Nanovia
PC-ABS V0
PC/ABS
Requires enclosure
Print parameters
| Nozzle | 260–290 °C |
|---|---|
| Bed | 120 °C |
| Speed | 20–60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.18 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 43MPa |
|---|---|
| Tensile modulus | 2510MPa |
| Elongation at break | 5% |
| Flexural strength | –MPa |
| Impact strength | 50kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.