Fillamentum
PC/ABS
PC-ABS
Requires enclosure
Print parameters
| Nozzle | 260–280 °C |
|---|---|
| Bed | 90–105 °C |
| Speed | 30–55 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 42MPa |
|---|---|
| Tensile modulus | 2000MPa |
| Elongation at break | 7% |
| Flexural strength | 68MPa |
| Impact strength | 53kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 113°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.