Polymaker
PLA-Pro
PLA
Print parameters
| Nozzle | 210–230 °C |
|---|---|
| Bed | 30–60 °C |
| Speed | 300 mm/s |
| Fan | 100 % |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.237 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/25.39XY/ZMPa |
|---|---|
| Tensile modulus | 2531.08MPa |
| Elongation at break | 16.57% |
| Flexural strength | 62.12MPa |
| Impact strength | 20.76kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55.6°C |
| Glass transition (Tg) | 58.3 °C |
| VICAT | 63.5°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.