Nanovia
PEI CF Ultem 1010
PEI-CF
Requires enclosureRequires hardened nozzle
Composition / filler: PEI (Ultem 1010) + carbon fibers
Print parameters
| Nozzle | 370–400 °C |
|---|---|
| Bed | 150 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | 4685MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 200°C |
| Glass transition (Tg) | — |
| VICAT | 215°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.