Fiberlogy
FiberWood
PLA
Composition / filler: wood
Print parameters
| Nozzle | 180–200 °C |
|---|---|
| Bed | 50–70 °C |
| Speed | — |
| Fan | 75–100 % |
| Drying (temp / time) | 50 °C / 6 h |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 26MPa |
|---|---|
| Tensile modulus | 3600MPa |
| Elongation at break | 0.9% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 50°C |
| Glass transition (Tg) | — |
| VICAT | 65°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.