colorFabb
colorFabb XT
PETG
Print parameters
| Nozzle | 240–260 °C |
|---|---|
| Bed | 60–70 °C |
| Speed | 40–70 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 55MPa |
|---|---|
| Tensile modulus | 1850MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | 5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 65°C |
| Glass transition (Tg) | 75 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.