FILOALFA
ALFALOY 31
PC
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 260–290 °C |
|---|---|
| Bed | 80–90 °C |
| Speed | 40–60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 35% |
| Flexural strength | 75MPa |
| Impact strength | 55kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 100°C |
| Glass transition (Tg) | — |
| VICAT | 115°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.