	✗	–	–	85	70	–	–	–	–	–	1.32	✗	✗	✗	–	✓	📄
PETG-FRFRJet	Filament PM ↗	1.75	220–250°C	80–90°C	✓	✗	✓	65°C / 10h	85	70	–	–	–	–	–	1.24	✗	✗	✗	–	✓	📄
PETG-FRPETG V0	Prusament ↗	1.75	220–240°C	70–90°C	✗	✗	✓	–	–	68	–	39/42XY/Z	60/64XY/Z	3.5/3.7XY/Z	23/33XY/Z	1.27	✗	✗	✗	–	✓	–
PETG-GFGlass 807	Nebula Filaments ↗	2.85	210–240°C	50–70°C	✗	✓	✗	65°C / 5h	80	–	–	27	–	–	–	1.02	✗	✗	✗	–	✓	📄
PETG-GFGlass 807	Nebula Filaments ↗	1.75	210–240°C	50–70°C	✗	✓	✗	65°C / 5h	80	–	–	27	–	–	–	1.02	✗	✗	✗	–	✓	📄
PETG-GFPETG GF UV	Nanovia ↗	1.75	220–240°C	80–90°C	✗	✓	–	–	–	–	80	42/27XY/Z	–	2.6/1.5XY/Z	–	1.42	✗	✗	✗	✓	✓	–
PETG-GFPETG-GF	Qidi Tech ↗	1.75	250–275°C	60–80°C	–	✓	–	–	85	76	66	48/28XY/Z	79/39.5XY/Z	8.5/4.5XY/Z	30/10XY/Z	1.265	✗	✗	✗	–	✓	📄
PETG-GFPETG-GF	Elegoo ↗	1.75	240–270°C	65–75°C	✗	✓	✗	60°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PETG-GFPETG-GF	Nobufil ↗	1.75	245–265°C	70–90°C	✗	✓	✗	65°C / 4h	–	94	–	56	82	8	2	1.36	✗	✗	✗	–	✓	📄
PETG-GFPETG-GF	ERYONE ↗	1.75	250–280°C	60–70°C	✗	✓	–	65°C / 8h	–	80	75	53.6/25.1XY/Z	–	1.9/1.7XY/Z	–	1.33	✗	✗	✗	–	✓	📄
PETG-MetalPETG Magnetite 40	Prusament ↗	1.75	265–275°C	90–110°C	✗	✓	✓	–	–	–	–	–	–	–	–	1.82	✗	✗	✗	–	~	–
PETG-MetalPETG Tungsten 75	Prusament ↗	1.75	250–270°C	70–90°C	✗	✓	✗	94°C / ?h	–	94	–	35	59	–	–	4	✗	✗	✗	–	✓	📄
PHAPLA/PHA	colorFabb ↗	1.75	195–220°C	50–60°C	✗	–	✗	–	–	51	55	57.7	90.4	6.1	2.6	1.21	✗	✗	✗	✗	✓	📄
PIPI Z2	3D4Makers ↗	1.75	390–410°C	120–160°C	✓	✓	✓	120°C / 5h	–	167	195	89	–	4.8	5.3	1.51	✗	✗	✗	–	✓	📄
PIPI Z2	3D4Makers ↗	2.85	390–410°C	120–160°C	✓	✓	✓	120°C / 5h	–	167	195	89	–	4.8	5.3	1.51	✗	✗	✗	–	✓	📄
PLAALFAOHM	FILOALFA ↗	1.75	190–210°C	0–50°C	✗	✓	✗	–	–	–	–	25	–	12	9	1.35	✗	✗	✓	✗	✓	📄
PLAAdvanced Matt PLA	Print-Me ↗	1.75	–	40–60°C	✗	✗	✗	–	–	70	–	–	–	–	6.1	1.17	✗	✗	✗	✗	✓	–
PLAAdvanced Silk	Print-Me ↗	1.75	220–250°C	60–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAAmbrosia PLA	The Virtual Foundry ↗	1.75	190–220°C	0–65°C	–	✗	✗	–	–	53	–	45	69	13	4.5	1.25	✗	✗	✗	–	✓	–
PLAAmpere PLA	Print-Me ↗	1.75	220–250°C	40–60°C	✗	✗	✗	–	–	70	–	–	1500	–	–	1.35	✗	✗	✓	✗	✓	–
PLAAstro PLA	3DTomorrow ↗	1.75	205–225°C	50–60°C	✗	✗	✗	–	–	–	57	70	–	–	3.4	1.24	✗	✗	✗	✗	✓	📄
PLABIOFIL	PrintWithSmile ↗	1.75	210–240°C	60–80°C	✗	✗	✗	–	114	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLABasic PLA	Protopasta ↗	1.75	195–225°C	50–70°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLABasic PLA	3DPower ↗	1.75	195–220°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLABasic PLA	Snapmaker ↗	1.75	190–210°C	25–60°C	✗	✗	✗	–	63	60	61	66	98	9	2.7	1.24	✗	✗	✗	✗	✓	–
PLABasics PLA	Matter3D ↗	1.75	200–225°C	40–65°C	✗	✗	✗	–	–	62.5	–	62.5	–	–	–	–	✗	✗	✗	✗	~	–
PLABasics PLA	American Filament ↗	1.75	205–220°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	57.5	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLABioFusion	Extrudr ↗	1.75	200–230°C	20–60°C	✗	–	✗	–	75	–	–	55	–	41	–	1.25	✗	✗	✗	–	✓	📄
PLABrass HTPLA	Protopasta ↗	1.75	195–230°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLABreakaway Support PLA	Snapmaker ↗	1.75	220–230°C	25–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLABurnt Titanium PLA	ERYONE ↗	1.75	190–220°C	55–70°C	✗	–	–	70°C / 12h	54	53	62	52.2/34.2XY/Z	–	2.1/1.9XY/Z	–	1.23	✗	✗	✗	–	✓	📄
PLACMYK Lithophane PLA	BIQU ↗	1.75	200–240°C	25–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLACR-Silk PLA	Creality ↗	1.75	190–220°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLACR-Wood	Creality ↗	1.75	190–230°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLACRystal PLA	CR-3D ↗	1.75	210°C	0–50°C	✗	✗	✗	–	–	125	–	–	–	27	23	1.31	✗	✗	✗	✗	✓	📄
PLACalcium Carbonate PLA	Protopasta ↗	1.75	200–220°C	45°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLACmyk	eSUN ↗	1.75	210–230°C	45–60°C	✗	✗	✗	50°C / 8h	–	53	–	53.34/31.2XY/Z	81.16/59.8XY/Z	4.11/2.6XY/Z	5.5/2.51XY/Z	1.23	✗	✗	✗	✗	✓	📄
PLAConductive PLA	Protopasta ↗	1.75	195–225°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAConductive PLA	Matter3D ↗	1.75	205–225°C	55–65°C	✗	✗	✗	45°C / 6h	–	57.5	–	55	–	–	–	–	✗	✗	✓	✗	~	–
PLACopper HTPLA	Protopasta ↗	1.75	195–230°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLADraft PLA	Polymaker ↗	1.75	190–230°C	25–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLADual Silk PLA	PrintWithSmile ↗	1.75	190–230°C	60–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAE-HT PLA	Print-Me ↗	1.75	198–215°C	40–60°C	✗	✗	✗	–	–	–	–	40	–	–	0.4	1.3	✗	✗	✗	✗	✓	–
PLAE-PLA	add:north ↗	2.85	210–220°C	55–65°C	✗	✗	✗	55°C / 4h	–	55	57.5	58	120	8	–	1.24	✗	✗	✗	✗	✓	📄
PLAE-PLA	add:north ↗	1.75	210–220°C	55–65°C	✗	✗	✗	55°C / 4h	–	55	57.5	58	120	8	–	1.24	✗	✗	✗	✗	✓	📄
PLAE4d 1	eSUN ↗	1.75	200–230°C	45–60°C	✗	✗	✗	–	–	–	–	48.89	49.45	168.83	–	1.23	✗	✗	✗	✗	✓	📄
PLAECOMAX PLA	3DXTech ↗	1.75	210°C	23°C	✗	✗	✗	–	–	80	55	56	115	8	–	1.24	✗	✗	✗	✗	✓	📄
PLAECOMAX Tough PLA	3DXTech ↗	1.75	200–230°C	23–60°C	✗	✗	✗	–	–	80	55	53	98	65	–	1.22	✗	✗	✗	✗	✓	📄
PLAESD-PLA	Material4Print ↗	1.75	210–230°C	40–65°C	–	–	–	–	–	67.5	–	37	–	–	–	1.27	✗	✗	✓	–	✓	📄
PLAEasy PLA	Fiberlogy ↗	1.75	200–230°C	50–70°C	✗	✗	✗	50°C / 4h	–	55	57.5	53	81	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAEasyFil ePLA	FormFutura ↗	1.75	200–275°C	50–60°C	✗	✗	✗	–	–	55	60	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAEasyPrint PLA	PrimaCreator ↗	1.75	185–220°C	–	✗	✗	✗	–	–	–	61	63	–	6	3.5	1.24	✗	✗	✗	✗	✓	📄
PLAEcoLine PLA	Print-Me ↗	2.85	192–208°C	20–60°C	✗	✗	✗	–	–	80	–	–	–	–	2.9	1.2	✗	✗	✗	✗	✓	–
PLAEcoLine PLA	Print-Me ↗	1.75	192–208°C	20–60°C	✗	✗	✗	–	–	80	–	–	–	–	2.9	1.2	✗	✗	✗	✗	✓	–
PLAEmarble	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	–	–	53	–	–	–	1.24	✗	✗	✗	✗	~	📄
PLAEnder Fast PLA	Creality ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	–	–	46.23	115.6	–	–	–	✗	✗	✗	✗	~	–
PLAEngineering PLA	Layer Line Filament ↗	1.75	205–240°C	45–75°C	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLAEntwined Hemp	3D-Fuel ↗	1.75	190–220°C	–	✗	✗	✗	45°C / 4h	–	–	–	41	–	1.8	–	–	✗	✗	✗	✗	~	📄
PLAEpla Chameleon	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	52	–	26.1	115.6	3.9	–	1.21	✗	✗	✗	✗	✓	📄
PLAEpla Gloss	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	–	–	64.51	68.99	31.54	–	1.26	✗	✗	✗	✗	✓	📄
PLAEpla Hs	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	53	–	59	81	15	–	1.21	✗	✗	✗	✗	✓	📄
PLAEpla Lite	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	–	–	53.05/26.88XY/Z	90.57/62.2XY/Z	3.89/2.39XY/Z	4.53/2.33XY/Z	1.23	✗	✗	✗	✗	✓	📄
PLAEpla Luminous	eSUN ↗	1.75	190–230°C	45–60°C	✗	✓	✗	–	–	53	–	72	90	11.8	–	1.2	✗	✗	✗	✗	✓	📄
PLAEpla Lw	eSUN ↗	1.75	190–280°C	45–60°C	✗	✗	✗	–	–	53	–	32.2	41.31	68.9	–	1.2	✗	✗	✗	✗	✓	📄
PLAEpla Magic	eSUN ↗	1.75	190–220°C	45–60°C	✗	✗	✗	–	–	52.3	–	34.18	112	4.25	–	1.21	✗	✗	✗	✗	✓	📄
PLAEpla Matte	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	51	–	25.976/14.31XY/Z	42.6/21.1XY/Z	7.23/2.26XY/Z	4.7/2.15XY/Z	1.329	✗	✗	✗	✗	✓	📄
PLAEpla Matte Dual	eSUN ↗	1.75	215–230°C	45–60°C	✗	✗	✗	–	–	54	–	13.58	56.72	39	–	1.174	✗	✗	✗	✗	✓	📄
PLAEpla Matte Rainbow 2	eSUN ↗	1.75	210–230°C	65°C	✗	✗	✓	60°C / 8h	–	50.2	–	39.81/16.23XY/Z	65/26.6XY/Z	5.75/1.8XY/Z	3.67/2.41XY/Z	1.329	✗	✗	✗	✗	✓	📄
PLAEpla Metal	eSUN ↗	1.75	5–60°C	5–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.255	✗	✗	✗	✗	~	–
PLAEpla Silk Candy	eSUN ↗	1.75	200–220°C	45–60°C	✗	✗	✗	–	–	52.15	–	19.33	85.18	3.03	–	1.24	✗	✗	✗	✗	✓	📄
PLAEpla Silk Rainbow	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	55.85	–	11.1	75.34	3.05	–	1.21	✗	✗	✗	✗	✓	📄
PLAEpla St	eSUN ↗	1.75	200–230°C	45–60°C	✗	✗	✗	–	–	52	–	34.3	43	90	–	1.25	✗	✗	✗	✗	✓	📄
PLAEplahs	eSUN ↗	1.75	210–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	54	–	53.12/32XY/Z	83/58.6XY/Z	4.01/2.8XY/Z	5.6/2.41XY/Z	1.24	✗	✗	✗	✗	✓	📄
PLAEsilk Pla	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	50	–	32.53/17.36XY/Z	44.4/23.1XY/Z	11.65/1.84XY/Z	2.93/2.19XY/Z	1.21	✗	✗	✗	✗	✓	📄
PLAEsilk Pla Magic	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	54.7	–	52	65	14.4	–	1.256	✗	✗	✗	✗	✓	📄
PLAEsilk Pla Mystic	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	54.7	–	52	65	14.4	–	1.23	✗	✗	✗	✗	✓	📄
PLAEstars Pla	eSUN ↗	1.75	210–230°C	45–60°C	✗	✓	✗	–	–	53	–	72	90	11.8	–	1.2	✗	✗	✗	✗	✓	📄
PLAEtwinkling	eSUN ↗	1.75	200–230°C	45–60°C	✗	✗	✗	–	–	67	–	58	70	–	–	1.41	✗	✗	✗	✗	✓	📄
PLAFLAX	Extrudr ↗	1.75	180–240°C	20–60°C	✗	–	–	–	48	–	–	43	30	22.3	–	1.45	✗	✗	✗	–	✓	📄
PLAFiberSatin	Fiberlogy ↗	1.75	200–230°C	60°C	✗	✗	✗	40°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAFiberSilk	Fiberlogy ↗	1.75	210–230°C	60°C	✗	✗	✗	40°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAFiberWood	Fiberlogy ↗	1.75	180–200°C	50–70°C	✗	✗	✗	50°C / 6h	65	50	–	26	–	0.9	–	1.3	✗	✗	✗	✗	✓	📄
PLAGEO PLA	3DTomorrow ↗	1.75	185–225°C	50–60°C	✗	✗	✗	–	–	–	57	64	–	–	2.9	1.24	✗	✗	✗	✗	✓	📄
PLAGLOWJet	Filament PM ↗	1.75	200–220°C	60°C	✗	✗	✗	–	55	55	–	–	–	–	–	1.24	✗	✗	✗	–	✓	📄
PLAGRAFYLON 3D	FILOALFA ↗	1.75	230°C	40°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAGalaxy PLA	ERYONE ↗	1.75	190°C	55–70°C	✗	–	–	70°C / 12h	54	53	63	54.2/27.8XY/Z	–	2.1/1.9XY/Z	–	1.23	✗	✗	✗	–	✓	📄
PLAGlow in Dark	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAGlow in Dark PLA	Sovol ↗	1.75	210–230°C	45–60°C	–	–	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLAGlow in the Dark PLA	ERYONE ↗	1.75	180°C	55–70°C	✗	–	–	70°C / 12h	54	–	–	43.2/25.6XY/Z	–	1.7/1.4XY/Z	–	1.25	✗	✗	✗	–	✓	📄
PLAGlow-in-Dark PLA	Snapmaker ↗	1.75	190–230°C	25–60°C	✗	✗	✗	–	63	–	61	46.6	85.1	–	2.1	–	✗	✗	✗	✗	✓	–
PLAGlow-in-Dark PLA	Tronxy ↗	1.75	190–230°C	0–60°C	✗	✗	✗	–	–	–	–	60	–	–	–	1.25	✗	✗	✗	✗	~	–
PLAGreenTEC	Extrudr ↗	1.75	200–230°C	20–90°C	✗	–	✗	–	115	–	–	46	–	14	19	1.3	✗	✗	✗	–	✓	📄
PLAGreenTEC Pro	Extrudr ↗	1.75	210–230°C	20–90°C	✗	–	✗	–	160	115	–	58	–	–	4	1.35	✗	✗	✗	–	✓	📄
PLAGreenyht	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	–	–	52	–	4.7	–	1.54	✗	✗	✗	✗	✓	📄
PLAGreenypro	Spectrum Filaments ↗	1.75	190–240°C	0–50°C	✗	✗	✗	–	160	84	–	53	–	2.2	45	1.34	✗	✗	✗	✗	✓	📄
PLAHFPLA	Protopasta ↗	1.75	200–220°C	45°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHIS PLA	Print-Me ↗	1.75	210–250°C	40–60°C	✗	✗	✗	–	–	90	–	–	–	–	6.1	1.17	✗	✗	✗	✗	✓	–
PLAHS PLA	Kingroon ↗	1.75	210–250°C	50–70°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAHS PLA Clear	Fiberlogy ↗	1.75	220–250°C	60°C	✗	✗	✗	50°C / 4h	–	60	60	50	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAHS PLA Marble	JAYO ↗	1.75	190–260°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHS PLA Matte	JAYO ↗	1.75	230–260°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHS PLA+	JAYO ↗	1.75	190–260°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHS-PLA	Geeetech ↗	1.75	185–230°C	25–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHT-PLA	add:north ↗	1.75	215–225°C	55–65°C	✗	✗	✗	55°C / 4h	–	90	60	50	120	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAHT-PLA	add:north ↗	2.85	215–225°C	55–65°C	✗	✗	✗	55°C / 4h	–	90	60	50	120	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAHTPLA	Protopasta ↗	2.85	195–230°C	50–70°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHTPLA	Protopasta ↗	1.75	195–230°C	50–70°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHardTech Stone	Print-Me ↗	1.75	260–280°C	60–80°C	✗	✓	✗	–	–	–	–	–	1134	–	2.1	1.19	✗	✗	✗	✗	✓	–
PLAHemp PLA	3D4Makers ↗	2.85	190–220°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHemp PLA	3D4Makers ↗	1.75	190–220°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHigh Gloss PLA	FormFutura ↗	1.75	210–240°C	40–60°C	✗	✗	✗	–	–	50	57	45	72	10	–	1.22	✗	✗	✗	✗	✓	📄
PLAHigh Heat+Tough PLA	Push Plastic ↗	2.85	195–230°C	50–70°C	✗	✗	✗	45°C / 4h	–	95.3	–	43.7	71.8	6.79	–	1.22	✗	✗	✗	✗	✓	📄
PLAHigh Heat+Tough PLA	Push Plastic ↗	1.75	195–230°C	50–70°C	✗	✗	✗	45°C / 4h	–	95.3	–	43.7	71.8	6.79	–	1.22	✗	✗	✗	✗	✓	📄
PLAHigh Speed PLA	Sunlu ↗	1.75	200–240°C	50–65°C	✗	✗	✗	50°C / ?h	54	57.3	67.2	54/–XY/Z	75	13	5.9/–XY/Z	1.26	✗	✗	✗	✗	✓	📄
PLAHigh Speed PLA Marble	Sunlu ↗	1.75	200–240°C	50–65°C	–	–	✗	50°C / ?h	54	54.8	63	41/–XY/Z	70	80	11/7.2XY/Z	1.25	✗	✗	✗	–	✓	📄
PLAHolzfilament	purefil ↗	1.75	190–230°C	50°C	–	–	–	60°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLAHuracan Pla	Spectrum Filaments ↗	1.75	200–250°C	30–60°C	✗	✗	✗	–	–	80	57.5	42	75	–	–	1.22	✗	✗	✗	✗	✓	📄
PLAHyper Lightweight PLA	Creality ↗	1.75	190–270°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHyper Luminous PLA	Creality ↗	1.75	190–230°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHyper PLA	Creality ↗	1.75	190–230°C	25–60°C	✗	✗	✗	–	–	–	–	52.991	92.381	6.304	8.8344	1.25	✗	✗	✗	✗	✓	–
PLAHyper PLA RFID	Creality ↗	1.75	190–220°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHyper PLA RFID Stardust	Creality ↗	1.75	190–220°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAHyper Rainbow PLA	Creality ↗	1.75	190–230°C	25–60°C	✗	✗	✗	–	–	–	–	44.37	74.345	10.73	–	1.25	✗	✗	✗	✗	✓	–
PLAHyper Speed PLA	3DPower ↗	1.75	195–240°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAImpact PLA	Fiberlogy ↗	1.75	220–245°C	50–70°C	✗	✗	✗	50°C / 4h	–	80	58	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLAIron HTPLA	Protopasta ↗	1.75	195–230°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLALUMBER	Ooznest ↗	1.75	190–210°C	35–60°C	–	–	–	–	45	–	–	–	–	–	7	1.2	✗	✗	✗	–	✓	📄
PLALW-PLA	colorFabb ↗	1.75	195–260°C	50–60°C	✗	–	✗	–	–	60	55	43	–	8.1	3.7	1.21	✗	✗	✗	✗	✓	📄
PLALW-PLA	purefil ↗	1.75	200–260°C	50–70°C	–	–	–	80°C / 4h	60	55	–	28	–	–	–	0.35	✗	✗	✗	–	✓	–
PLALW-PLA HT	colorFabb ↗	1.75	195–240°C	50–60°C	✗	–	✗	–	–	72	–	35	–	3	2.6	1.21	✗	✗	✗	✗	✓	📄
PLALight weight	Filament PM ↗	1.75	240–260°C	60°C	–	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLALithophane PLA	American Filament ↗	1.75	–	–	–	–	–	–	–	–	57.5	–	–	–	–	1.24	✗	✗	✗	–	!	–
PLALucent PLA	Print-Me ↗	1.75	205–240°C	–	✗	✗	✗	–	–	80	–	–	–	–	3.1	1.15	✗	✗	✗	✗	✓	–
PLALumberLay	Azure Film ↗	1.75	220°C	60°C	✗	✗	✗	–	–	87	–	25.8	50.3	–	19.7	0.97	✗	✗	✗	✗	✓	📄
PLALumberLay Cork	Azure Film ↗	1.75	220°C	60°C	✗	✗	✗	–	–	85	–	25.6	50.5	–	19.5	0.95	✗	✗	✗	✗	✓	📄
PLALuminous Pla Rainbow	eSUN ↗	1.75	210–230°C	45–60°C	✗	✓	✗	–	–	53	–	72	90	11.8	–	1.2	✗	✗	✗	✗	✓	📄
PLALw Pla Ultrafoam	Spectrum Filaments ↗	1.75	190–250°C	0–50°C	✗	✗	✓	50°C / 6h	–	55	–	51	78	7.2	–	0.37	✗	✗	✗	✗	✓	📄
PLAMARBLEJet	Filament PM ↗	1.75	200–220°C	60°C	–	✗	–	–	55	55	–	–	–	–	16	1.24	✗	✗	✗	–	✓	📄
PLAMH Build Series High Speed PLA	MatterHackers ↗	1.75	190–230°C	40–60°C	✗	✗	✗	–	–	–	–	59	84	–	–	1.21	✗	✗	✗	✗	✓	📄
PLAMH Build Series PLA	MatterHackers ↗	1.75	190–220°C	60°C	✗	✗	✗	–	–	56	–	–	97	8	–	1.25	✗	✗	✗	✗	✓	📄
PLAMH Build Series PLA	MatterHackers ↗	2.85	190–220°C	60°C	✗	✗	✗	–	–	56	–	–	97	8	–	1.25	✗	✗	✗	✗	✓	📄
PLAMH Build Series Tough PLA	MatterHackers ↗	1.75	195–230°C	70–90°C	✗	✗	✗	–	–	–	–	34.3	43	–	–	1.25	✗	✗	✗	✗	✓	📄
PLAMarble PLA	ERYONE ↗	1.75	200°C	55–70°C	✗	–	–	70°C / 12h	57	53	–	53.8/22.8XY/Z	–	2.1/1.7XY/Z	–	1.25	✗	✗	✗	–	✓	📄
PLAMasterCore PLA	3DTomorrow ↗	1.75	205–235°C	50°C	✗	✗	✗	–	–	–	60	48.2	–	21.2	20.8	1.24	✗	✗	✗	✗	✓	📄
PLAMatt PLA	FormFutura ↗	1.75	215–235°C	50–60°C	✗	✗	✗	–	57	–	–	46	–	–	3	1.38	✗	✗	✗	✗	✓	📄
PLAMatte Fiber HTPLA	Protopasta ↗	1.75	200–220°C	55°C	✗	✗	✗	–	–	–	60	–	–	–	–	1.14	✗	✗	✗	✗	~	📄
PLAMatte PLA	Fiberlogy ↗	1.75	200–230°C	60°C	✗	✗	✗	50°C / 4h	–	55	57.5	41	48	4	–	1.24	✗	✗	✗	✗	✓	📄
PLAMatte PLA	ERYONE ↗	1.75	190°C	55–70°C	✗	–	–	70°C / 12h	54	55	–	34.2/11XY/Z	–	4.1/2.3XY/Z	–	1.25	✗	✗	✗	–	✓	📄
PLAMatte PLA	Overture3D ↗	1.75	190–230°C	50–70°C	✗	✗	✗	50°C / 7h	62.9	–	–	–/10.9XY/Z	40.1	29.2	5.7	1.3	✗	✗	✗	✗	✓	📄
PLAMatte PLA	Snapmaker ↗	1.75	190–230°C	25–60°C	✗	✗	✗	55°C / 6h	62.7	52	60.6	23.2	40.4	27.8	6.7	1.31	✗	✗	✗	✗	✓	–
PLAMatte PLA High-Speed	ERYONE ↗	1.75	190°C	55–70°C	✗	–	–	70°C / 12h	54	55	–	32.7/8.7XY/Z	–	1.2/1XY/Z	–	1.25	✗	✗	✗	–	✓	📄
PLANonoilen	Fillamentum ↗	1.75	175–195°C	0–50°C	✗	✗	✗	65°C / 2h	150	119	–	38.6	–	7.7	2.4	1.2	✗	✗	✗	✗	✓	📄
PLAPEARL	Extrudr ↗	1.75	140–210°C	20–60°C	✗	–	–	–	58	51	–	34	30.1	–	–	1.25	✗	✗	✗	–	✓	📄
PLAPLA	JAYO ↗	1.75	210–235°C	55–65°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	SWISSFIL ↗	1.75	190–220°C	50–70°C	✗	✗	✗	80°C / 3h	–	55	–	60	–	100	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Keene Village Plastics ↗	2.85	195–215°C	60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA	RE3D ↗	1.75	190–210°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	3DQF ↗	1.75	210–270°C	50–60°C	✗	✗	✗	40°C / 6h	–	55	57.5	60	83	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Aurapol ↗	2.85	210–230°C	0–60°C	✗	✗	✗	50°C / 6h	–	58	60	50	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Hatchbox ↗	1.75	190–220°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Aurapol ↗	1.75	210–230°C	0–60°C	✗	✗	✗	50°C / 5h	–	58	60	50	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	purefil ↗	2.85	190–230°C	50–70°C	✗	✗	✗	80°C / 4h	65	55	–	60	–	3	3.2	1.24	✗	✗	✗	✗	✓	–
PLAPLA	BCN3D ↗	2.85	190–220°C	65°C	✗	✗	✗	–	60	–	57	70	–	20	3.4	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	UltiMaker ↗	2.85	210–215°C	60°C	✗	✗	✗	–	64.5	58.8	59.1	45.5	96.8	7.8	3.9	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Bavaria Filaments ↗	1.75	195–235°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Bavaria Filaments ↗	2.85	180–220°C	50–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	BIQU ↗	1.75	190–220°C	0–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Qidi Tech ↗	1.75	210–230°C	50–60°C	✗	✗	–	–	59.6/60XY/Z	54.8/52.4XY/Z	65.5	36.82/32.46XY/Z	61.29/41.38XY/Z	5.36/1.52XY/Z	17.84/7.23XY/Z	1.17	✗	✗	✗	✗	✓	📄
PLAPLA	SWISSFIL ↗	2.85	190–220°C	50–70°C	–	–	–	80°C / 3h	–	55	–	60	–	100	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	3D4Makers ↗	2.85	180–220°C	20–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	📄
PLAPLA	Printalot ↗	1.75	180–230°C	20–60°C	✗	✗	✗	–	60	–	60	–	–	–	–	1.24	✗	✗	✗	✗	✓	–
PLAPLA	Printalot ↗	2.85	180–230°C	20–60°C	✗	✗	✗	–	60	–	60	–	–	–	–	1.24	✗	✗	✗	✗	✓	–
PLAPLA	Tronxy ↗	1.75	190–230°C	0–60°C	✗	✗	✗	–	–	–	–	60	–	–	–	1.25	✗	✗	✗	✗	~	–
PLAPLA	Push Plastic ↗	1.75	190–220°C	–	✗	✗	✗	45°C / 4h	–	54	–	51	99	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Ooznest ↗	1.75	195–215°C	35–60°C	–	–	–	–	60	–	57	70	–	20	3.4	1.24	✗	✗	✗	–	✓	📄
PLAPLA	FILOALFA ↗	1.75	170–210°C	0–50°C	✗	✗	✗	–	57.5	55	–	53	–	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Filament PM ↗	1.75	200–220°C	20–60°C	✗	✗	✗	–	55	55	–	–	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Overture3D ↗	1.75	190–220°C	25–60°C	✗	✗	✗	50°C / 7h	64.2	–	–	–/38.9XY/Z	84.9	5.1	3.1	1.21	✗	✗	✗	✗	✓	📄
PLAPLA	Francofil ↗	1.75	190–230°C	40–60°C	✗	✗	✗	–	–	–	57.5	51	100	2.5	2.6	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	3D Fila ↗	1.75	190–240°C	0–60°C	✗	✗	✗	–	–	–	54	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Geeetech ↗	1.75	185–215°C	25–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Francofil ↗	2.85	190–230°C	40–60°C	✗	✗	✗	–	–	–	57.5	51	100	2.5	2.6	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Recreus ↗	2.85	200–215°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA	Recreus ↗	1.75	200–215°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA	ERYONE ↗	1.75	190–220°C	50–75°C	✗	–	✗	70°C / 12h	54	53	62	57.3/28.4XY/Z	–	2.2/1.8XY/Z	–	1.24	✗	✗	✗	–	✓	📄
PLAPLA	Kingroon ↗	1.75	190–230°C	50–70°C	✗	✗	✗	45°C / 4h	58	52	–	62	86	5	–	1.24	✗	✗	✗	✗	✓	–
PLAPLA	Material4Print ↗	1.75	200–230°C	40–60°C	✗	✗	✗	–	–	57.5	–	60	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Das Filament ↗	1.75	205–230°C	60–65°C	✗	✗	✗	–	–	–	57.5	60	–	–	–	1.24	✗	✗	✗	✗	✓	–
PLAPLA	Abaflex ↗	1.75	195–235°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	3DQF ↗	2.85	210–270°C	50–60°C	✗	✗	✗	40°C / 6h	–	55	57.5	60	83	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Atomic Filament ↗	1.75	190–230°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Prusament ↗	1.75	200–220°C	40–60°C	✗	✗	✗	–	–	55	57.5	51/59XY/Z	83/99XY/Z	2.9/3.2XY/Z	13/14XY/Z	1.24	✗	✗	✗	✗	✓	–
PLAPLA	Tronxy ↗	2.85	190–230°C	0–60°C	✗	✗	✗	–	–	–	–	60	–	–	–	1.25	✗	✗	✗	✗	~	–
PLAPLA	Keene Village Plastics ↗	1.75	195–215°C	60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA	Push Plastic ↗	2.85	190–220°C	–	✗	✗	✗	45°C / 4h	–	–	–	51	99	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Sunlu ↗	1.75	200–230°C	50–65°C	✗	✗	✗	50°C / ?h	54	55	63	40/–XY/Z	65	10	5/4.5XY/Z	1.23	✗	✗	✗	✗	✓	📄
PLAPLA	C-TECH ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	purefil ↗	1.75	190–230°C	50–70°C	✗	✗	✗	80°C / 4h	65	55	–	60	–	3	3.2	1.24	✗	✗	✗	✗	✓	–
PLAPLA	Filament PM ↗	2.85	200–220°C	20–60°C	✗	✗	✗	–	55	55	–	–	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Atomic Filament ↗	2.85	190–230°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Devil Design ↗	1.75	200–235°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	160	2.5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Gembird ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	50	–	45	–	–	5	1.25	✗	✗	✗	✗	✓	–
PLAPLA	Das Filament ↗	2.85	205–230°C	50–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	CR-3D ↗	1.75	215°C	60°C	✗	✗	✗	–	–	60	–	–	–	50	5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA	Sovol ↗	1.75	190–210°C	45–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	PrintWithSmile ↗	1.75	190–230°C	60–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	Filacraft ↗	1.75	210–230°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA	3D4Makers ↗	1.75	180–220°C	20–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	📄
PLAPLA 2,85	Filament PM ↗	2.85	200–220°C	20–60°C	✗	✗	✗	–	55	55	–	–	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA 607	Nebula Filaments ↗	1.75	210–230°C	0–50°C	✗	✗	✗	45°C / 4h	–	85	57.5	40	–	2.3	–	1.22	✗	✗	✗	✗	✓	📄
PLAPLA 607	Nebula Filaments ↗	2.85	210–230°C	0–50°C	✗	✗	✗	45°C / 4h	–	85	57.5	40	–	2.3	–	1.22	✗	✗	✗	✗	✓	📄
PLAPLA 609 HD	Nebula Filaments ↗	1.75	210–240°C	0–50°C	✗	✗	✗	45°C / 4h	–	82.5	57.5	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLAPLA 609 HD	Nebula Filaments ↗	2.85	210–240°C	0–50°C	✗	✗	✗	45°C / 4h	–	82.5	57.5	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLAPLA Aero	Bambu Lab ↗	1.75	210–260°C	35–45°C	✗	✗	✗	55°C / 8h	54	–	55	24/18XY/Z	45/17XY/Z	2.6/1.2XY/Z	8.2/3.1XY/Z	1.21	✗	✗	✗	✗	✓	📄
PLAPLA Basic	Extrudr ↗	1.75	200–230°C	20–60°C	✗	–	✗	–	–	55	–	–	–	6	–	1.24	✗	✗	✗	–	✓	📄
PLAPLA Basic	Anycubic ↗	1.75	190–230°C	55–65°C	✗	✗	✗	50°C / 8h	55	54	61.2	48	90	8	22	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Basic	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	50°C / 8h	57	54	60	35/31XY/Z	76/59XY/Z	12.2/7.5XY/Z	7.9/13.8XY/Z	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Basic CMYK	Extrudr ↗	1.75	200–230°C	20–60°C	✗	–	✗	–	–	55	–	–	–	6	–	1.24	✗	✗	✗	–	✓	📄
PLAPLA Basic Gradient	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	55°C / 8h	57	–	60	36/32XY/Z	73/68XY/Z	15.2/8.3XY/Z	20.3/23.8XY/Z	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Blaster	Filamentree EU ↗	1.75	230–240°C	40–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Blend	Prusament ↗	1.75	200–220°C	40–60°C	✗	✗	✗	–	–	52.5	–	32/42XY/Z	47/60XY/Z	3/3.5XY/Z	13/15XY/Z	1.24	✗	✗	✗	✗	✓	–
PLAPLA Bois	Nanovia ↗	1.75	210–230°C	60–70°C	✗	✗	✗	–	–	–	52	–	–	–	–	1.13	✗	✗	✗	–	~	–
PLAPLA Carbon	Gembird ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	56	–	66	–	–	5	1.24	✗	✗	✗	✗	✓	–
PLAPLA Conductive	AMOLEN ↗	1.75	–	–	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	!	–
PLAPLA Crystal Clear	Fillamentum ↗	1.75	210–230°C	50–60°C	✗	✗	✗	–	–	60	57.5	50	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA ECO	3D Fila ↗	1.75	190–235°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA EF 3D850	Nanovia ↗	1.75	190–210°C	50–70°C	✗	✗	✗	–	–	85	57.5	58/48XY/Z	–	2.6/2.4XY/Z	1.18	1.24	✗	✗	✗	–	✓	–
PLAPLA EasyFill	3D Fila ↗	1.75	190–235°C	0–60°C	✗	✗	✗	–	–	–	54	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Economy	colorFabb ↗	1.75	195–220°C	50–60°C	✗	–	✗	–	–	55	55	59.6	98.8	3.7	2.8	1.2	✗	✗	✗	✗	✓	📄
PLAPLA Economy	add:north ↗	1.75	210–220°C	55–65°C	✗	✗	✗	55°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Extra Flexible	Gembird ↗	1.75	220–240°C	30–55°C	✗	✗	✗	–	–	–	–	20	–	415	–	1.23	✓	✗	✗	–	✓	–
PLAPLA Extrafill	Fillamentum ↗	1.75	190–210°C	50–60°C	✗	✗	✗	–	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Flexible	Gembird ↗	1.75	195–220°C	30–55°C	✗	✗	✗	–	–	–	–	9	–	580	–	1.24	✓	✗	✗	–	✓	–
PLAPLA Galaxy	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	55°C / 8h	56	–	52	26/21XY/Z	58/37XY/Z	9.3/7.1XY/Z	17.6/5.8XY/Z	1.19	✗	✗	✗	✗	✓	📄
PLAPLA Glitter	Nebula Filaments ↗	1.75	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Glitter	Nebula Filaments ↗	2.85	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Glow	Printalot ↗	1.75	180–230°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Glow	JAYO ↗	1.75	200–210°C	50–65°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Glow	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	55°C / 8h	56	52/–XY/Z	55	32/26XY/Z	76/55XY/Z	8.6/6.5XY/Z	8.8/19.8XY/Z	1.26	✗	✗	✗	✗	✓	📄
PLAPLA Glow	Printalot ↗	2.85	180–230°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Glowing	Nebula Filaments ↗	1.75	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Glowing	Nebula Filaments ↗	2.85	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA HP	colorFabb ↗	1.75	200–220°C	50–60°C	✗	–	✗	–	–	135	–	53.4	89.2	3.5	2.16	1.43	✗	✗	✗	✗	✓	📄
PLAPLA HS	Tronxy ↗	1.75	220–245°C	0–60°C	✗	✗	✗	–	–	–	–	60	–	–	–	1.25	✗	✗	✗	✗	~	–
PLAPLA HS	Extrudr ↗	1.75	210–240°C	20–60°C	✗	–	✗	–	–	–	60	50	–	–	–	1.24	✗	✗	✗	–	✓	📄
PLAPLA HS	BIQU ↗	1.75	200–240°C	0–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA HS	Tronxy ↗	2.85	220–245°C	0–60°C	✗	✗	✗	–	–	–	–	60	–	–	–	1.25	✗	✗	✗	✗	~	–
PLAPLA HT	3D Fila ↗	1.75	200–240°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA HT110	Aurapol ↗	1.75	210–250°C	40–60°C	✗	✗	✗	60°C / 4h	110	–	–	49	–	–	5	1.35	✗	✗	✗	✗	✓	📄
PLAPLA HT150	3DPower ↗	1.75	180–215°C	0–50°C	✗	✗	✗	60°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA High Speed	Gembird ↗	1.75	210–240°C	50–70°C	✗	✗	✗	–	–	50	–	35	–	–	–	1.25	✗	✗	✗	✗	✓	–
PLAPLA High Speed Pro	colorFabb ↗	1.75	215–225°C	50–60°C	✗	–	✗	–	–	57	20	43.7	71	5.7	27.9	1.21	✗	✗	✗	✗	✓	📄
PLAPLA High-Speed	ERYONE ↗	1.75	190–230°C	35–60°C	✗	–	–	70°C / 12h	54	53	–	33.38/28.76XY/Z	–	14.21/6.06XY/Z	–	1.23	✗	✗	✗	–	✓	📄
PLAPLA Lin	Nanovia ↗	1.75	200–230°C	50–70°C	✗	✗	✗	–	–	85	57.5	37/26XY/Z	–	2.4/2.1XY/Z	–	1.25	✗	✗	✗	–	✓	–
PLAPLA Luminous	Geeetech ↗	1.75	185–215°C	25–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA MAX	Printalot ↗	2.85	180–230°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA MAX	Printalot ↗	1.75	180–230°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Marble	Nebula Filaments ↗	1.75	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Marble	Nebula Filaments ↗	2.85	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Marble	JAYO ↗	1.75	195–230°C	50–70°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Marble	3DPower ↗	1.75	195–220°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Marble	C-TECH ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Marble	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Marble	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	55°C / 8h	57	–	56	33/30XY/Z	75/55XY/Z	6.7/5.3XY/Z	9.5/6.5XY/Z	1.22	✗	✗	✗	✗	✓	📄
PLAPLA Marble	Gembird ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	56	–	66	–	–	5	1.24	✗	✗	✗	✗	✓	–
PLAPLA Matt	purefil ↗	1.75	190–230°C	50–70°C	–	–	–	80°C / 4h	–	55	–	60	–	6	–	1.24	✗	✗	✗	–	✓	–
PLAPLA Matt	SWISSFIL ↗	2.85	190–220°C	50–70°C	–	–	–	80°C / 3h	–	55	–	60	–	100	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Matt	Devil Design ↗	1.75	190–210°C	50–60°C	✗	✗	✗	–	–	–	–	35	–	20	–	1.38	✗	✗	✗	✗	✓	📄
PLAPLA Matte	Elegoo ↗	1.75	190–230°C	35–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Kingroon ↗	1.75	190–235°C	45–65°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Matte	JAYO ↗	1.75	190–235°C	50–80°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Geeetech ↗	1.75	190–220°C	50–70°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Matter3D ↗	1.75	200–225°C	40–65°C	✗	✗	✗	–	–	57.5	–	60	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Hatchbox ↗	1.75	190–220°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	50°C / 8h	63	52	61	30/22XY/Z	53/29XY/Z	14.8/4.8XY/Z	6.3/6.6XY/Z	1.31	✗	✗	✗	✗	✓	📄
PLAPLA Matte	3DPower ↗	1.75	195–220°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte	Gembird ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	50	–	30	–	–	5	1.21	✗	✗	✗	✗	✓	–
PLAPLA Matte	3D Fila ↗	1.75	190–230°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Matte Basic	Qidi Tech ↗	1.75	210–230°C	50–60°C	–	–	–	–	61.1/61.8XY/Z	55/53.8XY/Z	65.4	35.5/32.46XY/Z	63.7/28.3XY/Z	5.3/1.5XY/Z	19.4/2.6XY/Z	1.32	✗	✗	✗	✗	✓	📄
PLAPLA Matte HS	Azure Film ↗	1.75	205–225°C	60°C	✗	✗	✗	–	–	55	–	42.8	81.8	–	6	1.35	✗	✗	✗	✗	✓	📄
PLAPLA Meta	JAYO ↗	1.75	200–240°C	50–80°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Metal	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	55°C / 8h	62	58/–XY/Z	60	34/31XY/Z	66/51XY/Z	14.7/4.5XY/Z	22.3/16.8XY/Z	1.25	✗	✗	✗	✗	✓	📄
PLAPLA Mineral	Fiberlogy ↗	1.75	190–210°C	50–70°C	✗	✗	✗	50°C / 6h	–	48	–	30	–	23	–	1.38	✗	✗	✗	✗	✓	📄
PLAPLA Mystic Green	Nebula Filaments ↗	2.85	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Mystic Green	Nebula Filaments ↗	1.75	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA NX2 MATT	Extrudr ↗	1.75	200–230°C	20–60°C	✗	–	✗	–	60	–	–	47	–	19	7	1.3	✗	✗	✗	–	✓	📄
PLAPLA Original	Azure Film ↗	1.75	200–230°C	50–60°C	✗	✗	✗	–	–	–	–	59	73.6	4.2	10.4	–	✗	✗	✗	✗	✓	📄
PLAPLA Pastel	3DPower ↗	1.75	195–220°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Plus	Filamentree EU ↗	1.75	210–240°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Premium	Nebula Filaments ↗	1.75	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Premium	Aurapol ↗	1.75	210–240°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Premium	Nebula Filaments ↗	2.85	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Prime	Coex3D ↗	1.75	220–240°C	0–60°C	✗	✗	✗	55°C / 3h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Prime	Azure Film ↗	1.75	230°C	60°C	✗	✗	✗	–	–	95	–	27.8	52.3	–	21.5	1.27	✗	✗	✗	✗	✓	📄
PLAPLA Pro	Overture3D ↗	1.75	190–220°C	25–60°C	✗	✗	✗	50°C / 7h	63.9	–	–	–/29.7XY/Z	66.9	5.6	12.8	1.27	✗	✗	✗	✗	✓	📄
PLAPLA Pro	Kingroon ↗	1.75	200–235°C	50–70°C	✗	✗	✗	45°C / 4h	63	58	–	68	98	7	–	1.25	✗	✗	✗	✗	✓	–
PLAPLA Pro	Filamentree EU ↗	1.75	240–280°C	50–80°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Purifier	Recreus ↗	2.85	200–215°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA Purifier	Recreus ↗	1.75	200–215°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA Rainbow	3D Fila ↗	1.75	190–230°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Rapido	Qidi Tech ↗	1.75	200–240°C	35–55°C	✗	✗	–	–	73	59	60	45/27.5XY/Z	76.5/50XY/Z	12.5/4XY/Z	21/9XY/Z	1.22	✗	✗	✗	✗	✓	📄
PLAPLA Rapido Matte	Qidi Tech ↗	1.75	210–230°C	30–60°C	✗	✗	–	–	57	58	60	39	77.5	3	40	1.425	✗	✗	✗	✗	✓	📄
PLAPLA Recycled	Prusament ↗	1.75	200–220°C	40–60°C	✗	✗	✗	–	–	53	–	55	87	2.9	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Regrind	colorFabb ↗	1.75	195–220°C	50–60°C	✗	–	✗	–	–	60	55	59.7	97.6	3.8	2.87	1.2	✗	✗	✗	✗	✓	📄
PLAPLA ST	Devil Design ↗	1.75	200–235°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	160	2.5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Silk	Hatchbox ↗	1.75	190–220°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	Filamentree EU ↗	1.75	210–240°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Silk	Geeetech ↗	1.75	200–230°C	40–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	JAYO ↗	1.75	205–235°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	Printalot ↗	2.85	190–230°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	C-TECH ↗	1.75	210–240°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	purefil ↗	1.75	190–210°C	50–70°C	–	–	–	80°C / 4h	–	62	–	–	–	–	–	1.24	✗	✗	✗	–	~	–
PLAPLA Silk	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	Elegoo ↗	1.75	215–230°C	60–70°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	Nebula Filaments ↗	1.75	200–240°C	40–60°C	✗	✗	✗	45°C / 4h	–	51	57.5	59	72	9	–	1.22	✗	✗	✗	✗	✓	📄
PLAPLA Silk	Matter3D ↗	1.75	200–225°C	40–65°C	–	–	–	–	–	52.5	–	52.5	–	–	–	–	✗	✗	✗	–	~	–
PLAPLA Silk	Nebula Filaments ↗	2.85	200–240°C	40–60°C	✗	✗	✗	45°C / 4h	–	51	57.5	59	72	9	–	1.22	✗	✗	✗	✗	✓	📄
PLAPLA Silk	Gembird ↗	1.75	190–220°C	45–60°C	✗	✗	✗	–	–	50	–	30	–	–	5	1.21	✗	✗	✗	✗	✓	–
PLAPLA Silk	Kingroon ↗	1.75	195–230°C	45–65°C	✗	✗	✗	45°C / 4h	–	50	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Silk	3DPower ↗	1.75	210–240°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	3D Fila ↗	1.75	195–230°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk	Filament Unger ↗	1.75	210–240°C	55–65°C	✗	✗	✗	45°C / 4h	–	52	–	64	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Silk	Azure Film ↗	1.75	210–240°C	70–80°C	✗	✗	✗	–	–	–	–	59	73.6	4.2	10.4	–	✗	✗	✗	✗	✓	📄
PLAPLA Silk	Devil Design ↗	1.75	225–245°C	50–60°C	✗	✗	✗	–	–	–	80	–	–	–	–	1.23	✗	✗	✗	✗	~	📄
PLAPLA Silk	Printalot ↗	1.75	190–230°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk Dual Color	3DPower ↗	1.75	210–240°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk Duo	3D Fila ↗	1.75	195–230°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk Multi-Color	Bambu Lab ↗	1.75	210–240°C	35–45°C	✗	✗	✗	55°C / 8h	56	–	57	27/18XY/Z	66/21XY/Z	3.5/1.7XY/Z	8.2/4.6XY/Z	1.32	✗	✗	✗	✗	✓	📄
PLAPLA Silk Tricolor	3D Fila ↗	1.75	195–230°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Silk+	Bambu Lab ↗	1.75	210–240°C	35–45°C	✗	✗	✗	55°C / 8h	66	56	57	33/25XY/Z	75/30XY/Z	2.8/1.5XY/Z	10.3/8.5XY/Z	1.27	✗	✗	✗	✗	✓	📄
PLAPLA Soft	purefil ↗	1.75	180–220°C	50–70°C	–	–	–	60°C / 4h	–	–	–	25	–	350	–	1.23	✓	✗	✗	–	✓	–
PLAPLA Sparkle	Bambu Lab ↗	1.75	190–230°C	35–45°C	✗	✗	✗	55°C / 8h	57	–	56	39/32XY/Z	75/51XY/Z	11.7/6.8XY/Z	23.2/10.3XY/Z	1.26	✗	✗	✗	✗	✓	📄
PLAPLA Special Fill	colorFabb ↗	1.75	210–230°C	50–60°C	✗	–	✗	–	60	53	55	26.9	51.2	4	3.38	1.18	✗	✗	✗	✗	✓	📄
PLAPLA Standard	Coex3D ↗	1.75	220–240°C	0–60°C	✗	✗	✗	55°C / 3h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA Stone	Printalot ↗	1.75	190–225°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Stone	Printalot ↗	2.85	190–225°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Strongman	Azure Film ↗	1.75	200–230°C	50–60°C	✗	✗	✗	–	–	–	–	41.2	52.3	8.9	21.8	–	✗	✗	✗	✗	✓	📄
PLAPLA Thermoaktiv	Nebula Filaments ↗	1.75	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Thermoaktiv	Nebula Filaments ↗	2.85	190–240°C	0–60°C	✗	✗	✗	45°C / 4h	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Tough	Filamentive ↗	1.75	200–220°C	50–60°C	✗	✗	✗	60°C / 2h	–	–	62.5	46	–	27	29.8	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Tough+	Bambu Lab ↗	1.75	220–250°C	35–65°C	✗	✗	✗	55°C / 8h	62	58/–XY/Z	61	34.9/20.9XY/Z	65/54XY/Z	9.4/9.3XY/Z	72.3/18.6XY/Z	1.21	✗	✗	✗	✗	✓	📄
PLAPLA Translucent	Bambu Lab ↗	1.75	200–240°C	35–65°C	✗	✗	✗	50°C / 8h	61	55/–XY/Z	54	55.4/28.9XY/Z	85/42XY/Z	11/9.6XY/Z	6.7/8.5XY/Z	1.22	✗	✗	✗	✗	✓	📄
PLAPLA VX	Nanovia ↗	1.75	200–215°C	60–70°C	✗	✗	✗	–	–	85	57.5	50	–	3.3	1.8	1.24	✗	✗	✗	–	✓	–
PLAPLA Vibers	colorFabb ↗	1.75	195–220°C	50–60°C	✗	–	✗	–	–	–	55	36.8	65	5	3.05	1.24	✗	✗	✗	✗	✓	📄
PLAPLA Wood	AMOLEN ↗	1.75	190–220°C	0–60°C	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLAPLA Wood	Bambu Lab ↗	1.75	190–240°C	35–45°C	✗	✗	✗	55°C / 8h	64	–	54	26/15XY/Z	55/28XY/Z	15.3/4.5XY/Z	6.3/5.6XY/Z	1.21	✗	✗	✗	✗	✓	📄
PLAPLA Wood	Qidi Tech ↗	1.75	190–220°C	30–60°C	✗	✗	–	–	58	57	60	26.5/–XY/Z	52.5/–XY/Z	9/–XY/Z	13.5/–XY/Z	1.23	✗	✗	✗	✗	✓	📄
PLAPLA Wood	add:north ↗	2.85	200–230°C	50–60°C	✗	✗	✗	55°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	SWISSFIL ↗	2.85	–	–	–	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	!	–
PLAPLA Wood	add:north ↗	1.75	200–230°C	50–60°C	✗	✗	✗	55°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	JAYO ↗	1.75	195–260°C	60–65°C	✗	✓	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	3D Fila ↗	1.75	190–220°C	45–60°C	✗	✗	✗	–	–	53	54	37	48	13	–	1.225	✗	✗	✗	✗	✓	–
PLAPLA Wood	Hatchbox ↗	1.75	180–220°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	Geeetech ↗	1.75	190–230°C	50–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	C-TECH ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	Gembird ↗	1.75	190–220°C	50–60°C	✗	✗	✗	–	–	62	–	55	–	–	–	1.21	✗	✗	✗	✗	✓	–
PLAPLA Wood	Printalot ↗	1.75	180–210°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	Aurapol ↗	1.75	210–240°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood	SWISSFIL ↗	1.75	–	–	–	✗	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	!	–
PLAPLA Wood	Matter3D ↗	1.75	200–225°C	40–65°C	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLAPLA Wood	Printalot ↗	2.85	180–210°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA Wood Cork Glitter	Azure Film ↗	1.75	200–230°C	0–60°C	✗	✗	✗	–	–	–	–	39	–	18	60	–	✗	✗	✗	✗	✓	📄
PLAPLA XRS	Nanovia ↗	1.75	210–240°C	50–70°C	✗	✗	✗	–	–	–	57.5	–	–	3.5	1.8	1.66	✗	✗	✗	–	✓	–
PLAPLA+	Sunlu ↗	1.75	200–230°C	50–65°C	✗	✗	✗	50°C / ?h	54	53	61	64/–XY/Z	86	17	3.5/–XY/Z	1.23	✗	✗	✗	✗	✓	📄
PLAPLA+	American Filament ↗	1.75	205–220°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	57.5	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA+	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA+	Numakers ↗	2.85	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA+	Kingroon ↗	1.75	195–235°C	50–70°C	✗	✗	✗	45°C / 4h	60	55	–	65	92	8	–	1.24	✗	✗	✗	✗	✓	–
PLAPLA+	3DQF ↗	2.85	220–270°C	50–60°C	–	–	–	40°C / 6h	–	–	57.5	51	–	–	–	1.24	✗	✗	✗	–	✓	📄
PLAPLA+	JAYO ↗	1.75	210–235°C	55–65°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLAPLA+	VoxelPLA ↗	1.75	200–210°C	45–60°C	✗	✗	✗	–	–	53	–	47	95	7	–	1.23	✗	✗	✗	✗	✓	📄
PLAPLA+	3DQF ↗	1.75	220–270°C	50–60°C	✗	✗	✗	40°C / 6h	–	–	57.5	51	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLA+	Filament Unger ↗	1.75	195–235°C	55–65°C	✗	✗	✗	45°C / 4h	–	–	60	–	–	–	118	1.28	✗	✗	✗	✗	✓	📄
PLAPLA+	Elegoo ↗	1.75	190–230°C	35–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA+	Gembird ↗	1.75	195–235°C	50–70°C	✗	✗	✗	–	–	47	–	72	–	–	12	1.25	✗	✗	✗	✗	✓	–
PLAPLA+	ERYONE ↗	1.75	190°C	55–70°C	✗	–	✗	70°C / 12h	54	53	–	51.5/14XY/Z	–	1.8/1.5XY/Z	–	1.23	✗	✗	✗	–	✓	📄
PLAPLA+	Filament PM ↗	1.75	190–210°C	20–60°C	✗	✗	✗	–	55	55	–	–	–	–	64.5	1.25	✗	✗	✗	✗	✓	–
PLAPLA+	Anycubic ↗	1.75	190–230°C	55–65°C	✗	✗	✗	48°C / 7h	52	50	54.2	45	82	12	28	1.21	✗	✗	✗	✗	✓	📄
PLAPLA+ High-Speed	ERYONE ↗	1.75	190–230°C	35–60°C	✗	–	–	70°C / 12h	54	53	–	33.38/28.76XY/Z	–	14.21/6.06XY/Z	–	1.23	✗	✗	✗	–	✓	📄
PLAPLA+Silk	Coex3D ↗	1.75	220–240°C	0–60°C	✗	✗	✗	55°C / 3h	–	–	–	–	–	–	–	1.23	✗	✗	✗	✗	~	–
PLAPLA-ESD	purefil ↗	1.75	180–220°C	50–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✓	✗	~	–
PLAPLA-HF	Mingda ↗	2.85	200–220°C	40–60°C	✗	✗	✗	50°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPLA-HF	Mingda ↗	1.75	200–220°C	40–60°C	✗	✗	✗	50°C / 4h	–	50	–	65	–	5	–	1.25	✗	✗	✗	✗	✓	📄
PLAPLA-HI	CREAMELT ↗	1.75	200–220°C	50–60°C	✗	✗	✗	–	–	–	57	40	–	11	80	1.24	✗	✗	✗	✗	✓	📄
PLAPLA-HR	BIQU ↗	1.75	220–240°C	35–75°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA-LW	Recreus ↗	1.75	235–250°C	55–60°C	✗	✗	✓	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLAPLA-Metal	Qidi Tech ↗	1.75	190–220°C	30–60°C	✗	✗	–	–	62	58	60	31.5	55	8	30	1.2	✗	✗	✗	✗	✓	📄
PLAPLA-Pro	Polymaker ↗	1.75	210–230°C	30–60°C	✗	✗	✗	55°C / 6h	63.5	55.6	58.3	–/25.39XY/Z	62.12	16.57	20.76	1.237	✗	✗	✗	✗	✓	📄
PLAPLA-R Recycled	purefil ↗	1.75	190–230°C	50–70°C	–	–	–	80°C / 4h	–	55	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLAPLA-SILK	Qidi Tech ↗	1.75	210–230°C	30–60°C	✗	✗	–	–	60	53	60	32	60	30	19.5	1.24	✗	✗	✗	✗	✓	📄
PLAPLA-Stik	Nordic Extrusion ↗	2.85	205–235°C	45–60°C	✗	✗	✗	–	–	55	–	53	–	6	16	1.24	✗	✗	✗	✗	✓	📄
PLAPLA-Stik	Nordic Extrusion ↗	1.75	205–235°C	45–60°C	✗	✗	✗	–	–	55	–	53	–	6	16	1.24	✗	✗	✗	✗	✓	📄
PLAPLAx	Nobufil ↗	1.75	215–235°C	55–75°C	✗	✗	✗	50°C / 4h	–	54	–	43	87	11	4	1.19	✗	✗	✗	✗	✓	📄
PLAPLLA	3D4Makers ↗	1.75	180–220°C	40–60°C	✗	✗	✗	45°C / 4h	61	57	–	50	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAPLLA	3D4Makers ↗	2.85	180–220°C	40–60°C	✗	✗	✗	45°C / 4h	61	57	–	50	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAPRO Series PLA	MatterHackers ↗	1.75	190–230°C	60–70°C	✗	✗	✗	–	–	–	–	60	83	6	–	–	✗	✗	✗	✗	✓	📄
PLAPRO Series PLA	MatterHackers ↗	2.85	190–230°C	60–70°C	✗	✗	✗	–	–	–	–	60	83	6	–	–	✗	✗	✗	✗	✓	📄
PLAPRO Series Tough PLA	MatterHackers ↗	1.75	190–230°C	60–70°C	✗	✗	✗	–	–	–	–	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLAPRO Series Tough PLA	MatterHackers ↗	2.85	190–230°C	60–70°C	✗	✗	✗	–	–	–	–	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLAPastello Pla	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	53	–	38	–	10	–	1.3	✗	✗	✗	✗	✓	📄
PLAPastelová edice	Filament PM ↗	1.75	190–210°C	20–60°C	✗	✗	✓	–	55	55	–	–	–	–	–	1.25	✗	✗	✗	–	✓	📄
PLAPerformance PLA	Keene Village Plastics ↗	1.75	190–230°C	0–70°C	✗	✗	✗	–	–	144	–	65	126	–	–	–	✗	✗	✗	✗	✓	📄
PLAPerformance PLA	Keene Village Plastics ↗	2.85	190–230°C	0–70°C	✗	✗	✗	–	–	144	–	65	126	–	–	–	✗	✗	✗	✗	✓	📄
PLAPerformance PLA	Matter3D ↗	1.75	200–225°C	40–65°C	–	–	–	–	–	75	–	67.5	–	–	–	–	✗	✗	✗	–	~	–
PLAPla	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	53	–	72	90	11.8	–	1.2	✗	✗	✗	✗	✓	📄
PLAPla Basic	eSUN ↗	1.75	210–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	55/–XY/Z	–	63.95/28.29XY/Z	101.2/40.5XY/Z	4.17/2.41XY/Z	3.09/2.15XY/Z	1.24	✗	✗	✗	✗	✓	📄
PLAPla Basic 250g	eSUN ↗	1.75	–	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	!	📄
PLAPla Cast	eSUN ↗	1.75	5–60°C	5–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPla Clear	eSUN ↗	1.75	5–60°C	5–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPla Clear Rainbow	eSUN ↗	1.75	210–240°C	55°C	✗	✗	✓	60°C / 8h	–	55.3	–	76.85/45.95XY/Z	130.5/79.9XY/Z	4.61/2.68XY/Z	3.54/2.19XY/Z	1.25	✗	✗	✗	✗	✓	📄
PLAPla Crystal	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	60	–	50	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAPla Electrically Conductive	Spectrum Filaments ↗	1.75	210–230°C	40–60°C	✗	✓	✗	50°C / 6h	–	–	–	–	–	11.8	8.7	1.35	✗	✗	✗	✗	✓	📄
PLAPla Esd	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53	83	6	–	1.16	✗	✗	✗	✗	✓	📄
PLAPla Flameguard	Spectrum Filaments ↗	1.75	210–240°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	10	–	1.26	✗	✗	✗	✗	~	📄
PLAPla Glitter	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPla Glow	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPla Hf	eSUN ↗	1.75	210–230°C	45–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPla High Speed	Spectrum Filaments ↗	1.75	185–250°C	0–50°C	✗	✗	✗	–	–	60	–	51	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAPla Luminous	eSUN ↗	1.75	190–230°C	45–60°C	✗	✓	✗	–	–	53	–	72	90	11.8	–	1.2	✗	✗	✗	✗	✓	📄
PLAPla Magic Silk	Spectrum Filaments ↗	1.75	215–240°C	30–60°C	✗	✗	✗	–	–	50	57	–	72	10	–	1.22	✗	✗	✗	✗	✓	📄
PLAPla Matt	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✗	✗	–	85	66	–	30	–	2.9	3.5	1.24	✗	✗	✗	✗	✓	📄
PLAPla Metal Brass	Spectrum Filaments ↗	1.75	190–225°C	30–60°C	✗	✓	✗	–	–	–	–	–	–	–	3.1	2.33	✗	✗	✗	✗	~	📄
PLAPla Metal Bronze	Spectrum Filaments ↗	1.75	195–230°C	40–60°C	✗	✗	✗	–	–	–	–	–	–	–	3.5	2.28	✗	✗	✗	✗	~	📄
PLAPla Metal Cooper	Spectrum Filaments ↗	1.75	195–230°C	40–60°C	✗	✗	✗	–	–	–	–	35	–	–	3.8	2.36	✗	✗	✗	✗	✓	📄
PLAPla Nature	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPla Premium	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPla Pro	Spectrum Filaments ↗	1.75	200–230°C	30–60°C	✗	✗	✗	–	–	80	57.5	40	73	–	3	1.22	✗	✗	✗	✗	✓	📄
PLAPla Pro	eSUN ↗	1.75	210–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	53	–	53.34/31.2XY/Z	81.16/59.8XY/Z	4.11/2.6XY/Z	5.5/2.51XY/Z	1.23	✗	✗	✗	✗	✓	📄
PLAPla Rock	eSUN ↗	1.75	210–230°C	45–60°C	✗	✗	✓	50°C / 8h	–	52.3	–	–/18.08XY/Z	55.8/–XY/Z	–/2.05XY/Z	4.43/–XY/Z	1.25	✗	✗	✗	✗	✓	📄
PLAPla Silk Rainbow	Spectrum Filaments ↗	1.75	215–240°C	30–60°C	✗	✗	✗	–	–	50	57	–	72	10	–	1.22	✗	✗	✗	✗	✓	📄
PLAPla Stone	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPla Thermoactive	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	–	55	58	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPla Tough	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53.2	71.13	15	2.09	1.2	✗	✗	✗	✗	✓	📄
PLAPla Uv Cc	eSUN ↗	1.75	190–230°C	45–60°C	✗	✗	✗	–	–	50.75	–	27.58	72.8	2.88	–	1.25	✗	✗	✗	✗	✓	📄
PLAPolyAir	3DLabPrint ↗	1.75	220–240°C	50–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.24	✗	✗	✗	✗	~	📄
PLAPolyLight	3DLabPrint ↗	1.75	210–250°C	55–60°C	✗	✗	✗	–	–	–	55	–	–	–	–	1.24	✗	✗	✗	✗	~	📄
PLAPolyLite CosPLA	Polymaker ↗	1.75	190–220°C	30–60°C	✗	✗	✗	–	62.7	57.6	62	–/36.5XY/Z	77.9	6.3	17.1	1.22	✗	✗	✗	✗	✓	📄
PLAPolyLite LW-PLA	Polymaker ↗	1.75	190–210°C	25–60°C	✗	✗	✗	55°C / 6h	60.3	50.1	58.7	–/20.8XY/Z	50.2	8.8	2.4	0.9	✗	✗	✗	✗	✓	📄
PLAPolyLite PLA Pro	Polymaker ↗	1.75	190–220°C	30–60°C	✗	✗	✗	55°C / 6h	62.7	57.6	62	–/36.5XY/Z	77.9	6.3	17.1	1.22	✗	✗	✗	✗	✓	📄
PLAPolyMax PLA	Polymaker ↗	1.75	190–230°C	25–60°C	✗	✗	✗	55°C / 6h	62.4	52.3	61	–/32.4XY/Z	62	5.7	38.9	1.21	✗	✗	✗	✗	✓	📄
PLAPolySonic PLA	Polymaker ↗	1.75	190–230°C	30–60°C	✗	✗	✗	55°C / 6h	61	52	59	–/37.3XY/Z	76.5	21.5	6.1	1.23	✗	✗	✗	✗	✓	📄
PLAPolySonic PLA Pro	Polymaker ↗	1.75	190–230°C	30–60°C	✗	✗	✗	55°C / 6h	61	52	61	–/33.6XY/Z	67.5	23.4	22.7	1.23	✗	✗	✗	✗	✓	📄
PLAPolyTerra PLA	Polymaker ↗	1.75	190–230°C	25–60°C	✗	✗	✗	55°C / 6h	62.7	57.8	60.6	–/12.2XY/Z	40.4	27.8	6.7	1.31	✗	✗	✗	✗	✓	📄
PLAHT-PLA	Polymaker ↗	1.75	210–230°C	25–60°C	✗	✗	✗	60°C / 6h	155.2	107.2	59.8	–/18.82XY/Z	74.04	2.8	4.94	1.287	✗	✗	✗	✗	✓	📄
PLAPremium PLA	Raise3D ↗	1.75	190–220°C	40–55°C	✗	✗	✗	–	–	–	61	46.6	85.1	1.9	2.7	1.2	✗	✗	✗	✗	✓	📄
PLAPremium PLA	FormFutura ↗	1.75	185–210°C	50–60°C	✗	✗	✗	–	–	55	60	60	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLAPremium PLA Flame Retardant	FormFutura ↗	1.75	210–240°C	40–60°C	✗	✗	✓	–	–	55	–	36.6	–	9.9	–	1.26	✗	✗	✗	✗	✓	📄
PLAPrimaSelect METAL	PrimaCreator ↗	1.75	195–220°C	35–60°C	✗	✓	✗	–	65	–	–	18.3	–	6.25	–	3.4	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA	PrimaCreator ↗	1.75	190–220°C	30–60°C	✗	✗	✗	–	57	57	60	39	72.5	12.5	27.5	1.24	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Chameleon	PrimaCreator ↗	1.75	205–225°C	35–60°C	✗	✗	✗	–	58.2	–	–	71	–	3.6	2.6	1.24	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Flame Retardant	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	57	55	60	37.5	62.5	3	37	1.29	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Glossy	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPrimaSelect PLA Glow in the Dark	PrimaCreator ↗	1.75	190–220°C	30–60°C	✗	✗	✗	–	58	55	60	42.5	90	8	20	1.23	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Gradient	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	60	53	60	32	60	30	19.5	1.24	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Marble	PrimaCreator ↗	1.75	190–220°C	30–60°C	✗	✗	✗	–	59	59	–	38	63	3	31	1.18	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Matt	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	57	58	60	39	77.5	3	40	1.425	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Metal-Shine	PrimaCreator ↗	1.75	190–220°C	30–60°C	✗	✗	✗	–	62	58	60	31.5	55	8	30	1.2	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Metallic	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAPrimaSelect PLA PRO	PrimaCreator ↗	1.75	210–250°C	45–65°C	✗	✗	✗	–	–	95	–	39	–	58	22	1.27	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Pastel	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	57	58	60	39	77.5	3	40	1.425	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Satin	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✗	✗	–	60	53	60	32	60	30	19.5	1.24	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Sparkle	PrimaCreator ↗	1.75	200–220°C	30–60°C	✗	✗	✗	–	63	59	60	37.5	59.5	12.5	36	1.16	✗	✗	✗	✗	✓	📄
PLAPrimaSelect PLA Tough	PrimaCreator ↗	1.75	210–225°C	60–80°C	✗	✗	✗	–	57	–	–	–/33XY/Z	72	27	29.8	1.21	✗	✗	✗	✗	✓	📄
PLAPrimaSelect WOOD	PrimaCreator ↗	1.75	210–235°C	40–60°C	✗	✗	✗	–	45	–	–	70	–	170	7	1.2	✗	✗	✗	✗	✓	📄
PLAPrimaValue PLA	PrimaCreator ↗	1.75	180–210°C	–	✗	✗	✗	–	60	–	–	9	–	150	4.2	1.24	✗	✗	✗	✗	✓	📄
PLAPrototyping PLA	American Filament ↗	1.75	–	–	–	–	–	–	–	–	57.5	–	–	–	–	1.24	✗	✗	✗	–	!	–
PLAR Pla	Spectrum Filaments ↗	1.75	185–230°C	0–50°C	✗	✗	✗	–	55	–	57.5	53.5	60.7	5.5	–	1.24	✗	✗	✗	✗	✓	📄
PLARainbow Matte PLA	PrintWithSmile ↗	1.75	190–230°C	60–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAReForm - rPLA	FormFutura ↗	1.75	190–215°C	40–60°C	✗	✗	✗	–	55	–	60	53.5	60.7	5.5	–	1.24	✗	✗	✗	✗	✓	📄
PLARePLA	Filament PM ↗	1.75	220–250°C	60–80°C	–	✗	–	–	55	55	–	–	–	–	–	1.24	✗	✗	✗	–	✓	📄
PLARePLA+	Filament PM ↗	1.75	220–250°C	60–80°C	–	✗	–	–	55	55	–	–	–	–	64.5	1.24	✗	✗	✗	–	✓	–
PLARegenerative PLA+	American Filament ↗	1.75	–	–	–	–	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	!	–
PLASILK	Filament PM ↗	1.75	210–250°C	60°C	–	✗	–	–	65	56	–	–	–	–	–	1.24	✗	✗	✗	–	✓	📄
PLASafeguard Pla	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✗	✗	–	–	55	57.5	53	83	6	–	1.24	✗	✗	✗	✗	✓	📄
PLASatin Matt PLA	Print-Me ↗	1.75	180–210°C	40–60°C	✗	✗	✗	–	–	80	–	–	–	–	6.1	1.17	✗	✗	✗	✗	✓	–
PLASelect PLA	3DPower ↗	1.75	195–220°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLASilk Dual-Color PLA	ERYONE ↗	1.75	190–220°C	55–70°C	✗	–	–	55°C / 8h	56	53	63	49.8/11XY/Z	–	1.7/–XY/Z	–	1.32	✗	✗	✗	–	✓	📄
PLASilk PLA	Sovol ↗	1.75	210–230°C	45–60°C	–	–	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLASilk PLA	Snapmaker ↗	1.75	190–240°C	25–70°C	✗	✗	✗	55°C / 6h	64.7	–	58.2	41.1	69.1	40	13.8	1.24	✗	✗	✗	✗	✓	–
PLASilk PLA	American Filament ↗	1.75	205–220°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLASilk PLA	3DTomorrow ↗	1.75	205–225°C	50–60°C	✗	✗	✗	–	–	–	57	64	–	–	–	1.24	✗	✗	✗	✗	✓	📄
PLASilk PLA High-Speed	ERYONE ↗	1.75	190°C	55–70°C	✗	–	–	70°C / 12h	56	50	57	62.7/19.1XY/Z	–	2.3/1.9XY/Z	–	1.32	✗	✗	✗	–	✓	📄
PLASilk PLA Pastel Rainbow	PrintWithSmile ↗	1.75	190–230°C	60–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLASilk PLA Rainbow	PrintWithSmile ↗	1.75	190–230°C	60–65°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLASilk Pla	Spectrum Filaments ↗	1.75	215–240°C	30–60°C	✗	✗	✗	–	–	50	57	45	72	10	–	1.22	✗	✗	✗	✗	✓	📄
PLASilk Rainbow PLA	ERYONE ↗	1.75	190°C	55–70°C	✗	–	–	70°C / 12h	54	53	–	45.1/13.1XY/Z	–	1.4/1.2XY/Z	–	1.23	✗	✗	✗	–	✓	📄
PLASmartFit Natural Fibers	Print-Me ↗	1.75	190–230°C	40–60°C	✗	✗	✗	–	–	70	–	–	–	–	4.1	1.2	✗	✗	✗	✗	✓	–
PLASmartFit PLA	Print-Me ↗	1.75	195–210°C	–	✗	✗	✗	–	–	80	–	–	–	–	3.1	1.15	✗	✗	✗	✗	✓	–
PLASnapSpeed PLA	Snapmaker ↗	1.75	190–230°C	25–60°C	✗	✗	✗	55°C / 6h	61	52	59	46	76.5	21.5	6.1	1.23	✗	✗	✗	✗	✓	–
PLASoleyin Ultra PLA	Creality ↗	1.75	190–220°C	–	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAStainless Steel PLA	Protopasta ↗	1.75	195–220°C	55°C	✗	✓	✗	–	–	–	–	–	–	–	–	2.3	✗	✗	✗	✗	~	📄
PLAStandard PLA+	3D-Fuel ↗	2.85	185–205°C	–	✗	✗	✗	45°C / 4h	–	–	–	41	–	1.8	–	–	✗	✗	✗	✗	~	📄
PLAStandard PLA+	3D-Fuel ↗	1.75	185–205°C	–	✗	✗	✗	45°C / 4h	–	–	–	41	–	1.8	–	–	✗	✗	✗	✗	~	📄
PLAStarlight	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAStatic Dissipative PLA	Protopasta ↗	1.75	210–230°C	60°C	✗	✗	✗	55°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✓	✗	~	📄
PLAStone Effect PLA	3DQF ↗	1.75	210–225°C	30–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLATextura	add:north ↗	1.75	200–210°C	60–70°C	✗	✗	✗	65°C / 4h	–	55	57.5	51	89	2	–	1.25	✗	✗	✗	✗	✓	📄
PLATextura	add:north ↗	2.85	200–210°C	60–70°C	✗	✗	✗	65°C / 4h	–	55	57.5	51	89	2	–	1.25	✗	✗	✗	✗	✓	📄
PLATextura Flare	add:north ↗	1.75	200–210°C	60–70°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLATextura Flare	add:north ↗	2.85	200–210°C	60–70°C	✗	✗	✗	65°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAThe Filament Ht Pla	Spectrum Filaments ↗	1.75	195–220°C	40–50°C	✗	✗	✗	–	140	108	–	44	–	12	2.1	1.2	✗	✗	✗	✗	✓	📄
PLAThe Filament Pla	Spectrum Filaments ↗	1.75	185–225°C	0–50°C	✗	✗	✗	–	–	55	60	45	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAThe Filament Pla Hs	Spectrum Filaments ↗	1.75	185–250°C	0–50°C	✗	✗	✗	–	–	60	–	51	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLAThe Filament Pla Lite	Spectrum Filaments ↗	1.75	195–225°C	40–50°C	✗	✗	✗	–	–	56	–	47	–	5.5	–	1.24	✗	✗	✗	✗	✓	📄
PLAThe Filament Pla Matte	Spectrum Filaments ↗	1.75	195–225°C	0–50°C	✗	✗	✗	–	–	60	–	37	–	9	–	1.29	✗	✗	✗	✗	✓	📄
PLATimberfill	Fillamentum ↗	1.75	150–170°C	50–60°C	✗	✗	✗	–	–	48	–	39	–	2	–	1.26	✗	✗	✗	✗	✓	📄
PLATough PLA	Material4Print ↗	1.75	205–230°C	40–65°C	–	–	–	–	–	75	57.5	40	73	–	–	1.22	✗	✗	✗	–	✓	📄
PLATough PLA	FormFutura ↗	1.75	190–230°C	50–60°C	✓	✗	✗	35°C / 6h	–	55	60	53.2	–	15	2.09	1.2	✗	✗	✗	✗	✓	📄
PLATough PLA	SWISSFIL ↗	2.85	190–220°C	50–70°C	–	–	–	80°C / 3h	–	55	–	40.7	101.4	3.4	19.97	1.22	✗	✗	✗	✗	✓	📄
PLATough Pro PLA+	3D-Fuel ↗	1.75	190–230°C	–	✗	✗	✗	45°C / 4h	–	80	57	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLATough Pro PLA+	American Filament ↗	1.75	205–220°C	45–60°C	✗	✗	✗	–	–	80	57.5	40/24XY/Z	73/46XY/Z	–	–	1.22	✗	✗	✗	✗	✓	📄
PLATough Pro PLA+	3D-Fuel ↗	2.85	190–230°C	–	✗	✗	✗	45°C / 4h	–	80	57	40	73	–	–	1.22	✗	✗	✗	✗	✓	📄
PLATransparent PLA	FormFutura ↗	1.75	190–225°C	45–55°C	✗	✗	✓	45°C / 5h	–	60	60	50	–	5	5	1.24	✗	✗	✗	✗	✓	📄
PLATri-Color Coextrusion PLA	Tronxy ↗	1.75	190–220°C	60–65°C	–	–	–	50°C / 2h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLATri-Color Silk	Numakers ↗	1.75	200–230°C	45–60°C	✗	✗	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAUK PLA	3DTomorrow ↗	1.75	205–235°C	50°C	✗	✗	✗	–	–	–	60	48.2	–	21.2	20.8	1.24	✗	✗	✗	✗	✓	📄
PLAUltrafuse PLA	Forward AM ↗	1.75	210–230°C	50–70°C	✗	✗	✗	–	65	55	61	34.7	98	4.2	2.5	1.252	✗	✗	✗	✗	✓	📄
PLAUltrafuse PLA PRO1	Forward AM ↗	1.75	200–220°C	50–70°C	✗	✗	✗	–	58	56	63	48	92.4	21.9	20.4	1.254	✗	✗	✗	✗	✓	📄
PLAUltrafuse PLA Tough	Forward AM ↗	1.75	200–220°C	50–70°C	✗	✗	✗	–	59	57	62	40	73	7.4	8.6	1.215	✗	✗	✗	✗	✓	📄
PLAVelvet PLA	Fiberlogy ↗	1.75	195–220°C	20–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAVolcano PLA	FormFutura ↗	1.75	220–255°C	0–60°C	✗	✗	✗	–	95	–	–	39	–	58	22	1.27	✗	✗	✗	✗	✓	📄
PLAVolcano PLA 150C	FormFutura ↗	1.75	195–225°C	45–65°C	✗	✗	✗	–	140	110	–	43	–	11	2	1.2	✗	✗	✗	✗	✓	📄
PLAWOODJet	Filament PM ↗	1.75	200–215°C	20–60°C	–	✗	–	–	55	55	–	–	53.1	–	–	1.19	✗	✗	✗	–	✓	📄
PLAWine Stopper Cork PLA	3DQF ↗	1.75	200–220°C	30–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAWood	Spectrum Filaments ↗	1.75	175–200°C	0–50°C	✗	✗	✗	–	–	–	–	47	–	6.5	4.4	1.15	✗	✗	✗	✗	✓	📄
PLAWood	Extrudr ↗	1.75	170–190°C	20–60°C	✗	✓	–	–	48	–	–	40	43	–	–	1.23	✗	✗	✗	–	✓	📄
PLAWood	eSUN ↗	1.75	210–235°C	55–65°C	✗	✗	✓	55°C / 8h	–	50	–	39.71/13.5XY/Z	67.3/23.7XY/Z	5.97/1.97XY/Z	15.92/1.97XY/Z	1.2	✗	✗	✗	✗	✓	📄
PLAWood PLA	3DTomorrow ↗	1.75	200–210°C	50–60°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAWood PLA	Snapmaker ↗	1.75	190–210°C	25–60°C	✗	✗	✗	–	60	–	62	23.2	52.9	–	2.1	–	✗	✗	✗	✗	✓	–
PLAWood PLA	ERYONE ↗	1.75	190°C	55–70°C	✗	✓	–	70°C / 12h	54	54	–	30.1/8.9XY/Z	–	1.2/0.9XY/Z	–	1.1	✗	✗	✗	–	✓	📄
PLAWood PLA	Filamentive ↗	1.75	200–235°C	50–60°C	✗	✓	✗	60°C / 2h	45	–	–	100	–	170	7	1.2	✗	✗	✗	✗	✓	📄
PLAWood PLA	3DPower ↗	1.75	175–200°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAWoodchucker	3DQF ↗	1.75	165–190°C	50–60°C	✗	✗	✗	40°C / 4h	–	–	55	47	64	–	4.4	1.05	✗	✗	✗	✗	✓	📄
PLAWoodfill	Prusament ↗	1.75	185–205°C	50–70°C	✗	✗	✗	–	–	58.2	–	21/23XY/Z	30/37XY/Z	4.3/4.1XY/Z	17/21XY/Z	1.16	✗	✗	✗	✗	✓	📄
PLAX-PLA	add:north ↗	1.75	200–210°C	65–75°C	✗	✗	✗	55°C / 4h	–	60	55	62	52	12	–	1.24	✗	✗	✗	✗	✓	📄
PLAX-PLA	add:north ↗	2.85	200–210°C	65–75°C	✗	✗	✗	55°C / 4h	–	60	55	62	52	12	–	1.24	✗	✗	✗	✗	✓	📄
PLAc-Matte PLA	Protopasta ↗	1.75	200–220°C	45°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLAePLA	Filamentive ↗	1.75	220–240°C	50–60°C	✗	✗	✗	60°C / 2h	–	95	–	40	–	47	23	1.27	✗	✗	✗	✗	✓	📄
PLAecoPLA	3DJAKE ↗	2.85	195–215°C	35–60°C	✗	✗	✗	–	–	–	60	45	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAecoPLA	3DJAKE ↗	1.75	195–215°C	35–60°C	✗	✗	✗	–	–	–	60	45	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAecoPLA Glow	3DJAKE ↗	1.75	195–215°C	35–60°C	✗	✓	✗	–	–	–	60	45	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAecoPLA Glow	3DJAKE ↗	2.85	195–215°C	35–60°C	✗	✓	✗	–	–	–	60	45	–	5	–	1.24	✗	✗	✗	✗	✓	📄
PLAecoPLA Silk	3DJAKE ↗	1.75	210–230°C	35–60°C	✗	✗	✗	–	–	–	–	39.928	–	44.554	3.309	1.224	✗	✗	✗	✗	✓	📄
PLAecoPLA Sparkling	3DJAKE ↗	1.75	210–230°C	35–60°C	✗	✗	✗	–	–	–	–	50.8	–	11.734	2.764	1.227	✗	✗	✗	✗	✓	📄
PLAecoPLA Wood	3DJAKE ↗	1.75	210–230°C	35–60°C	✗	✗	✗	–	–	–	–	24.617	–	23.824	3.244	1.1128	✗	✗	✗	✗	✓	📄
PLAmagicPLA	3DJAKE ↗	1.75	210–230°C	35–60°C	✗	✗	✗	–	–	–	–	45.83	–	20.4	2.856	1.243	✗	✗	✗	✗	✓	📄
PLAmattePLA	3DJAKE ↗	1.75	200–230°C	0–60°C	✗	✗	✗	–	60	–	–	47	–	19	–	1.3	✗	✗	✗	✗	✓	📄
PLAmysteryPLA	3DJAKE ↗	1.75	210–230°C	35–60°C	✗	✗	✗	–	–	–	–	44.763	–	19.951	2.589	1.234	✗	✗	✗	✗	✓	📄
PLAniceBIO	3DJAKE ↗	2.85	200–230°C	0–60°C	✗	✗	✗	–	146	–	–	55	–	2	43	1.33	✗	✗	✗	✗	✓	📄
PLAniceBIO	3DJAKE ↗	1.75	200–230°C	0–60°C	✗	✗	✗	–	146	–	–	55	–	2	43	1.33	✗	✗	✗	✗	✓	📄
PLArPLA	Matter3D ↗	1.75	200–225°C	40–65°C	✗	✗	✗	–	–	52.5	–	52.5	–	–	–	–	✗	✗	✗	✗	~	–
PLArPLA	Prusament ↗	1.75	195–215°C	40–60°C	✗	✗	✓	–	–	–	57.5	–	–	–	–	1.24	✗	✗	✗	✗	~	–
PLArPLA	Filamentive ↗	1.75	185–215°C	0–60°C	✗	✗	✗	–	–	55	57.5	53	83	6	0.016	1.24	✗	✗	✗	✗	✓	📄
PLArPLA	colorFabb ↗	1.75	195–220°C	50–60°C	✗	–	✗	–	–	–	55	–	–	–	–	1.21	✗	✗	✗	✗	~	📄
PLArPLA Matte	Lostboyslab ↗	1.75	215–235°C	40–70°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFCR-PLA Carbon	Creality ↗	1.75	195–230°C	25–60°C	✗	✓	✗	–	–	–	–	49	78	–	7	1.25	✗	✗	✗	✗	✓	–
PLA-CFCarbon Fiber HTPLA	Protopasta ↗	2.85	195–230°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFCarbon Fiber HTPLA	Protopasta ↗	1.75	195–230°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFCarbon PLA	Filamentree EU ↗	1.75	230–260°C	50–70°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFCarbonCore25 PLA	BIQU ↗	1.75	210–230°C	40–60°C	✗	✗	✗	–	65	68.5	–	38	79	5	–	1.19	✗	✗	✗	✗	✓	📄
PLA-CFCarbonX PLA+CF	3DXTech ↗	1.75	215°C	23°C	✗	✓	✗	–	–	91	60	48	89	2	–	1.29	✗	✗	✗	✗	✓	📄
PLA-CFEpla Cf	eSUN ↗	1.75	190–230°C	45–60°C	✗	✓	✗	–	–	53	–	39	103	4.27	–	1.21	✗	✗	✗	✗	✓	📄
PLA-CFGreenTEC Pro CF	Extrudr ↗	1.75	225–250°C	20–90°C	✗	✓	–	–	165	115	–	65	–	2.5	4.6	1.2	✗	✗	✗	–	✓	📄
PLA-CFHyper PLA CF	Creality ↗	1.75	190–230°C	45°C	–	✓	–	–	–	–	–	–	103	–	4.1	–	✗	✗	✗	–	~	–
PLA-CFPLA Basic CF	Extrudr ↗	1.75	200–230°C	20–60°C	✗	✓	✗	–	–	55	–	–	–	6	–	1.24	✗	✗	✗	–	✓	📄
PLA-CFPLA CF	FILOALFA ↗	1.75	170–210°C	0–50°C	✗	✓	✗	–	57.5	55	–	53	–	6	–	1.24	✗	✗	✗	✗	✓	📄
PLA-CFPLA CF	Matter3D ↗	1.75	215–230°C	65°C	✗	✓	✗	48°C / 6h	–	62.5	–	82.5	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA CF	Fiberlogy ↗	1.75	210–230°C	60°C	✗	✓	✗	50°C / 6h	89	137	–	50	–	2.4	3.1	1.26	✗	✗	✗	✗	✓	📄
PLA-CFPLA CF10	purefil ↗	1.75	190–230°C	50–70°C	–	✓	–	80°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLA-CFPLA CF10	CR-3D ↗	1.75	230°C	60°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	📄
PLA-CFPLA Carbon Fiber	AMOLEN ↗	1.75	190–220°C	0–60°C	–	✓	–	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLA-CFPLA UVHT-C15	PrintWithSmile ↗	1.75	190–230°C	60–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	Numakers ↗	1.75	210–230°C	50–60°C	✗	✓	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	ERYONE ↗	1.75	190°C	60–70°C	✗	✓	✗	70°C / 12h	69	54	63	43.5/25.3XY/Z	–	4.5/3.1XY/Z	–	1.24	✗	✗	✗	–	✓	📄
PLA-CFPLA-CF	3D Fila ↗	1.75	200–240°C	50–65°C	✗	✓	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	Anycubic ↗	1.75	210–250°C	55–70°C	✗	✓	✗	53°C / 7h	69	60	–	44	74	10.5	25	1.22	✗	✗	✗	✗	✓	📄
PLA-CFPLA-CF	Elegoo ↗	1.75	210–240°C	30–60°C	✗	✓	✗	55°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	Bambu Lab ↗	1.75	210–240°C	35–45°C	✗	✓	–	55°C / 8h	69	54	63	38/26XY/Z	89/49XY/Z	8.4/3.6XY/Z	7.6/7.8XY/Z	1.22	✗	✗	✗	–	✓	📄
PLA-CFPLA-CF	Sunlu ↗	1.75	210–240°C	50–65°C	✗	✓	✓	55°C / ?h	54	53	59	44.8/–XY/Z	64	4.1	4.1/–XY/Z	1.2	✗	✗	✗	✗	✓	📄
PLA-CFPLA-CF	Geeetech ↗	1.75	190–215°C	40–60°C	✗	✓	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	Kingroon ↗	1.75	200–240°C	50–70°C	✗	✓	✗	45°C / 6h	–	72	–	75	112	3	–	1.28	✗	✗	✗	✗	✓	–
PLA-CFPLA-CF	Qidi Tech ↗	1.75	210–240°C	40–60°C	–	✓	–	50°C / 5h	–	52.6	–	54.92/24.09XY/Z	91.57/–XY/Z	4.9/1.01XY/Z	6.65/–XY/Z	1.25	✗	✗	✗	✗	✓	📄
PLA-CFPLA-CF	Tronxy ↗	1.75	190–200°C	55–65°C	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	Atomic Filament ↗	1.75	210–230°C	–	✗	✓	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLA-CF	C-TECH ↗	1.75	190–220°C	50–60°C	✗	✓	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-CFPLAx-CF	Nobufil ↗	1.75	215–235°C	55–75°C	✗	✓	✗	50°C / 4h	–	54	–	45	92	7	5	1.19	✗	✗	✗	✗	✓	📄
PLA-CFPla Carbon	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✓	✗	–	60	–	–	65	–	0.5	8	1.3	✗	✗	✗	–	✓	📄
PLA-CFPolyLite PLA-CF	Polymaker ↗	1.75	190–220°C	30–60°C	✗	✓	✗	55°C / 6h	64.1	54	61.8	–/15.1XY/Z	51.7	13.2	5.5	1.29	✗	✗	✗	–	✓	📄
PLA-CFPremium PLA CF03	FormFutura ↗	1.75	230–280°C	50–60°C	✗	✓	✓	–	–	55	–	58	–	6	–	1.24	✗	✗	✗	✗	✓	📄
PLA-CFPrimaSelect PLA-CF	PrimaCreator ↗	1.75	210–230°C	30–60°C	✗	✓	✗	–	57	55	60	32.5	92.5	10	26	1.23	✗	✗	✗	✗	✓	📄
PLA-CFPrografen Pla Graphene Light	Spectrum Filaments ↗	1.75	190–240°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLA-CFPrografen Pla Graphene Strong	Spectrum Filaments ↗	1.75	190–240°C	0–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PLA-CFStatic Dissipative Carbon Fiber PLA	Protopasta ↗	1.75	210–230°C	60°C	✗	✓	✗	55°C / 6h	–	–	–	–	–	–	–	–	✗	✗	✓	✗	~	📄
PLA-CFThe Filament Pla Cf	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✓	✗	–	–	55	60	57.5	–	–	3.6	1.25	✗	✗	✗	–	✓	📄
PLA-CFecoPLA CF	3DJAKE ↗	1.75	210–240°C	20–60°C	✗	✓	✗	–	–	–	–	55	–	3.5	5	1.26	✗	✗	✗	✗	✓	📄
PLA-GFEpla Gf	eSUN ↗	1.75	190–230°C	45–60°C	✗	✓	✗	–	–	56	–	59.27	85.01	7.99	–	1.31	✗	✗	✗	✗	✓	📄
PLA-GFPLA-GF	3D Fila ↗	1.75	200–240°C	50–65°C	✗	✓	✗	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PLA-GFPLAx-GF	Nobufil ↗	1.75	215–235°C	55–75°C	✗	✓	✗	50°C / 4h	–	54	–	40	89	12	5	1.2	✗	✗	✗	✗	✓	📄
PLA-GFHT-PLA-GF	Polymaker ↗	1.75	210–230°C	25–60°C	✗	✓	✗	60°C / 6h	148.3	114.7	59.76	–/22.46XY/Z	87.76	2.3	5.31	1.337	✗	✗	✗	–	✓	📄
PMMAPMMA	Push Plastic ↗	1.75	230–250°C	100–120°C	✗	✗	✗	70°C / 4h	–	106	–	47	70	2	–	1.18	✗	✗	✗	–	✓	📄
PMMAPMMA	Push Plastic ↗	2.85	230–250°C	100–120°C	✗	✗	✗	70°C / 4h	–	106	–	47	–	–	–	1.18	✗	✗	✗	–	✓	📄
PMMAPMMA	Material4Print ↗	1.75	240–270°C	90–110°C	✓	–	–	–	–	77	105	35	–	49	–	1.17	✗	✗	✗	✓	✓	📄
POMPOM	purefil ↗	1.75	190–210°C	120–150°C	–	–	–	80°C / 4h	116	100	–	43	–	50	100	1.34	✗	✗	✗	–	✓	–
PPCentaur PP	FormFutura ↗	1.75	245–270°C	80–85°C	✓	✗	✗	55°C / 24h	103	–	–	12	–	600	–	0.89	✗	✗	✗	–	✓	📄
PPOBC	add:north ↗	1.75	185–195°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PPOBC	add:north ↗	2.85	185–195°C	0–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PPPP	UltiMaker ↗	2.85	210–230°C	50–60°C	✗	✗	✗	–	99	64.1	–	10.2	15.3	800	49.1	0.89	✗	✗	✗	–	✓	📄
PPPP	purefil ↗	1.75	200–260°C	70–110°C	–	–	–	–	–	85	–	–	–	–	–	–	✗	✗	✗	–	~	–
PPPP	ERYONE ↗	1.75	220–240°C	60–80°C	✗	–	–	55°C / 8h	–	55	–	23	–	–	–	0.95	✗	✗	✗	–	✓	📄
PPPP	BCN3D ↗	2.85	220–240°C	65–75°C	✓	✗	✗	–	–	–	–	11.9	19.6	200	61	0.9	✗	✗	✗	–	✓	📄
PPPP	Sunlu ↗	1.75	220–250°C	60–100°C	✓	✗	✗	–	–	61	–	22.7/–XY/Z	24	900	40/–XY/Z	0.9	✗	✗	✗	–	✓	📄
PPPP	Fiberlogy ↗	1.75	220–250°C	–	✗	✗	–	50°C / 4h	–	40	–	14	–	–	30	1.05	✗	✗	✗	–	✓	📄
PPPP 2320	Fillamentum ↗	1.75	225–245°C	90–105°C	✗	✗	✗	–	–	–	–	23	–	20	–	0.96	✗	✗	✗	✓	✓	📄
PPPP3D	Recreus ↗	1.75	240–248°C	40–85°C	✓	✗	✓	50°C / 4h	–	–	–	–	–	–	–	–	✗	✓	✗	–	~	📄
PPPPJet	Filament PM ↗	1.75	210–230°C	100–110°C	✓	✗	–	–	81	50	–	8	–	–	–	0.89	✗	✗	✗	–	✓	📄
PPPp	Spectrum Filaments ↗	1.75	245–280°C	80–100°C	✓	✗	✗	–	135	80	–	17	–	500	65	3	✗	✗	✗	–	✓	📄
PPUltrafuse PP	Forward AM ↗	1.75	220–260°C	15–50°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PP-CFLUVOCOM 3F PP CF 9928	FormFutura ↗	1.75	220–250°C	40–80°C	✗	✓	✓	82°C / 3h	80	–	–	54	78	1.2	–	1	✗	✗	✗	–	✓	📄
PP-CFPP CF	FILOALFA ↗	1.75	220–240°C	0–80°C	✓	✓	✗	–	–	130	–	35	138	1.3	5.2	1.22	✗	✗	✗	–	✓	📄
PP-CFPP CF	Nanovia ↗	1.75	235–255°C	80–100°C	✗	✓	–	–	–	88	–	29	–	3.3	3.5	1	✗	✗	✗	–	✓	–
PP-CFPP Carbon Fiber	Prusament ↗	1.75	260–280°C	75–95°C	✗	✓	✓	–	–	115	–	27.3/30.7XY/Z	27.5/41.7XY/Z	3.4/3.2XY/Z	14.5/10.5XY/Z	0.91	✗	✗	✗	–	✓	–
PP-CFPP-CF	ERYONE ↗	1.75	220–240°C	60–80°C	✗	✓	–	55°C / 8h	–	–	–	50.1/6XY/Z	–	25/–XY/Z	–	–	✗	✗	✗	–	~	📄
PP-GFPP FibCR20	CR-3D ↗	1.75	250°C	50°C	✗	✓	✗	–	–	125	–	105	–	5	14.45	0.98	✗	✗	✗	–	✓	📄
PP-GFPP GF	FILOALFA ↗	1.75	235–260°C	40–80°C	✓	✓	✗	–	130	100	–	70	80	3	13	1.12	✗	✗	✗	–	✓	📄
PP-GFPP GF20	purefil ↗	1.75	200–260°C	70–110°C	–	✓	–	–	–	140	–	–	–	–	–	–	✗	✗	✗	–	~	–
PP-GFPP GF30	BCN3D ↗	2.85	230–250°C	20–40°C	✓	✓	✗	–	–	–	–	35.8	89.2	4.4	19.8	0.94	✗	✗	✗	–	✓	📄
PP-GFPP Glass Fiber	Prusament ↗	1.75	235–255°C	85–105°C	✗	✓	✗	–	–	112.6	–	40.3/48.8XY/Z	50.2/70.4XY/Z	4.5/4.1XY/Z	7.9/9.9XY/Z	1.12	✗	✗	✗	–	✓	📄
PP-GFUltrafuse PP GF30	Forward AM ↗	1.75	240–260°C	20–90°C	✗	✓	✗	60°C / 4h	–	73	-5	41.7	76.8	4.4	5.3	1.066	✗	✗	✗	–	✓	📄
PP-GFr-UltraMarathon PP GF	3D4Makers ↗	1.75	220–240°C	40–60°C	✗	✓	✗	–	–	–	–	67	–	–	–	1.12	✗	✗	✗	✓	~	–
PP-GFr-UltraMarathon PP GF	3D4Makers ↗	2.85	220–240°C	40–60°C	✗	✓	✗	–	–	–	–	67	–	–	–	1.12	✗	✗	✗	✓	~	–
PPSPPS	Mingda ↗	1.75	300–320°C	100–110°C	✓	✓	✓	120°C / 6h	–	110	–	57	95	2.5	–	1.38	✗	✗	✗	–	✓	📄
PPSPRO Series PPS	MatterHackers ↗	1.75	330–370°C	120–150°C	✓	✓	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PPSPps Am230	Spectrum Filaments ↗	1.75	285–330°C	90–130°C	✓	✗	✓	90°C / 3h	230	236	–	65	–	2	1.3	1.33	✗	✗	✗	–	✓	📄
PPS-CFLuvocom 3F PPS-CF 9938 BK	3D4Makers ↗	2.85	310–340°C	80–100°C	✓	✓	✓	120°C / 6h	–	–	–	120	170	1.6	22	1.51	✗	✗	✗	–	✓	📄
PPS-CFLuvocom 3F PPS-CF 9938 BK	3D4Makers ↗	1.75	310–340°C	80–100°C	✓	✓	✓	120°C / 6h	–	–	–	120	170	1.6	22	1.51	✗	✗	✗	–	✓	📄
PPS-CFPPS CF10	CR-3D ↗	1.75	320°C	55°C	✓	✓	✓	90°C / 12h	–	250	–	100	–	1.7	24	1.45	✗	✗	✗	–	✓	📄
PPS-CFPPS-CF	Qidi Tech ↗	1.75	310–350°C	100°C	–	✓	–	–	268	242.7	–	60/–XY/Z	105/–XY/Z	6/–XY/Z	25/–XY/Z	1.3	✗	✗	✗	–	✓	📄
PPS-CFPPS-CF10	Mingda ↗	1.75	310–350°C	80–90°C	✓	✓	✓	120°C / 6h	267.5	133	97.7	59.4	94.3	1.4	5.3	1.29	✗	✗	✗	–	✓	📄
PPS-GFPPS-GF20	Qidi Tech ↗	1.75	310–350°C	80–90°C	✗	✓	✓	100°C / 10h	272.5	125.8	95	64.1/22.9XY/Z	102.3/45.7XY/Z	2/1.1XY/Z	27.3/4.3XY/Z	1.36	✗	✗	✗	–	✓	📄
PPS-GFPPS-GF20	Mingda ↗	1.75	310–350°C	80–90°C	✓	✓	✓	120°C / 6h	272.5	125.8	95	64.1	102.3	2	7.3	1.36	✗	✗	✗	–	✓	📄
PPSUPPSU	3D4Makers ↗	1.75	360–400°C	120–160°C	✓	✗	✓	120°C / 3h	–	207	220	69.6	91	120	58	1.29	✗	✓	✗	–	✓	📄
PPSUPPSU	3D4Makers ↗	2.85	360–400°C	120–160°C	✓	✗	✓	120°C / 3h	–	207	220	69.6	91	120	58	1.29	✗	✓	✗	–	✓	📄
PPSUPrimaSelect PPSU	PrimaCreator ↗	1.75	360–400°C	140°C	✓	✗	✓	–	–	–	–	–	–	–	–	1.29	✗	✗	✗	–	~	📄
PPSUThermaX PPSU	3DXTech ↗	1.75	390–410°C	130–150°C	✓	✗	✓	–	–	190	230	55	110	3	–	1.28	✗	✗	✗	–	✓	📄
PVA3D-Solve	Keene Village Plastics ↗	1.75	205–240°C	50–90°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	📄
PVAAquaSolve - PVA	FormFutura ↗	1.75	180–205°C	0–60°C	✗	✗	✓	–	60.2	–	–	78	–	9.9	1.6	1.23	✗	✗	✗	–	✓	📄
PVAAquaprint	Spectrum Filaments ↗	1.75	190–215°C	25–70°C	✗	✗	✓	–	–	–	62.5	–	–	–	–	0.75	✗	✗	✗	–	~	📄
PVAAtlas Support	FormFutura ↗	1.75	180–205°C	0–60°C	✗	✗	✓	–	60.2	–	–	–	–	–	1.7	1.22	✗	✗	✗	–	✓	📄
PVABVOH	FormFutura ↗	1.75	200–230°C	65–75°C	✗	✗	✓	–	63	–	–	–	–	–	–	1.14	✗	✗	✗	–	~	📄
PVAFSM 900	Print-Me ↗	2.85	200–210°C	80–100°C	✗	✗	✓	45°C / 4h	–	57	–	–	–	–	–	1.14	✗	✗	✗	–	~	–
PVAFSM 900	Print-Me ↗	1.75	200–210°C	80–100°C	✗	✗	✓	45°C / 4h	–	57	–	–	–	–	–	1.14	✗	✗	✗	–	~	–
PVAPVA	Gembird ↗	1.75	170–200°C	50–70°C	✗	✗	✓	45°C / 8h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PVAPVA	UltiMaker ↗	2.85	215–225°C	60°C	✗	✗	✓	–	–	–	58.4	–	–	–	–	1.23	✗	✗	✗	–	~	📄
PVAPVA	Qidi Tech ↗	1.75	–	–	–	–	–	–	–	–	–	–	–	–	–	1.25	✗	✗	✗	✗	!	📄
PVAPVA	Snapmaker ↗	1.75	215–225°C	25–60°C	✗	✗	✓	45°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PVAPVA	purefil ↗	1.75	190–220°C	60–90°C	–	–	–	80°C / 4h	–	–	–	28.5	–	125	–	1.26	✗	✗	✗	–	✓	–
PVAPVA	Mingda ↗	1.75	210–220°C	60–70°C	✗	✗	✓	–	65	–	–	23	–	215	–	1.15	✗	✗	✗	✗	✓	📄
PVAPVA Optimized	Tronxy ↗	1.75	190–200°C	50–80°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PVAPVA Standard	Tronxy ↗	1.75	160–180°C	50–80°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	✗	~	–
PVAPolyDissolve S1	Polymaker ↗	1.75	215–225°C	25–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	1.13	✗	✗	✗	–	~	📄
PVAPrimaSelect PVA HT	PrimaCreator ↗	1.75	235–255°C	80–90°C	✗	✗	✓	–	–	–	–	–	–	–	–	1.19	✗	✗	✗	–	~	📄
PVAPrimaSelect PVA+	PrimaCreator ↗	1.75	180–210°C	–	✗	✗	✓	–	60.2	–	–	78	–	9.9	1.6	1.23	✗	✗	✗	–	✓	📄
PVAPva	eSUN ↗	1.75	180–230°C	45–60°C	–	–	✓	45°C / 10h	–	–	–	22	–	360	–	1.25	✗	✗	✗	–	✓	📄
PVAPva Pro	eSUN ↗	1.75	190–220°C	25–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PVBFiberSmooth PVB	Fiberlogy ↗	1.75	215–225°C	75°C	✗	✗	–	40°C / 4h	–	–	–	–	–	–	–	–	✗	✗	✗	–	~	–
PVBPVB	Prusament ↗	1.75	205–225°C	70–80°C	✗	✗	✓	60°C / 6h	–	58	–	50/49XY/Z	72/73XY/Z	4.6/4.4XY/Z	7/10XY/Z	1.1	✗	✗	✗	–	✓	📄
PVBPolySmooth	Polymaker ↗	1.75	190–220°C	25–70°C	✗	✗	✗	55°C / 12h	70	66.3	70	–/18.4XY/Z	76.2	3.4	9.2	1.1	✗	✗	✗	–	✓	📄
PVBPolySupport	Polymaker ↗	1.75	220–230°C	25–60°C	✗	✗	✗	–	–	–	–	–	–	–	–	1.22	✗	✗	✗	–	~	📄
PVCVinyl 303	Fillamentum ↗	1.75	215–230°C	80°C	✗	✗	✗	–	71	–	–	46.1	–	13.1	–	1.35	✗	✗	✗	–	✓	📄
PVDFAdamant S1	add:north ↗	2.85	235–245°C	40–50°C	✗	✗	✗	–	–	–	-34	58	120	50	–	1.8	✗	✗	✗	–	✓	📄
PVDFAdamant S1	add:north ↗	1.75	235–245°C	40–50°C	✗	✗	✗	–	–	–	-34	58	120	50	–	1.8	✗	✗	✗	–	✓	📄
PVDFFluorodur	Fillamentum ↗	1.75	250–270°C	100°C	✓	✗	✗	–	–	–	–	34	50	8	–	1.79	✗	✗	✗	✓	✓	📄
PVDFKoltron G1	add:north ↗	1.75	285–295°C	55–65°C	✗	✗	✗	60°C / 4h	–	100	-34	51	89	50	–	1.8	✗	✗	✓	–	✓	📄
PVDFKoltron G1	add:north ↗	2.85	285–295°C	55–65°C	✗	✗	✗	60°C / 4h	–	100	-34	51	89	50	–	1.8	✗	✗	✓	–	✓	📄
SANSAN	purefil ↗	1.75	230–260°C	90–110°C	–	–	–	80°C / 4h	110	101	–	60	–	21	16	1.08	✗	✓	✗	–	✓	–
SBSVETROALFA	FILOALFA ↗	1.75	210–230°C	70–90°C	✗	✗	✗	75°C / 3h	93	83	–	27	36	–	–	1.01	✗	✗	✗	–	✓	📄
SKELNÁSkelná vlákna	Filament PM ↗	1.75	270–290°C	110–120°C	✓	✓	–	–	170	165	–	–	–	–	13.4	1.01	✗	✗	✗	–	✓	–
TPEBEND	Ooznest ↗	1.75	235–255°C	100°C	–	–	–	–	38	–	–	24	–	530	–	1.14	✓	✗	✗	✓	✓	📄
TPEBalena Filaflex	Recreus ↗	1.75	195–205°C	70–80°C	✗	✗	✓	60°C / 6h	–	–	–	–	–	–	–	1.16	✓	✗	✗	–	~	📄
TPECoexFlex TPE 30D	Coex3D ↗	1.75	220–240°C	25–85°C	✗	✗	✓	45°C / 6h	–	–	–	–	–	–	–	1.15	✓	✗	✗	–	~	–
TPECoexFlex TPE 40D	Coex3D ↗	1.75	220–240°C	25–85°C	✗	✗	✓	45°C / 6h	–	–	–	–	–	–	–	1.18	✓	✗	✗	–	~	–
TPECoexFlex TPE 60D	Coex3D ↗	1.75	220–240°C	25–85°C	✗	✗	✓	45°C / 6h	–	–	–	–	–	–	–	1.2	✓	✗	✗	–	~	–
TPEElastic Tpe 83a	eSUN ↗	1.75	220–250°C	45–60°C	–	–	✓	55°C / 4h	–	–	–	32	–	420	–	1.14	✓	✗	✗	–	✓	📄
TPEFLEX	Filament PM ↗	1.75	220–240°C	0°C	✗	✗	–	–	100	100	–	–	–	650	–	1.1	✓	✗	✗	–	✓	–
TPEFilaflex SEBS	Recreus ↗	2.85	240–260°C	50–60°C	✓	✗	✗	–	63	35	–	–	–	146	58	0.906	✓	✗	✗	–	✓	📄
TPEFilaflex SEBS	Recreus ↗	1.75	240–260°C	50–60°C	✓	✗	✗	–	63	35	–	–	–	146	58	0.906	✓	✗	✗	–	✓	📄
TPEFlex 20ShD	Print-Me ↗	1.75	225–240°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	–	18.2	1.15	✓	✗	✗	–	~	–
TPEFlex 40ShD	Print-Me ↗	1.75	225–240°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	–	18.2	1.15	✓	✗	✗	–	~	–
TPEFlex 55ShD	Print-Me ↗	1.75	225–240°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPEFlex B4C	Nanovia ↗	1.75	220–240°C	40–60°C	✗	✗	–	–	–	–	–	–	–	–	–	1.45	✓	✗	✗	–	~	–
TPEFlex FibCR20	CR-3D ↗	1.75	250°C	70°C	✗	✓	✓	70°C / 5h	–	147	–	55	–	250	–	1.3	✓	✗	✗	✓	✓	📄
TPEFlex MDT	Print-Me ↗	1.75	225–240°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPEFlex V0	Nanovia ↗	1.75	235–245°C	20–40°C	✗	✗	–	–	–	–	–	27	–	524	–	1.21	✓	✗	✗	–	✓	–
TPEFlex VX	Nanovia ↗	1.75	210–230°C	20–40°C	✗	✗	–	–	91	–	-32	–	–	–	–	1.25	✓	✗	✗	–	✓	–
TPEFlexfill TPE 90A	Fillamentum ↗	1.75	225–245°C	50–60°C	✗	✗	✗	–	–	–	–	5	–	250	–	1.15	✓	✗	✗	✓	✓	📄
TPEFlexfill TPE 96A	Fillamentum ↗	1.75	225–245°C	50–60°C	✗	✗	✗	–	–	–	–	5	–	150	–	1.15	✓	✗	✗	✓	✓	📄
TPEFlexible TPE	Protopasta ↗	1.75	230–250°C	25–45°C	✗	✗	✗	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPEISTROFLEX	Nanovia ↗	1.75	210–230°C	20–40°C	✗	✗	–	–	91	–	–	11.5	–	300	–	1.55	✓	✗	✗	–	✓	–
TPENinjaFlex Edge	NinjaTek ↗	1.75	225–250°C	–	✗	✗	✓	–	–	–	-80	13.9	–	900	–	1.08	✓	✗	✗	–	✓	📄
TPEPEBA 95A	Qidi Tech ↗	1.75	230–260°C	60–100°C	–	✗	✓	72°C / 5h	102.8	–	–	32.58/–XY/Z	–	1106.8/–XY/Z	–	1.01	✓	✗	✗	–	✓	📄
TPEPRO Series Flex	MatterHackers ↗	1.75	235°C	50–65°C	✗	✗	✓	–	–	–	–	–	–	600	–	–	✓	✗	✗	–	~	–
TPEPRO Series Flex	MatterHackers ↗	2.85	235°C	50–65°C	✗	✗	✓	–	–	–	–	–	–	600	–	–	✓	✗	✗	–	~	–
TPEPrimaSelect OBC	PrimaCreator ↗	1.75	210–240°C	70–90°C	✗	✗	✗	–	95	60	–	12.5	2.5	800	33.5	0.9	✓	✗	✗	–	✓	📄
TPESoft PLA	CR-3D ↗	1.75	220°C	0–60°C	✗	✗	✗	–	–	68	–	–	–	500	–	1.28	✓	✗	✗	–	✓	📄
TPETPC	purefil ↗	1.75	220–250°C	50–70°C	–	–	–	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPETPE	Gembird ↗	1.75	190–240°C	30–60°C	✗	✗	✓	65°C / 6h	–	–	–	43	–	500	–	0.9	✓	✗	✗	–	✓	–
TPETPE 22D	Nanovia ↗	1.75	220–240°C	30–50°C	✗	✗	–	–	–	–	–	–	–	–	–	1	✓	✗	✗	–	~	–
TPETPE 32	Filament PM ↗	1.75	220–240°C	0°C	✗	✗	✓	–	100	100	–	–	–	650	–	0.88	✓	✗	✗	–	✓	📄
TPETPE 88	Filament PM ↗	1.75	200–230°C	–	✗	✗	–	–	100	100	–	–	–	–	–	0.88	✓	✗	✗	–	✓	📄
TPETPE 88A	Francofil ↗	1.75	220–240°C	0–30°C	✗	✗	✓	–	–	–	–	6.34	1.8	330	8.1	1.17	✓	✗	✗	–	✓	📄
TPETPS 40D	purefil ↗	1.75	220–250°C	50–70°C	–	–	–	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPETPV 98A	purefil ↗	1.75	220–250°C	50–70°C	–	–	–	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPEUltrafuse TPC 45D	Forward AM ↗	1.75	220–240°C	20–60°C	✗	✗	✓	60°C / 4h	–	–	-35	–	–	–	–	1.15	✓	✗	✗	–	~	📄
TPEUltrafuse TPS 90A	Forward AM ↗	1.75	260–280°C	70–90°C	✗	✗	✓	–	–	–	-59	7	–	280	14.1	1.044	✓	✗	✗	–	✓	📄
TPEnGen Flex	colorFabb ↗	1.75	240–260°C	80°C	–	–	✓	–	–	100	130	19.3	8.9	320	66.1	1.13	✓	✗	✗	–	✓	📄
TPUALFA TPU 90A	FILOALFA ↗	1.75	190–210°C	0–50°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUAmpere TPU	Print-Me ↗	1.75	225–240°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	–	18.2	1.15	✓	✗	✓	–	~	–
TPUCheetah	NinjaTek ↗	1.75	225–250°C	–	✗	✗	✓	125°C / ?h	–	74	-24	39	–	580	19.1	1.22	✓	✗	✗	–	✓	📄
TPUChinchilla	NinjaTek ↗	1.75	225–235°C	–	✗	✗	✓	–	–	–	-80	22	–	600	–	1.13	✓	✗	✗	–	✓	📄
TPUCoexFlex TPU 60A	Coex3D ↗	1.75	205–225°C	0°C	✗	✗	✓	45°C / 6h	–	–	–	–	–	–	–	1.14	✓	✗	✗	–	~	–
TPUConductive Filaflex	Recreus ↗	1.75	250–255°C	0–55°C	✗	✗	✓	55°C / 1h	50	50	–	–	–	50	–	1.33	✓	✗	✓	–	✓	📄
TPUConductive TPU	Matter3D ↗	1.75	225–245°C	40–60°C	✗	✓	✓	65°C / 12h	–	65	–	32.5	–	–	–	–	✓	✗	✓	–	~	–
TPUEasyFlex	add:north ↗	1.75	230–250°C	40–60°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUEasyPrint FLEX TPU	PrimaCreator ↗	1.75	180–230°C	40–60°C	✗	✗	✓	70°C / 1h	–	–	–	55	–	400	–	1.21	✓	✗	✗	–	✓	📄
TPUEel	NinjaTek ↗	1.75	220–230°C	–	✗	✗	✓	–	–	–	–	12	–	355	–	1.18	✓	✗	✓	–	✓	📄
TPUEflex Tpu 87a	eSUN ↗	1.75	5–60°C	5–60°C	✗	–	✓	55°C / ?h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUElasti TPU 90A	3DPower ↗	1.75	215–240°C	30–60°C	✗	✗	✓	70°C / 10h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUEtpu 95a	eSUN ↗	1.75	220–250°C	45–60°C	✗	–	✓	55°C / 4h	–	–	–	35	–	800	–	1.21	✓	✗	✗	–	✓	📄
TPUEtpu Antibacteria	eSUN ↗	1.75	220–250°C	45–60°C	✗	✗	✓	55°C / 4h	–	–	–	35	–	800	–	1.21	✓	✗	✗	–	✓	📄
TPUEtpu Lw	eSUN ↗	1.75	210–270°C	40–60°C	✗	–	✓	–	–	–	–	24.5	5.4	–	–	1.12	✓	✗	✗	–	✓	📄
TPUFLEX Hard	Extrudr ↗	1.75	230–260°C	50–90°C	✗	–	✓	–	140	–	-24	–	–	–	–	1.2	✓	✗	✗	–	✓	📄
TPUFLEX Hard CF	Extrudr ↗	1.75	230–260°C	50–90°C	✗	✓	–	–	140	–	-24	–	–	–	–	1.22	✓	✗	✗	–	✓	📄
TPUFLEX Medium	Extrudr ↗	1.75	230–250°C	50–90°C	✗	–	✓	–	110	–	-30	–	–	–	–	1.19	✓	✗	✗	–	✓	📄
TPUFLEX Medium ESD	Extrudr ↗	1.75	220–250°C	50°C	✗	–	–	–	–	–	–	40	–	430	–	–	✓	✗	✓	–	~	📄
TPUFLEX Medium MATT	Extrudr ↗	1.75	220–250°C	50°C	✗	–	✓	–	–	–	–	52	–	–	–	1.15	✓	✗	✗	–	~	📄
TPUFLEX Semisoft	Extrudr ↗	1.75	220–250°C	50–90°C	✗	–	–	–	98	–	-34	–	–	–	–	1.18	✓	✗	✗	–	✓	📄
TPUFiberFlex 30D	Fiberlogy ↗	1.75	200–220°C	50–70°C	✗	✗	✓	60°C / 4h	–	–	–	22	–	870	–	1.07	✓	✗	✗	–	✓	📄
TPUFiberFlex 40D	Fiberlogy ↗	1.75	200–220°C	50–70°C	✗	✗	✓	60°C / 4h	–	70	–	28	–	700	–	1.16	✓	✗	✗	–	✓	📄
TPUFiberFlex CF	Fiberlogy ↗	1.75	190–205°C	80°C	✗	✓	✓	80°C / 4h	91	70	–	60	–	15	40	1.23	✓	✗	✗	–	✓	📄
TPUFilaflex 60A	Recreus ↗	2.85	235°C	0–45°C	✗	✗	✓	55°C / 1h	70	–	-54	26	–	950	–	1.07	✓	✗	✗	–	✓	📄
TPUFilaflex 60A	Recreus ↗	1.75	235°C	0–45°C	✗	✗	✓	55°C / 1h	70	–	-54	26	–	950	–	1.07	✓	✗	✗	–	✓	📄
TPUFilaflex 70A	Recreus ↗	2.85	240°C	0–50°C	✗	✗	✓	55°C / 1h	84	–	-50	32	–	900	–	1.08	✓	✗	✗	–	✓	📄
TPUFilaflex 70A	Recreus ↗	1.75	240°C	0–50°C	✗	✗	✓	55°C / 1h	84	–	-50	32	–	900	–	1.08	✓	✗	✗	–	✓	📄
TPUFilaflex 82A	Recreus ↗	2.85	240–248°C	45–50°C	✗	✗	✓	55°C / 1h	113	–	-42	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 82A	Recreus ↗	1.75	240–248°C	45–50°C	✗	✗	✓	55°C / 1h	113	–	-42	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 82A Footwearology	Recreus ↗	2.85	240–248°C	45–50°C	✗	✗	✓	55°C / 1h	113	–	-42	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 82A Footwearology	Recreus ↗	1.75	240–248°C	45–50°C	✗	✗	✓	55°C / 1h	113	–	-42	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 95 Foamy	Recreus ↗	1.75	248–252°C	0–55°C	✗	✗	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 95 Foamy	Recreus ↗	2.85	248–252°C	0–55°C	✗	✗	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 95 Foamy Footwearology	Recreus ↗	2.85	248–252°C	0–55°C	–	✗	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 95 Foamy Footwearology	Recreus ↗	1.75	248–252°C	0–55°C	–	✗	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex 95A	Recreus ↗	2.85	245–250°C	50–55°C	✗	✗	✗	55°C / 1h	125	–	–	33	–	500	–	1.24	✓	✗	✗	–	✓	📄
TPUFilaflex 95A	Recreus ↗	1.75	245–250°C	50–55°C	✗	✗	✗	55°C / 1h	125	–	–	33	–	500	–	1.24	✓	✗	✗	–	✓	📄
TPUFilaflex Foamy	Recreus ↗	1.75	248–252°C	50–55°C	✗	✗	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex Foamy	Recreus ↗	2.85	248–252°C	50–55°C	✗	✗	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex Foamy Footwearology	Recreus ↗	1.75	248–252°C	50–55°C	–	–	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex Foamy Footwearology	Recreus ↗	2.85	248–252°C	50–55°C	–	–	✓	55°C / 1h	113	–	–	45	–	650	–	1.12	✓	✗	✗	–	✓	📄
TPUFilaflex Purifier	Recreus ↗	2.85	215–250°C	0°C	✗	✗	✓	55°C / 1h	113	–	-42	43	–	617	–	1.17	✓	✗	✗	–	✓	📄
TPUFilaflex Purifier	Recreus ↗	1.75	215–250°C	0°C	✗	✗	✓	55°C / 1h	113	–	-42	43	–	617	–	1.17	✓	✗	✗	–	✓	📄
TPUFlexfill TPU 92A	Fillamentum ↗	1.75	220–240°C	50–60°C	✗	✗	✓	–	–	–	–	49	–	600	–	1.2	✓	✗	✗	–	✓	📄
TPUFlexfill TPU 98A	Fillamentum ↗	1.75	220–240°C	50–60°C	✗	✗	✓	–	–	–	–	53.7	–	318	–	1.23	✓	✗	✗	–	✓	📄
TPUFlexiLight	3DLabPrint ↗	1.75	235–250°C	25°C	✗	✗	✓	–	–	–	–	–	–	–	–	1.2	✓	✗	✗	–	~	–
TPUFlexible 85A	Azure Film ↗	1.75	200–240°C	0–80°C	✗	✗	✓	–	–	–	–	4	–	660	–	1.12	✓	✗	✗	–	✓	📄
TPUFlexible 98A	Azure Film ↗	1.75	200–240°C	0–80°C	✗	✗	✓	–	–	–	–	45	–	350	–	1.16	✓	✗	✗	–	✓	📄
TPUHP-TPU	Creality ↗	1.75	210–240°C	–	✗	–	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUHigh Flow TPU95	Snapmaker ↗	1.75	200–220°C	25–50°C	✗	✗	✗	–	–	–	–	23.11	–	462.3	–	–	✓	✗	✗	–	~	–
TPUMH Build Series TPU	MatterHackers ↗	1.75	210–240°C	20–60°C	✗	✗	✓	–	–	–	–	52	–	500	–	1.12	✓	✗	✗	–	✓	📄
TPUMattFlex 40D	Fiberlogy ↗	1.75	210–230°C	50–70°C	✗	✗	✓	50°C / 4h	–	70	–	30	–	600	–	1.16	✓	✗	✗	–	✓	📄
TPUMorPhlex TPU	BIQU ↗	1.75	225–260°C	40–60°C	✗	✗	✓	65°C / 4h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	📄
TPUNinjaFlex	NinjaTek ↗	1.75	225–250°C	–	✗	✗	✓	125°C / ?h	–	60	-35	26	–	660	4.2	1.19	✓	✗	✗	–	✓	📄
TPUPolyFlex TPU90	Polymaker ↗	1.75	210–230°C	25–60°C	✗	✗	✓	70°C / 8h	–	–	–	30	–	586.8	–	1.12	✓	✗	✗	–	✓	📄
TPUPolyFlex TPU95	Polymaker ↗	1.75	210–230°C	25–60°C	✗	✗	✓	70°C / 8h	–	–	–	–	–	330.1	–	1.22	✓	✗	✗	–	~	📄
TPUPolyFlex TPU95-HF	Polymaker ↗	1.75	200–220°C	25–50°C	✗	✗	✓	70°C / 8h	–	–	–	23.11	–	462.3	–	1.16	✓	✗	✗	–	✓	📄
TPUPrimaSelect FLEX	PrimaCreator ↗	1.75	220–260°C	90–100°C	✗	✗	✓	–	–	–	–	24	–	530	–	1.14	✓	✗	✗	–	✓	📄
TPUPrimaSelect Flex TPU 64D	PrimaCreator ↗	1.75	215–240°C	55–80°C	✗	✗	✓	–	–	–	–	33	22.5	415	117.5	1.203	✓	✗	✗	–	✓	📄
TPUPrimaSelect Flex TPU 85A	PrimaCreator ↗	1.75	210–230°C	50–80°C	✗	✗	✓	–	–	–	–	19	–	1390	–	1.11	✓	✗	✗	–	✓	📄
TPUPrimaSelect TPU 77D	PrimaCreator ↗	1.75	215–240°C	55–80°C	✗	✗	✓	–	–	–	–	42.5	71.5	355	25.5	1.24	✓	✗	✗	✗	✓	📄
TPUPrimaSelect TPU 80A	PrimaCreator ↗	1.75	210–230°C	50–80°C	✗	✗	✓	–	–	–	–	13	–	1340	–	1.157	✓	✗	✗	✗	✓	📄
TPUPrimaSelect TPU 90A	PrimaCreator ↗	1.75	220–240°C	30–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	✗	~	–
TPUPrimaSelect TPU 95A	PrimaCreator ↗	1.75	225–245°C	50–80°C	✗	✗	✓	–	–	–	–	30	–	900	–	1.14	✓	✗	✗	✗	✓	📄
TPUPrintMe Flex	Print-Me ↗	1.75	270–310°C	80–120°C	✗	✗	✓	–	–	80	–	–	63	–	18.2	1.15	✓	✗	✗	–	✓	–
TPUPython Flex TPU 90A	FormFutura ↗	1.75	220–250°C	0–60°C	✗	✗	✓	–	–	74	–	35	–	500	–	1.22	✓	✗	✗	–	✓	📄
TPUPython Flex TPU 98A	FormFutura ↗	1.75	220–250°C	0–60°C	✗	✗	✓	–	138	–	–	50	–	450	–	1.16	✓	✗	✗	–	✓	📄
TPURapid TPU	Elegoo ↗	1.75	220–240°C	30–45°C	✗	✗	✓	70°C / 8h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUReForm - rTPU 85A	FormFutura ↗	1.75	220–250°C	60–80°C	✗	✗	✓	60°C / 24h	–	74	–	28	–	355	–	1.21	✓	✗	✗	–	✓	📄
TPUReForm - rTPU 90A	FormFutura ↗	1.75	220–250°C	60–80°C	✗	✗	✓	60°C / 24h	–	74	–	29.5	–	355	–	1.21	✓	✗	✗	–	✓	📄
TPUReForm - rTPU 95A	FormFutura ↗	1.75	220–250°C	60–80°C	✗	✗	✓	60°C / 24h	–	74	–	32	–	355	–	1.21	✓	✗	✗	–	✓	📄
TPUReciflex	Recreus ↗	1.75	245–250°C	20–55°C	✗	✗	✓	55°C / 1h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUReciflex	Recreus ↗	2.85	245–250°C	20–55°C	✗	✗	✓	55°C / 1h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUS Flex 85a	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✗	✗	–	–	–	–	40	–	85	–	1.11	✓	✗	✗	–	✓	📄
TPUS Flex 90a	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✗	✓	–	–	–	–	35	–	90	–	1.22	✓	✗	✗	–	✓	📄
TPUS Flex 98a	Spectrum Filaments ↗	1.75	200–230°C	0–50°C	✗	✗	✓	–	–	–	–	55	–	98	–	1.09	✓	✗	✗	–	✓	📄
TPUSemper-Flexx98	Keene Village Plastics ↗	1.75	230–260°C	70–100°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	📄
TPUSumma-Flexx50	Keene Village Plastics ↗	1.75	230–260°C	70–100°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	📄
TPUTPU	ERYONE ↗	1.75	200°C	0–60°C	✗	–	✓	85°C / 12h	–	–	–	–/22XY/Z	–	–	–	1.22	✓	✗	✗	–	~	📄
TPUTPU	Printalot ↗	2.85	210–240°C	30–60°C	✗	✗	✓	65°C / 8h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU	Devil Design ↗	1.75	210–230°C	20–80°C	✗	✗	✓	–	–	–	–	44	–	400	–	1.23	✓	✗	✗	–	✓	📄
TPUTPU	Printalot ↗	1.75	210–240°C	30–60°C	✗	✗	✓	65°C / 8h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU	purefil ↗	1.75	220–240°C	50–70°C	–	–	–	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU	Geeetech ↗	1.75	220–230°C	30–60°C	✗	✗	✓	50°C / 6h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU	Das Filament ↗	1.75	205–235°C	0°C	✗	✗	✓	–	–	–	–	–	–	–	–	1.23	✓	✗	✗	–	~	–
TPUTPU	Tronxy ↗	1.75	220–260°C	25–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU	Kingroon ↗	1.75	200–230°C	40–60°C	✗	✗	✓	65°C / 6h	–	–	–	38	–	680	–	1.21	✓	✗	✗	–	✓	–
TPUTPU	JAYO ↗	1.75	210–220°C	70–80°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU 100A	Push Plastic ↗	2.85	220–250°C	70°C	✗	✗	✓	60°C / 6h	–	–	–	43	–	396	–	–	✓	✗	✗	–	~	📄
TPUTPU 100A	Push Plastic ↗	1.75	220–250°C	70°C	✗	✗	✓	60°C / 6h	–	–	–	43	–	396	–	–	✓	✗	✗	–	~	📄
TPUTPU 70D	Nanovia ↗	1.75	230–250°C	60–80°C	✗	✗	✓	–	–	–	–	–	–	320	–	1.12	✓	✗	✗	–	~	–
TPUTPU 85A	CR-3D ↗	1.75	220°C	60°C	✗	✗	✓	–	–	–	–	45	–	300	–	1.12	✓	✗	✗	–	✓	📄
TPUTPU 85A	colorFabb ↗	1.75	220–230°C	30–40°C	–	–	✓	–	–	–	20	30	1.55	560	15.3	1.21	✓	✗	✗	–	✓	📄
TPUTPU 85A / TPU 90A	Bambu Lab ↗	1.75	200–250°C	30–35°C	✗	✗	✓	70°C / 8h	–	–	–	12.5/10.1XY/Z	–	650/350XY/Z	124.2/87.3XY/Z	1.24	✓	✗	✗	–	✓	📄
TPUTPU 90A	Filamentive ↗	1.75	200–225°C	35–60°C	✗	✗	✓	60°C / 2h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU 90A	Sunlu ↗	1.75	200–230°C	25–60°C	✗	✗	✓	50°C / ?h	–	52	–	34.4/–XY/Z	4.26	1063	–	1.23	✓	✗	✗	–	✓	📄
TPUTPU 93A	Filacraft ↗	1.75	230–240°C	35–40°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU 95A	Hatchbox ↗	1.75	190–235°C	30–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	✗	~	–
TPUTPU 95A	Francofil ↗	2.85	240–260°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	237	–	1.21	✓	✗	✗	–	~	📄
TPUTPU 95A	Sunlu ↗	1.75	200–230°C	25–60°C	✗	✗	✓	50°C / ?h	–	52	–	34.4/–XY/Z	4.26	1063	–	1.23	✓	✗	✗	–	✓	📄
TPUTPU 95A	Elegoo ↗	1.75	220–240°C	30–45°C	✗	✗	✓	70°C / 8h	–	–	–	–	–	500	–	–	✓	✗	✗	–	~	–
TPUTPU 95A	Overture3D ↗	1.75	210–230°C	25–60°C	✗	✗	✓	70°C / 7h	–	–	–	30.1	–	332.1	–	1.18	✓	✗	✗	–	✓	📄
TPUTPU 95A	colorFabb ↗	1.75	220–230°C	30–40°C	–	–	✓	–	–	–	25	17	2.9	265	78	1.21	✓	✗	✗	–	✓	📄
TPUTPU 95A	UltiMaker ↗	2.85	220–235°C	70°C	✗	✗	✓	–	115.7	50.3	–	37.9	4.3	700	36	1.22	✓	✗	✗	–	✓	📄
TPUTPU 95A	Francofil ↗	1.75	240–260°C	40–60°C	✗	✗	✓	–	–	–	–	–	–	237	–	1.21	✓	✗	✗	–	~	📄
TPUTPU 95A	Prusament ↗	1.75	220–240°C	55–75°C	✗	✗	✗	60°C / 4h	101.6	78.6	–	41.4	–	563.3	–	1.25	✓	✗	✗	–	✓	📄
TPUTPU 95A	Qidi Tech ↗	1.75	220–260°C	60°C	✗	✗	✗	50°C / 4h	–	–	–	–	–	–	–	1.21	✓	✗	✗	–	~	📄
TPUTPU 95A	Snapmaker ↗	1.75	210–230°C	25–60°C	✗	✗	✗	–	–	–	–	29	–	330.1	–	–	✓	✗	✗	–	~	–
TPUTPU 95A HF	Snapmaker ↗	1.75	200–250°C	25–50°C	✗	✗	✓	70°C / 6h	–	–	–	18.6	3.2	459.3	–	1.216	✓	✗	✗	–	✓	–
TPUTPU 95A HF	Bambu Lab ↗	1.75	220–240°C	30–35°C	✗	✗	✓	70°C / 8h	–	–	–	27.3/22.3XY/Z	–	650/480XY/Z	123.2/86.3XY/Z	1.22	✓	✗	✗	–	✓	📄
TPUTPU 96	Filament PM ↗	1.75	230–270°C	80–90°C	✗	✗	✓	–	85	70	–	–	–	–	11	1.15	✓	✗	✗	–	✓	📄
TPUTPU 98A	Filamentive ↗	1.75	200–230°C	50–60°C	✗	✗	✓	60°C / 2h	–	75	–	55	–	510	–	1.09	✓	✗	✗	–	✓	📄
TPUTPU 98A	Francofil ↗	2.85	210–240°C	–	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU 98A	Francofil ↗	1.75	210–240°C	–	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU 98A	BCN3D ↗	2.85	225–245°C	35–45°C	✗	✗	✓	–	138	–	-16	50	–	450	–	1.16	✓	✗	✗	–	✓	📄
TPUTPU 98A	Material4Print ↗	1.75	215–235°C	35–50°C	–	–	✓	–	116	–	–	40	–	470	–	1.18	✓	✗	✗	–	✓	📄
TPUTPU A95	3DJAKE ↗	1.75	200–230°C	60–90°C	✗	✗	✓	–	95	–	–	55	–	400	–	1.2	✓	✗	✗	–	✓	📄
TPUTPU A95	3DJAKE ↗	2.85	200–230°C	60–90°C	✗	✗	✓	–	95	–	–	55	–	400	–	1.2	✓	✗	✗	–	✓	📄
TPUTPU ASA	JAYO ↗	1.75	210–230°C	70–80°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU ESD	CR-3D ↗	1.75	235°C	60°C	✗	✗	✓	–	–	–	80	40	–	430	–	1.2	✓	✗	✓	–	✓	📄
TPUTPU FLEX 96A	PrintWithSmile ↗	1.75	210–250°C	50–70°C	✗	✗	✓	–	–	–	–	–	–	–	–	1.31	✓	✗	✗	✗	~	–
TPUTPU Flex	3D Fila ↗	1.75	210–240°C	30–60°C	✗	✗	✓	65°C / 8h	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU Silk	Gembird ↗	1.75	220–240°C	30–50°C	✗	✗	✓	65°C / 6h	–	–	–	–	–	–	–	1.24	✓	✗	✗	–	~	–
TPUTPU-53D	SWISSFIL ↗	1.75	210–230°C	30–60°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	–
TPUTPU-Aero	Qidi Tech ↗	1.75	230–270°C	30–45°C	–	–	✓	75°C / 5h	–	–	–	9.8/–XY/Z	–	598.69/–XY/Z	–	1.15	✓	✗	✗	–	✓	📄
TPUTPU-GF	Qidi Tech ↗	1.75	240–270°C	40–60°C	–	–	✓	75°C / 5h	157.3	–	–	30.92/–XY/Z	14.47/–XY/Z	74.8/–XY/Z	–	1.32	✓	✗	✗	–	✓	📄
TPUTPU-R	CREAMELT ↗	1.75	210–230°C	70–75°C	✗	✗	✓	80°C / 5h	–	–	-40	27	–	320	138	1.2	✓	✗	✗	–	✓	📄
TPUTPU78D-HF	Mingda ↗	1.75	210–230°C	20–50°C	✗	✗	✓	70°C / 4h	122	–	–	36.55	–	237.38	–	1.28	✓	✗	✗	–	✓	📄
TPUTPU95A-HF	Qidi Tech ↗	1.75	210–230°C	20–50°C	–	✗	✓	75°C / 5h	99	–	–	31.81/–XY/Z	–	471/–XY/Z	–	1.15	✓	✗	✗	–	✓	📄
TPUTPU95A-HF	Mingda ↗	1.75	210–230°C	20–50°C	✗	✗	✓	50°C / 4h	99	–	–	31.81	–	471	–	1.15	✓	✗	✗	–	✓	📄
TPUTPU95A-HF	Mingda ↗	2.85	210–230°C	20–50°C	✗	✗	✓	75°C / 5h	99	–	–	31.81	–	471	–	1.15	✓	✗	✗	–	✓	📄
TPUThe Filament Tpu 82a	Spectrum Filaments ↗	1.75	210–240°C	0–50°C	✗	✗	✓	–	–	–	–	28	–	90	–	1.21	✓	✗	✗	–	✓	📄
TPUThe Filament Tpu 87a	Spectrum Filaments ↗	1.75	210–240°C	0–50°C	✗	✗	✓	–	–	–	–	29.5	–	90	–	1.21	✓	✗	✗	–	✓	📄
TPUThe Filament Tpu 95a	Spectrum Filaments ↗	1.75	210–240°C	0–50°C	✗	✗	✓	–	–	–	–	32	–	90	–	1.21	✓	✗	✗	–	✓	📄
TPUTpu Color Change By Temp	eSUN ↗	1.75	5–60°C	5–60°C	✗	–	✓	55°C / ?h	–	–	–	–	–	–	–	1.21	✓	✗	✗	–	~	–
TPUTpu64d	eSUN ↗	1.75	210–250°C	0–60°C	✗	–	✓	80°C / 6h	–	–	-9	39/25XY/Z	–	140/46XY/Z	–	1.21	✓	✗	✗	–	✓	📄
TPUUltrafuse TPU 64D	Forward AM ↗	1.75	230–255°C	40–60°C	✗	✗	✓	70°C / 5h	–	–	-26	37	–	399	115	1.157	✓	✗	✗	–	✓	📄
TPUUltrafuse TPU 85A	Forward AM ↗	1.75	200–220°C	40°C	✗	✗	✓	70°C / 5h	35	–	-44	34	–	600	–	1.114	✓	✗	✗	–	✓	📄
TPUUltrafuse TPU 95A	Forward AM ↗	1.75	210–230°C	40°C	✗	✗	✓	70°C / 5h	75	–	-25	44.2	–	661	–	1.149	✓	✗	✗	–	✓	📄
TPUVarioshore TPU	colorFabb ↗	1.75	195–260°C	50–60°C	–	–	✓	–	–	–	20	24	3	465	40	1.2	✓	✗	✗	–	✓	📄
TPUVexi-Flexx70	Keene Village Plastics ↗	1.75	230–260°C	70–100°C	✗	✗	✓	–	–	–	–	–	–	–	–	–	✓	✗	✗	–	~	📄
TPU-CFS Flex Carbon	Spectrum Filaments ↗	1.75	210–245°C	0–50°C	✗	✓	✓	85°C / 4h	91	70	–	–	–	90	40	1.23	✓	✗	✗	–	✓	📄