Forward AM
Ultrafuse PET
PET
Print parameters
| Nozzle | 210–230 °C |
|---|---|
| Bed | 60–80 °C |
| Speed | 40–80 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 16 h |
| Density | 1.329 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 33.4MPa |
|---|---|
| Tensile modulus | 1933MPa |
| Elongation at break | 2.7% |
| Flexural strength | 66.7MPa |
| Impact strength | 1.6kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 64°C |
| Glass transition (Tg) | 71 °C |
| VICAT | 66°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.