ERYONE
ASA High-Speed
ASA
Requires enclosure
Print parameters
| Nozzle | 230 °C |
|---|---|
| Bed | 75–90 °C |
| Speed | 30–200 mm/s |
| Fan | — |
| Drying (temp / time) | 95 °C / 12 h |
| Density | 1.05 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 34.8/19XY/ZMPa |
|---|---|
| Tensile modulus | 1345.3/1233.5XY/ZMPa |
| Elongation at break | 1.9/1.7XY/Z% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 82°C |
| Glass transition (Tg) | — |
| VICAT | 106°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.