Nobufil
ASAx-CF
ASA
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 270–290 °C |
|---|---|
| Bed | 100–120 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 65 °C / 4 h |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 26MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 9% |
| Flexural strength | 38MPa |
| Impact strength | 3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 104°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.