colorFabb
PETG Economy
PETG
Print parameters
| Nozzle | 235–255 °C |
|---|---|
| Bed | 70–80 °C |
| Speed | 30–50 mm/s |
| Fan | 75 % |
| Drying (temp / time) | — |
| Density | 1.28 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50MPa |
|---|---|
| Tensile modulus | 1900MPa |
| Elongation at break | 90% |
| Flexural strength | 70MPa |
| Impact strength | 4.7kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 65°C |
| Glass transition (Tg) | 70 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.