CR-3D
PA 12 flex
PA
Requires enclosure
Print parameters
| Nozzle | 250 °C |
|---|---|
| Bed | 90 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 70 °C / 4 h |
| Density | 1.02 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 25MPa |
|---|---|
| Tensile modulus | 50MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 65D Shore |
| HDT (heat deflection) | 95°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.