Jabil Engineered Materials
PETG 0800 ESD
PETG
Composition / filler: PETG + ESD additive (10⁵–10⁹ Ω/sq surface resistance)
Print parameters
| Nozzle | — |
|---|---|
| Bed | — |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 65 °C / 6 h |
| Density | 1.28 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 46.9MPa |
|---|---|
| Tensile modulus | 1710MPa |
| Elongation at break | 11% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 71°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.