PrimaCreator
PrimaSelect PLA Satin
PLA
Print parameters
| Nozzle | 210–230 °C |
|---|---|
| Bed | 30–60 °C |
| Speed | 40–80 mm/s |
| Fan | 50–100 % |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 32MPa |
|---|---|
| Tensile modulus | 4000MPa |
| Elongation at break | 30% |
| Flexural strength | 60MPa |
| Impact strength | 19.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 53°C |
| Glass transition (Tg) | 60 °C |
| VICAT | 60°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.