Extrudr
FLAX
PLA
Composition / filler: flax fiber
Print parameters
| Nozzle | 180–240 °C |
|---|---|
| Bed | 20–60 °C |
| Speed | 20–200 mm/s |
| Fan | 30–100 % |
| Drying (temp / time) | — |
| Density | 1.45 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 43MPa |
|---|---|
| Tensile modulus | 3400MPa |
| Elongation at break | 22.3% |
| Flexural strength | 30MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 48°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.