FormFutura
Premium ASA
ASA
Requires enclosure
Print parameters
| Nozzle | 275–290 °C |
|---|---|
| Bed | 90–110 °C |
| Speed | 50–200 mm/s |
| Fan | 15–50 % |
| Drying (temp / time) | 70 °C / 12 h |
| Density | 1.08 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 44MPa |
|---|---|
| Tensile modulus | 1850MPa |
| Elongation at break | 33% |
| Flexural strength | 65MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 86°C |
| Glass transition (Tg) | — |
| VICAT | 95°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.