Anycubic
ASA
ASA
Requires enclosure
Print parameters
| Nozzle | 255–275 °C |
|---|---|
| Bed | 80–100 °C |
| Speed | 50–100 mm/s |
| Fan | 80 % |
| Drying (temp / time) | 75 °C / 10 h |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 41MPa |
|---|---|
| Tensile modulus | 2220MPa |
| Elongation at break | 15% |
| Flexural strength | 62MPa |
| Impact strength | 36kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 90°C |
| Glass transition (Tg) | 103 °C |
| VICAT | 95°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.