Polymaker
Fiberon ASA-CF08
ASA-CF
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 260–280 °C |
|---|---|
| Bed | 90–100 °C |
| Speed | ≤ 350 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 90 °C / 6 h |
| Density | 1.09 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/25XY/ZMPa |
|---|---|
| Tensile modulus | 3611.7MPa |
| Elongation at break | 1.8% |
| Flexural strength | 69.1MPa |
| Impact strength | 5.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 97.3°C |
| Glass transition (Tg) | 106.6 °C |
| VICAT | 110.8°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.