Francofil
TPE 88A
TPE
Print parameters
| Nozzle | 220–240 °C |
|---|---|
| Bed | 0–30 °C |
| Speed | 10–35 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.17 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 6.34MPa |
|---|---|
| Tensile modulus | 20.6MPa |
| Elongation at break | 330% |
| Flexural strength | 1.8MPa |
| Impact strength | 8.1kJ/m² |
| Hardness | 88A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.