igus
iglidur I190
PA
Requires hardened nozzle
Composition / filler: PA-based tribofilament, friction coefficient μ=0.18-0.25 vs steel
Print parameters
| Nozzle | 265–280 °C |
|---|---|
| Bed | 70–80 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 70 °C / 24 h |
| Density | — |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.