colorFabb
PLA Regrind
PLA
Print parameters
| Nozzle | 195–220 °C |
|---|---|
| Bed | 50–60 °C |
| Speed | 40–100 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 59.7MPa |
|---|---|
| Tensile modulus | 3420MPa |
| Elongation at break | 3.8% |
| Flexural strength | 97.6MPa |
| Impact strength | 2.87kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 60°C |
| Glass transition (Tg) | 55 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.