eSUN
Epaht Cf
PAHT-CF
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 260–300 °C |
|---|---|
| Bed | 45–80 °C |
| Speed | ≤ 100 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 70 °C / 12 h |
| Density | 1.4 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 173.37MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 8.93% |
| Flexural strength | 171.64MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 190°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.