FormFutura
ApolloX Foaming
ASA
Requires enclosure
Print parameters
| Nozzle | 220–285 °C |
|---|---|
| Bed | 50–90 °C |
| Speed | 10–200 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | 70 °C / 12 h |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 42MPa |
|---|---|
| Tensile modulus | 1800MPa |
| Elongation at break | 35% |
| Flexural strength | 64MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 86°C |
| Glass transition (Tg) | — |
| VICAT | 94°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.