FormFutura
EasyFil ePLA
PLA
Print parameters
| Nozzle | 200–275 °C |
|---|---|
| Bed | 50–60 °C |
| Speed | 25–300 mm/s |
| Fan | 80–100 % |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 60MPa |
|---|---|
| Tensile modulus | 3500MPa |
| Elongation at break | 6% |
| Flexural strength | 83MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | 60 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.