Polymaker
Fiberon PET-CF17
PET-CF
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 270–300 °C |
|---|---|
| Bed | 70–80 °C |
| Speed | 300 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 100 °C / 10 h |
| Density | 1.34 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/27.9XY/ZMPa |
|---|---|
| Tensile modulus | 5481MPa |
| Elongation at break | 2.4% |
| Flexural strength | 109.3MPa |
| Impact strength | 5.1kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 147.5°C |
| Glass transition (Tg) | 79.3 °C |
| VICAT | 238.4°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.