FormFutura
LUVOCOM 3F PAHT KK 50056 FR
PA
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 270–300 °C |
|---|---|
| Bed | 90–110 °C |
| Speed | 30–70 mm/s |
| Fan | 0–25 % |
| Drying (temp / time) | 80 °C / 12 h |
| Density | 1.49 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 55MPa |
|---|---|
| Tensile modulus | 6000MPa |
| Elongation at break | 1.2% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 90°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.