NinjaTek
Cheetah
TPU
Print parameters
| Nozzle | 225–250 °C |
|---|---|
| Bed | ≤ 50 °C |
| Speed | 25–80 mm/s |
| Fan | — |
| Drying (temp / time) | 125 °C / — |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 39MPa |
|---|---|
| Tensile modulus | 26MPa |
| Elongation at break | 580% |
| Flexural strength | –MPa |
| Impact strength | 19.1kJ/m² |
| Hardness | 95A Shore |
| HDT (heat deflection) | 74°C |
| Glass transition (Tg) | -24 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.