Filatech
PC
PC
Requires enclosure
Print parameters
| Nozzle | 270–310 °C |
|---|---|
| Bed | 90–120 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 66MPa |
|---|---|
| Tensile modulus | 2400MPa |
| Elongation at break | –% |
| Flexural strength | 97MPa |
| Impact strength | 75kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 125°C |
| Glass transition (Tg) | 145 °C |
| VICAT | 144°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.