Nanovia
PLA EF 3D850
PLA
Composition / filler: PLA Ingeo 3D850 grade
Print parameters
| Nozzle | 190–210 °C |
|---|---|
| Bed | 50–70 °C |
| Speed | 20–60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 58/48XY/ZMPa |
|---|---|
| Tensile modulus | 3540/3185XY/ZMPa |
| Elongation at break | 2.6/2.4XY/Z% |
| Flexural strength | –MPa |
| Impact strength | 1.18kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 85°C |
| Glass transition (Tg) | 57.5 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.