FormFutura
ReForm - rPET
PETG
Requires enclosure
Print parameters
| Nozzle | 230–255 °C |
|---|---|
| Bed | 60–80 °C |
| Speed | 25–120 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | 52 °C / 12 h |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 59MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 400% |
| Flexural strength | 68MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 70°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.