add:north
Adura FDA
PA
Requires enclosure
Print parameters
| Nozzle | 245–270 °C |
|---|---|
| Bed | 50–65 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 70 °C / 8 h |
| Density | 1.1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50MPa |
|---|---|
| Tensile modulus | 1720MPa |
| Elongation at break | 46% |
| Flexural strength | 52MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 105°C |
| Glass transition (Tg) | 51 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.