Material4Print
PET-CF
PET-CF
Requires enclosureRequires hardened nozzle
Composition / filler: PET + 15% carbon fiber
Print parameters
| Nozzle | 260–290 °C |
|---|---|
| Bed | 80–100 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 100 °C / 10 h |
| Density | 1.4 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 80MPa |
|---|---|
| Tensile modulus | 9000MPa |
| Elongation at break | 2.5% |
| Flexural strength | 130MPa |
| Impact strength | 40kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.