Mingda
PETG-HF
PETG
Print parameters
| Nozzle | 230–260 °C |
|---|---|
| Bed | 70–80 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 70 °C / 5 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | 1780MPa |
| Elongation at break | 10.1% |
| Flexural strength | 62.8MPa |
| Impact strength | 13.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 73°C |
| Glass transition (Tg) | 78 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.