eSUN
Epa12cf
PA-CF
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 250–290 °C |
|---|---|
| Bed | 60–100 °C |
| Speed | ≤ 200 mm/s |
| Fan | 10–20 % |
| Drying (temp / time) | — |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/38.2XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –/18.2XY/Z% |
| Flexural strength | 64.1/–XY/ZMPa |
| Impact strength | 7/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 131.9°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.