Filament PM
TPE 32
TPE
Composition / filler: thermoplastic elastomer na bázi polyolefinu
Print parameters
| Nozzle | 220–240 °C |
|---|---|
| Bed | 0 °C |
| Speed | 10–20 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 0.88 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 650% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 32D Shore |
| HDT (heat deflection) | 100°C |
| Glass transition (Tg) | — |
| VICAT | 100°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.