Mingda
HtPA-GF
PA-GF
Requires hardened nozzle
Print parameters
| Nozzle | 300–320 °C |
|---|---|
| Bed | 70–90 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 90 °C / 6 h |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 83.45MPa |
|---|---|
| Tensile modulus | 4796MPa |
| Elongation at break | 2.08% |
| Flexural strength | 125.06MPa |
| Impact strength | 6.24kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 101°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.