colorFabb
nGen Flex
TPE
Print parameters
| Nozzle | 240–260 °C |
|---|---|
| Bed | — |
| Speed | 40–60 mm/s |
| Fan | 80 % |
| Drying (temp / time) | — |
| Density | 1.13 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 19.3MPa |
|---|---|
| Tensile modulus | 150MPa |
| Elongation at break | 320% |
| Flexural strength | 8.9MPa |
| Impact strength | 66.1kJ/m² |
| Hardness | 95A Shore |
| HDT (heat deflection) | 100°C |
| Glass transition (Tg) | 130 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.