Forward AM
Ultrafuse rPET
PETG
Print parameters
| Nozzle | 225–245 °C |
|---|---|
| Bed | 65–85 °C |
| Speed | 30–60 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 8 h |
| Density | 1.287 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 38.6MPa |
|---|---|
| Tensile modulus | 1640MPa |
| Elongation at break | 4.3% |
| Flexural strength | 66.9MPa |
| Impact strength | 4kJ/m² |
| Hardness | D 69 Shore |
| HDT (heat deflection) | 69°C |
| Glass transition (Tg) | 83 °C |
| VICAT | 73°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.