FormFutura
STYX PA6-CF15
PA-CF
Requires hardened nozzle
Print parameters
| Nozzle | 255–295 °C |
|---|---|
| Bed | 90–110 °C |
| Speed | — |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 1.18 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 120MPa |
|---|---|
| Tensile modulus | 9000MPa |
| Elongation at break | 4% |
| Flexural strength | 180MPa |
| Impact strength | 4kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 65°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.