ERYONE
PLA+
PLA
Print parameters
| Nozzle | 190 °C |
|---|---|
| Bed | 55–70 °C |
| Speed | 30–100 mm/s |
| Fan | — |
| Drying (temp / time) | 70 °C / 12 h |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 51.5/14XY/ZMPa |
|---|---|
| Tensile modulus | 1805.7/1679.5XY/ZMPa |
| Elongation at break | 1.8/1.5XY/Z% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 53°C |
| Glass transition (Tg) | — |
| VICAT | 54°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.