FormFutura
STYX PA6
PA
Requires enclosure
Print parameters
| Nozzle | 255–285 °C |
|---|---|
| Bed | 90–110 °C |
| Speed | — |
| Fan | 0–30 % |
| Drying (temp / time) | — |
| Density | 1.15 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50MPa |
|---|---|
| Tensile modulus | 2900MPa |
| Elongation at break | 1.9% |
| Flexural strength | 112MPa |
| Impact strength | 6.8kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 60°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.