PrimaCreator
PrimaSelect PLA Tough
PLA
Print parameters
| Nozzle | 210–225 °C |
|---|---|
| Bed | 60–80 °C |
| Speed | — |
| Fan | 100 % |
| Drying (temp / time) | — |
| Density | 1.21 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/33XY/ZMPa |
|---|---|
| Tensile modulus | 2750MPa |
| Elongation at break | 27% |
| Flexural strength | 72MPa |
| Impact strength | 29.8kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 57°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.